-
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT X PFS “EBS” External Brushless System – 2500HP Capable
$2,379.99 – $2,719.99Price range: $2,379.99 through $2,719.99VTT x PFS EBS (External Brushless System) Fuel System
VTT, in collaboration with Performance Fueling Solutions (PFS), is proud to introduce the PFS EBS ā External Brushless System.
The EBS is a fully stand-alone, next-generation brushless fuel system available in both platform-specific and universal fitments. Built around state-of-the-art Protec brushless pump technology, this system is capable of supporting up to 2,500 HP on ethanol-based fuels ā and even more on gasoline or ethanol blends.
With its compact 15" x 10" footprint and ultra-lightweight construction, the PFS EBS is engineered for performance without compromise. The complete system ā including pumps, surge tank, FPR, controllers, and wiring harness ā weighs in at under 10 lbs (dry), thanks to a carbon fiber mounting plate and carefully chosen lightweight materials.
EBS Bench Testing Video:
EBS Bench Test Video -
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Upgraded Silicone G8X (S58) coolant hose kit
$189.99 – $799.99Price range: $189.99 through $799.99VTT Upgraded Silicone G8X (S58) Coolant Hose Kit
Available in BLACK as of 3/12/26 with RED, BLUE, and ORANGE coming very soon!
Upgrade the Weak OEM Plastic Coolant Connectors on Your BMW S58
The issue with the factory S58 coolant system is not the rubber hoses themselves ā itās the OEM plastic quick-connect fittings. Over time, these plastic connectors can become weak, crack, or fail, especially in high-heat performance environments.
VTTĀ offers an upgraded 6-ply silicone coolant hose kit for the BMW S58 platform, featuring CNC-machined billet aluminum connectors for improved durability, reliability, and long-term performance.
This kit is designed as a direct replacement for multiple factory coolant hoses and connector assemblies shown in the OEM BMW cooling system diagram.
Beyond improving reliability, these hoses also add a splash of color to your engine bay, giving the S58 a cleaner and more performance-focused appearance.
Order the complete kit for a savings of almost 15%!
-
Quick View
Stop the Flex. Launch with Confidence.
Soft bushings are the enemy of hard launches and drivetrain longevity. The factory BMW transfer case bushings on the F9X M5/M8 platform are notoriously softāexactly the opposite of what you want when you're putting serious power to the ground.
Sure, you could replace the entire bushing with a solid one, but that often requires lowering or removing the transfer caseānot to mention the added NVH (noise, vibration, and harshness) that comes with it.
Our VTT transfer case bushing inserts offer a smarter solution: reduce bushing flex without sacrificing comfort. You keep smooth, quiet drivability around town and at idleābut when itās time to launch, the transfer case stays planted.
-
Quick View
VTT Hurricane Billet One-Way Crankcase Breather
VTT is proud to introduce the first and only plug-and-play ONE-WAY crankcase breather kit for Hurricane engine applications!
This breather is a simple yet effective upgradeājust remove your oil cap, install the breather, and instantly free up horsepower. It improves turbo draining, ring seal, eliminates crankcase pressure, and enhances your engine bay's aesthetics. Fits with the engine cover on, and you can remove/install the cover without taking off the breather.
Key Features & Benefits:
ā Easy Installation ā Plug-and-play design; installs in minutes
ā Reduces Crankcase Pressure ā Improves turbo performance & engine efficiency
ā Compatible with Stock or Aftermarket PCV Systems ā Can be used alone or paired with the VTT Engine Catch Can for maximum crankcase pressure relief
ā High-Quality Construction ā- 6061-T6 Aircraft-Grade Aluminum with a durable black anodized finish
- Four Stainless Steel Baffles for superior oil control
- PTFE One-Way Check Ball to ensure proper ventilation
- Premium Filter & Clamp to maintain performance and longevity
-
Quick View
VTT Billet 2025+ Ram 1500 Hurricane Dual Catch Can System
(THIS SYSTEM CURRENTLY ONLY FITS SO ENGINES, HO IS COMING SOON)
Itās well known that direct-injected engines are prone to intake valve carbon buildup due to oil vapors being pulled through the factory PCV (Positive Crankcase Ventilation) and CCV (Crankcase Ventilation) systems. While the factory design attempts to mitigate this, it falls short in fully preventing oil contamination.
This results in:
ā Oil accumulation in the intake manifold (PCV/Low Side)
ā Oil entering the turbochargers and charge pipes (CCV/High Side)
ā Excess carbon buildup on intake valves
ā Oily charge pipes, turbo inlets, and degraded performanceThe Ultimate Solution ā VTTās Dual Catch Can System
The most effective way to prevent oil contamination and carbon buildup is with a catch can system. Our system filters oil from blow-by gases before they re-enter the engine.
Unlike most aftermarket catch cans that only address the high side (CCV)āwhich operates under boostāour system features two catch cans for complete protection:
š¹ Low Side (PCV) ā Captures oil vapors at idle and cruise
š¹ High Side (CCV) ā Captures oil vapors under boostThis ensures a clean intake tract, charge pipes, and intake valves throughout your vehicleās lifespan.
Install Video - Link
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT HO Hurricane Billet Intake Manifold
Designed for the 3.0L Twin Turbo Dodge / Stellantis Hurricane Engine
Direct bolt-on to the HO engines, will fit the SO as well, but modifications will be required!VTT is proud to introduce our ground-up engineered Hurricane Billet Intake Manifold ā purpose-built specifically for the new generation Stellantis 3.0L Hurricane platform.
This is not a modified stock Intake
This is not a sheet metal welded manifold
This is a fully CNC-machined, aerospace-grade billet manifold engineered from scratch for high-boost, high-flow performance applications.
Engineered for the Next Generation
Using advanced CAE and multi-physics simulation under both steady and transient load conditions, we optimized runner geometry, plenum volume, and internal flow paths to support the airflow demands of modern twin-turbo or single-turbo hurricane builds.
The result is:
-
Superior top-end flow over the OEM composite unit
-
Improved cylinder-to-cylinder distribution
-
Increased plenum stability under high boost
-
Clean integration with factory systems
Designed to install cleanly and function properly without compromise.
Injector specs for PI - 48mm Length - 14mm Top - 14mm Lower O-Ring
-
-
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT F9X M5/M8 S63 BOV Kit
$999.99Original price was: $999.99.$899.99Current price is: $899.99.VTT F9X M5 / M8
Blow-Off Valve (BOV) Kit ā S63 Engine
Fits BMW F90 M5 & F91 / F92 / F93 M8 (All Trims)
Why the S63 Needs a Proper Blow-Off Valve
As capable as the S63 platform is in the F9X M5 and M8, one critical component is missing from the factory configuration: a true diverter valve (DV) or blow-off valve (BOV) to properly vent excess boost pressure during throttle lift.
From the factory, the S63 relies on Valvetronic to manage pressure relief. While this strategy works from an OEM drivability standpoint, it is not an effective method of fully venting boost pressure. Under higher load, rapid throttle closures, or tuned conditions, this can lead to compressor surge, increased stress on the turbochargers, and reduced turbocharger longevity over time.
The VTT BOV Kit adds the missing mechanical venting solution the S63 needs. By properly evacuating excess boost pressure during throttle lift, this system:
-
Reduces compressor surge
-
Protects turbochargers under aggressive driving
-
Improves long-term reliability
-
Delivers the signature BOV sound enthusiasts expect
This is a functional upgrade firstāsound is simply the byproduct.
If upgrading Turbos on your F9x, this kit is something we feel is required to increase longevity
-
-
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewBMW F9X M5-M8 S63 Turbo-Forward Full Flow Intake System ā VTT Complete Billet Turbo Inlet & Dual 4ā Filter Upgrade
$1,099.99Original price was: $1,099.99.$999.99Current price is: $999.99.VTT F9X M5 / M8
Complete Turbo-Side Intake System (S63)
VTT is proud to offer a true full turbo-side intake system for the BMW F9X M5 and M8 platforms, equipped with the S63 engine, that eliminates every factory airflow restriction from the turbocharger inlet all the way to the air filter.
Most intake kits on the market only replace the upper airbox or filter section, while leaving the restrictive factory molded plastic turbo inlet piping in place. That turbo-side inlet is the primary airflow choke point on the S63 platformāmeaning those kits only address half of the problem.
Our system replaces the entire factory intake tract, starting directly at the turbochargers, with precision-machined 6061-T6 billet adapters that bolt straight to the compressor inlets. Airflow then transitions smoothly into reinforced 2.5ā ā 4ā high-temperature silicone tubing, finishing with dual VTT 4ā dry-element air filters.
This is a true unrestricted intake systemāno factory bottlenecks left behindāallowing the S63 to breathe properly under both stock and increased airflow demand.
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Billet Non-Marring Double Ended AN wrenches
$12.99 – $149.99Price range: $12.99 through $149.99Secure Your AN Fittings the Right Way ā Without the Damage
VTT now offers a complete line of precision Billet 6061-T6 Aluminum AN Wrenches, designed to grip without marring your fittings. Whether you're working with -3 or -20 AN sizes, we've got you covered.These wrenches are lightweight, durable, and anodized in 8 vibrant colors for a long-lasting finish and easy size identification.
Available Options:
-
Full Kit: Includes all sizes from -3 to -20
-
Common Size Kit: Includes -4, -6, -8, -10, and -12
-
Individual Wrenches: Purchase only the sizes you need
-
-
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewBMW G90/G99 M5 S68 Turbo-Forward Full Flow Intake System ā VTT Complete Billet Turbo Inlet & Dual 4ā Filter Upgrade
$1,099.99Original price was: $1,099.99.$899.99Current price is: $899.99.VTT G90/G99 M5 Complete Turbo-Side Intake System
VTT is proud to announce the first and only intake system for the G90/G99 M5 that eliminates every factory restriction from turbo to filter. Other āintake kitsā on the market only replace the upper half of the system ā leaving the restrictive factory turbo inlet piping in place. That is the actual primary airflow choke pointā¦ meaning those kits only solve half the problem.
Our system removes the entire factory tract and replaces it with precision-engineered billet 6061-T6 adapters that bolt directly to the turbochargers, transitioning into reinforced 2.5ā ā 4ā high-temp silicone and finishing with dual VTT 4ā dry element filters.
This is a true full-flow system ā no factory bottlenecks ā the S68 finally breathes correctly.
Color Options (Make Your Engine Bay Stand Out)
Available silicone colors: Black, Red, Blue, White, Orange
Key Benefits
-
FULL unrestricted flow from turbo outlet all the way to filter
-
Completely eliminates every factory intake bottleneck
-
Major improvement in turbo induction sound
-
Billet 6061-T6 turbo adapters anodized in black
-
High-quality 7-ply silicone construction
-
Direct bolt-on, retains all sensors and PCV functions
-
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB Aluminum V-Band Flanges / Complete Assemblies
$17.99 – $31.99Price range: $17.99 through $31.99Looking to get rid of problematic hose connections, and have a secure charge pipe tract with upwards of 200psi rated pressure? We got you covered with our Billet Aluminum V-band flanges. These flanges are made from 6061-T6 and come raw for easy welding. Utilize a male, and female stepped design with an Oring seal for the ultimate in reliability. Optional clamp is also available. Sizes offered:- 2"
- 2.5"
- 3"
-
Sale!Quick View
VTT Billet B58/S58 HPFP Block off plates
$129.99Original price was: $129.99.$99.99Current price is: $99.99.VTT B58/S58 HPFP Block-Off Plate Kit
If youāre converting your B58 or S58 build to port injection (PI) only and removing the direct injection (DI) system and high-pressure fuel pumps (HPFPs), youāll need to properly seal the HPFP ports in the valve cover.
Our billet aluminum block-off plates provide a simple, clean solution.
Just remove the HPFP and cam follower, then install the plate ā it seals the valve cover and eliminates the HPFP cleanly and securely.Please Note:
-
Removing the HPFP typically requires a standalone ECU.
-
If youāre only removing a single HPFP (such as on the S58), a tune adjustment will be necessary for proper operation.
-
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT B58/S58 Head Port Block-Off Kit or Billet check valve kit
$29.99 – $69.99Price range: $29.99 through $69.99VTT B58/S58 Head Port Block-Off / Built Check Valve Kit
The VTT B58/S58 Head Port Block-Off / Check Valve Kit is designed to either seal off or convert the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases ā but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time.
This kit provides two configuration options:
-
Block-Off Version ā Completely seals the factory head ports to prevent oil intrusion and unwanted vacuum leaks.
-
Billet Check Valve Version ā Converts the head ports into a robust internal PCV system using precision-engineered check valves. These one-way valves allow vacuum to function as intended while blocking boost pressure from entering the crankcase or charge tract.
By bypassing the factory PCV valve in the valve cover, the VTT kit replaces it with an improved three-valve internal system integrated directly into the cylinder head. This design improves reliability, simplifies plumbing, and ensures consistent crankcase pressure management ā critical for both stock and high-performance B58/S58 applications. This kit does NOT require any tapping, meaning no metal to get into the engine etc. You simply tap the plugs or check valves into place.
Key Features
-
Eliminates oil draw-through into the intake manifold
-
Prevents carbon buildup on intake valves
-
Converts to an internal, head-integrated PCV system
-
Utilizes precision-machined check valves for boost sealing
-
Fully reversible ā Block-offs or valves can be removed if needed
- No tapping is required. Easy install, by tapping the blocks or valve into place.
-
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT BMW 5X132 G90/G99 M5 Conversion Wheel Spacers
$59.99 – $69.99Price range: $59.99 through $69.99Looking to convert your G90/G99 M5ās 5Ć132 bolt pattern to more common 5Ć112 or 5Ć114.3 wheels and open up your wheel options dramatically? Weāve got you covered with our VTT wheel spacer conversion kits.
These kits are CNC-machined from billet 6061-T6 aluminum and anodized for a long-lasting finish. We press in class 10.9 studs with a corrosion-resistant zinc coating for years of reliable use.
Each spacer allows you to bolt on either 5x112 or 5x114.3 wheels while maintaining proper hub-centric fitment. No wobble bolts or redrilling required.
Options & Specs:
-
Available in 15mm, 17.5mm, and 20mm thicknesses
-
Hub bore: 66.6mm (Hub-centric adapter rings available for other sizes)
-
Studs: M14x1.5
-
Stud length: 40mm total
-
Includes black open-ended 19mm lug nuts
QTY 1 is for ONE SPACER. If you need to do 4 wheels order FOUR!
We offer Hub-Centric adapter rings to fit other wheel bore sizes
-
-
Sale!Quick View
VTT Billet B58 (TU) HMM (Coolant Unit) Delete kit
$249.99Original price was: $249.99.$199.99Current price is: $199.99.VTT B58 (TU) HMM Delete Plate
Looking to build a race car with a B58 engine?
Doing a B58 swap and donāt want the complicated BMW Heat Management Module (HMM)?
Need a simple -16AN or -20AN line setup instead of the factory tangle?If so, the VTT B58 (TU) HMM Delete Plate is exactly what you need.
This kit eliminates the bulky OEM Heat Management Module and replaces it with a clean billet block-off solution. The included rear water pump plug and hold-down bracket ensure proper sealing, while the modular -16ORB port allows you to run your choice of -16AN, -20AN, or any compatible fitting. Build your lines, run them to the radiator, add an inline thermostat if desired ā and enjoy a vastly simplified, race-ready B58 cooling system.
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Plug-and-Play S68 Uprgaded DV Kit
$349.00 – $698.00Price range: $349.00 through $698.00VTT BMW S68 Upgraded DV Kit
For G90, G99, XM, and all S68-powered models
Looking to wake up your S68-powered BMW ā G90 M5, G99 M5 Touring, XM, or other variant ā while improving boost control and ditching those restrictive plastic factory diverter valves?
Weāre proud to introduce the VTT Upgraded DV Kit for the BMW S68 ā designed for enthusiasts who want better performance, quicker boost recovery, and the option for that addictive BOV soundtrack.Our kit replaces one or both factory DVs with high-quality billet Turbosmart units, available in:
-
Plumb Back (OEM-style recirculation ā no added noise)
-
Dual Port (atmospheric vent ā signature BOV sound)
Choose the setup that fits your goals and installation comfort:
-
-
Sale!Quick View
VTT Plug and Play S58 Single HPFP Conversion Kit
$349.00Original price was: $349.00.$299.00Current price is: $299.00.VTT Plug and Play S58 Single HPFP Conversion Kit
The Only Proven Solution to S58 Exhaust Cam Timing Drift ā Without Locking the Cam! Tested at over 1400WHP!
We are proud to introduce the first and only kit on the market that completely resolves the notorious S58 exhaust cam timing drift at high RPM ā all without sacrificing the benefits of variable valve timing by locking the cam.
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewHurricane TT I6 Oil and Coolant Adpater Fittings
$39.99 – $59.99Price range: $39.99 through $59.99Upgrade Your Hurricane TT I6 with Ease ā AN Line Adapter Fittings
Planning to install aftermarket turbochargers on your Hurricane TT I6 and want a hassle-free solution for routing your oil and coolant lines? We've got you covered.
These precision-machined adapter fittings make it simple to convert your factory ports to standard AN line connections:
-
Oil Feed: Converts to -4 AN male
-
Coolant Ports: Converts to -6 AN male
-
Oil Drain: Converts to -10 AN male
Part Numbers:
-
VTT-FAB-126 ā Oil Feed Adapter (-4 AN Male)
-
VTT-FAB-127 ā Coolant Adapter (-6 AN Male)
-
VTT-FAB-084 ā Oil Drain Adapter (-10 AN Male)
Fitment:
Compatible with all Hurricane TT I6 engines, including Standard Output (SO) and High Output (HO) variants. -
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT HIGH-FLOW -16 Catch Can System
$499.00 – $649.00Price range: $499.00 through $649.00VTT -16 Billet HIGH-FLOW Catch Can System
Maximum Venting for Maximum Power
VTT is proud to introduce our -16 Billet High-Flow Catch Can System ā designed from the ground up for high-horsepower applications requiring serious crankcase ventilation. Whether you're pushing over 900WHP or beyond 2000WHP, this system delivers unmatched performance, reliability, and engine bay cleanliness.
Key Features:
-
Supports -16 AN lines (with optional -12 or -20 fittings)
- 20 Fluid OZ capacity
-
Engineered for big-power builds needing high crankcase pressure relief
-
Triple-stage filtration system to eliminate oil mist ā even in the event of engine failure
-
Designed, tested, and proven to keep oil inside the catch can ā not in your engine bay
Triple Filtration Technology:
-
Stage 1 - Stainless steel filter ā captures 95% of oil mist on entry
-
Stage 2 - Perforated diffuser plate ā further disperses and slows down airflow
-
Stage 3 - Final stainless mesh layer ā scrubs out any remaining vapor before venting
This advanced system has been tested with over 200 PSI of pressure and more than half a quart of oil without releasing a trace of oil mist. As long as the catch can is properly serviced and not overfilled, even catastrophic engine failure wonāt result in a mess under your hood.
Application-Specific Kits Available:
We offer plug-and-play kits for popular platforms, including:
-
G8X M2/M3/M4 (S58) SINGLE TURBO ONLY
-
F9X X3M/X4M SINGLE SINGLE TURBO ONLY
-
A9X Toyota Supra
Each kit includes everything needed for installation: catch can, vehicle-specific bracket, fittings, hoses, and optional drain. Again: Plug-and-play kits include ALL required parts. Bracket, fittings, line, etc. No additional fittings are required except the drain if wanted.
-
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdd a Touch of Style & Performance to Your Hurricane Engine Bay
Upgrade your engine bay with the VTT Billet Aluminum Oil Cap, designed for both function and form. Machined from high-grade 6061-T6 billet aluminum and anodized in your choice of Black, Red, Blue, or Clear, these caps deliver a premium look with a durable, long-lasting finish.Whether you're at a show or under the hood, this is a small detail that makes a big statement.
Features:
āļø Precision-machined from 6061-T6 billet aluminum
āļø Anodized in 4 vibrant colors for corrosion resistance and visual impact
āļø Direct replacement ā simply remove your stock cap and screw this one onFitment - ALL Hurricane engines SO andĀ HO
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT S58 Plug and Play Coolant Pressure Sensor Kit
$39.99 – $139.99Price range: $39.99 through $139.99VTT S58 Plug-and-Play Coolant Pressure Sensor Kit ā For Single Turbo Setups
Building a high-boost single turbo S58 and need to monitor coolant pressure? VTT has the simplest and most effective solution.
This billet fitting replaces the coolant block-off plug at the front of the head when converting to a single turbo, giving you a clean, direct port to monitor coolant pressure right from the cylinder head.
Just thread your sensor into the included 90Ā° fitting, install it onto the adapter, and mount it in placeāperfect for real-time pressure monitoring via tuning platforms like BM3 Rev2 or others that support external sensor inputs.
š¦ Kit Options:
Available with or without sensor, and includes:
-
ā (1) Billet Coolant Adapter Fitting with 1/8" NPT Threads
-
ā (1) 90Ā° Male-to-Female Fitting for Low-Profile Sensor Mounting
-
ā (Optional) 75 PSI Pressure Sensor with Plug and Terminals
-
-
Quick View
VTT G8X Billet Oil Cooler Adapter Fittings ā Convert to -10AN
Looking to upgrade your G8X to a larger external oil cooler or simply replace the bulky factory hard lines with clean, braided -AN lines? VTT has the solution.
Our Billet Oil Cooler Adapter Fittings allow you to convert both sides of the factory system to -10AN maleāfrom the oil filter housing to the inlets and outlets on the factory oil cooler.
Whether you're building a full drag car with no cooler or a track-focused setup with a large front-mount oil cooler, these adapters paired with our S58 Remote Oil Filter Kit give you full flexibility to configure your oiling system your way.
š§ Kit Includes:
-
(2) Billet -10AN Adapter Fittings (for either the oil filter housing or factory cooler)
Note:
If you're converting both ends (housing and cooler), youāll need 2 kits. -
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT S58 Remote Oil Filter Kit
$149.00 – $399.00Price range: $149.00 through $399.00VTT Remote Oil Filter Kit ā BMW S58
VTT is excited to introduce our Remote Oil Filter Kit for the BMW S58 engineāengineered to simplify oil filter access, streamline plumbing, and reduce weight and complexity. This kit removes the factory oil filter housing and relocates the filter underneath the vehicle, allowing for easy access and the use of a standard spin-on filter.The filter IS ACCESSIBLE even with the aluminum belly pan on, as long as you are not running a stock-style cross over downpipe.
ā ļø Important Note:
This kit deletes the factory oil cooler unless you choose to plumb it back in yourself. It is intended primarily for drag racing applications, where oil cooling is not needed for short-duration runs. For street, circuit, or road racing, an oil cooler is highly recommended. -
Quick View
VTT/PFS Stainless Steel Fuel Strainer for Walbro In-Tank Pumps
The fuel system is one of the most critical components of your entire buildāit delivers the fuel that translates into big power and fast times! Without proper filtration, your Walbro 274, 285, or 295 fuel pump can ingest contaminants, leading to premature failure. However, choosing the right strainer or pre-filter is just as important as post-filtration. šØ Why Does Your Fuel Pump Need the Right Strainer? ā Too fine of a filter can restrict flow and cause the inlet to collapse. ā Too coarse of a filter can allow debris to pass through, damaging the pump and engine. ā Low-quality materials can break down, collapse, or cause fueling issuesāleading to potential engine failure.The VTT/PFS Stainless Steel Fuel Strainer ā The Ultimate Solution
-
Quick ViewIntroducing the VTT Remote Oil Cooler Plate for BMW B58 Engines Need extra oil cooling for your track-oriented B58 build or simply looking for better cooling capacity in high-temperature climates? If so, youāre likely considering running an external or upgraded oil cooler on your BMW B58-powered vehicle. However, BMWās design doesnāt make this easyāthe heat exchanger is built directly into the oil filter housing. Thatās where the VTT Remote Oil Cooler Plate comes in. This innovative solution allows you to easily and conveniently remove the factory coolant-supplied heat exchanger on the oil filter housing and replace it with -10AN or -8AN fittings, simplifying the process of running your oil cooler lines. No need to worry about looping the coolantāour plate features a built-in housing that seamlessly loops the coolant circuit for a hassle-free installation.
Key Features:
- Convenient Oil Cooler Integration: Add a remote oil cooler to your BMW-powered vehicle (Gen 1 and Gen 2 B58 engines).
- Flexible Plumbing Options: Includes -8AN or -10AN fittings for easy line routing.
- Built-In Coolant Loop: Eliminates the need to manually loop the coolant circuit, simplifying installation.
- Direct Plug-and-Play Replacement: No modifications or retrofitting required.
- Optional Fittings Available: Choose with or without fittings based on your setup.
- Optional factory gaskets
Whatās Included:
- One Block-Off Plate with Coolant Loop Housing
- Six M6 Bolts
- Optional -10AN or -8AN Fittings
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-Boost Crankcase Ventilation Adapter for BMW Engines Building or running a high-boost, high-powered BMW engine? Boost increases crankcase pressure, which, if left unchecked, can lead to issues such as smoking, power loss, and even engine failure. Adequate venting is essential for optimal performance and engine health. These are designed to connect directly to S58/B58(TU) stock VC, or screw into ANY VTT Billet or Cast VC While some believe a -10AN vent is sufficient for these builds, the truth is: itās not. To address this, we developed a larger, more effective solution for our buildsānow available for everyone. Our Oil CapĀ adapter securely snaps in place, replacing your oil cap and providing a platform for a -16ORB fitting in a variety of configurations. Choose from -12AN to -20AN fittings, depending on your buildās needs. This cap is thicker than our low-profile option so care must be taken when planning hood clearance for the versatile venting options.Key Features:
- Attractive Oil cap design
- Connects to stock S58/B58(TU) VC or VTT Billet/Cast VC
- Vented, comes with multi-hole venting to knock down large oil droplets before they make their way into the catch can system
- High-performance venting: Supports configurations from -12AN to -20AN fittings.
- Customizable: Compatible with various fittings to suit your build.
Important Notes:
- This kit requires you to supply your own hose, hose ends, and catch can to complete the system.
- Some fitting options may require 4ā5 days for shipping, as we keep only select configurations in stock.
- Also fits other platforms such as B48, B46, Mini, etc. DOES NOT FIT Gen 1 B58
-
Quick ViewIntroducing VTT Solid Engine Mounts for BMW G8X VTT is proud to offer our Solid Engine Mounts, designed specifically for the BMW G8X M2/M3/M4 platforms!
Why Solid Engine Mounts?
Drivetrain movement is the enemy of high-performance vehicles. As power levels climb and 1/4-mile and lap times drop, the need for a fully solid engine mount solution became clear. These platforms are no exception, and weāve addressed the gap in the market with a robust and reliable solution. We took the factory engine mount design and engineered a solid mounting solution that fits seamlessly within the same space constraints. The result is the only solid engine mount available for these platforms.Key Benefits
- Eliminates Drivetrain Movement: These mounts completely eliminate unwanted engine and drivetrain movement during heavy launches, high-G cornering, and hard acceleration. This ensures maximum power transfer to the driveline, with no energy wasted on component movement.
- Premium Construction: Made from solid 6061-T6 aluminum, these mounts are anodized black for long-lasting corrosion resistance.
- Factory Fitment: Each kit includes two mounts that fit directly into the factory locations using factory mounting hardware.
Fitment
These mounts are compatible with G8Xplatforms including:- G8X: M2/M3/M4
Features:
- Completely eliminates engine and drivetrain movement.
- Constructed from billet 6061-T6 aluminum with a durable anodized finish.
- Plug-and-play fitment using factory mounting hardware.
Whatās Included:
- Two VTT Billet Solid Engine Mounts
Important Note on NVH
These mounts are intended for RACING purposes. Please be aware that these mounts will increase NVH (noise, vibration, and harshness). They are designed for enthusiasts seeking zero movement and are willing to sacrifice some comfort for ultimate performance. If you choose to install these in a street car, understand that the level of NVH increase will vary depending on other drivetrain components, such as transmission or transfer case mounts. Refunds will not be offered for NVH-related complaints. -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB Billet Tig Trailing Sheilds
$199.99 – $209.99Price range: $199.99 through $209.99Introducing VTT-FAB Billet TIG Trailing Shields VTT-FAB is proud to announce our Billet TIG Trailing Shields, designed to set a new standard in the trailing shield market. We identified a gap where existing options were either too expensive or made from materials that degrade, melt, or fail when exposed to hot surfaces during welding. With this in mind, we took a fresh, innovative approach and developed two high-quality trailing shields to address these issues.Product Highlights
- Premium Construction: Crafted from billet 6061-T6 aluminum and anodized in red for corrosion resistance and durability.
- Optimal Gas Coverage: Equipped with an internal diffuser and a finely calibrated screen to fully diffuse gas, ensuring optimal coverage for stronger, cleaner welds.
- Versatile Design: Two versions are available:
- Radiused Trailing Shield: Contoured to match 2.5"ā5" tubing.
- Flat Trailing Shield: Ideal for flat surfaces and other specific welding needs.
- Universal Compatibility: Suitable for all materials and designed to attach directly to your TIG torch.
- Extremely light: With fittings only 2 Oz for the flat version, and 3 Oz for the radiused!
-
Quick ViewHigh-Boost Crankcase Ventilation Adapter for S58/B58 Engines Building or running a high-boost, high-powered S58 or B58 engine? Boost increases crankcase pressure, which, if left unchecked, can lead to issues such as smoking, power loss, and even engine failure. Adequate venting is essential for optimal performance and engine health. While some believe a -10AN vent is sufficient for these builds, the truth is: itās not. To address this, we developed a larger, more effective solution for our buildsānow available for everyone. Our low-profile adapter securely snaps in place, replacing your oil cap and providing a platform for a -16ORB fitting in a variety of configurations. Choose from -12AN to -20AN fittings, depending on your buildās needs. At just 10mm thick, this adapter maximizes hood clearance for versatile venting options.
Key Features:
- Low-profile design: Only 10mm thick for maximum hood clearance.
- High-performance venting: Supports configurations from -12AN to -20AN fittings.
- Customizable: Compatible with various fittings to suit your build.
Important Notes:
- This kit requires you to supply your own hose, hose ends, and catch can to complete the system.
- Some fitting options may require 4ā5 days for shipping, as we keep only select configurations in stock.
- Also fit other platforms such as B48, B46, Mini, etc. DOES NOT FIT Gen 1 B58
-
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB B58 Factory Control EWG Top Mount Single Turbo kit
$6,614.99 – $9,980.99Price range: $6,614.99 through $9,980.99VTT-FAB is proud to offer the premiere top-mount single turbo kit for the BMW G Series, and Toyota A91 6 port B58 platforms. This kit is 100% made in the USA at our Hayward, CA facility, and only uses top-of-the-line components. We start with 321 Stainless materials as well as Billet flanges to create a high-flowing, and long-lasting equal-length manifold. We couple this with our revolutionary factory-controlled external gate system using a Turbosmart 60mm Straight gate. This gives you COMPLETE control of an external wastegate with your factory ECU tune. This means no external boxes to control boost, no mac solenoids, and no vacuum/boost lines. Simply reuse your factory actuator on our adapter, and you have the best flowing, and easiest-to-control system on the market with a true boost range of 0 psi, to whatever your turbo of choice can make. We use NO Silicone connectors at all on this kit. Two VTT-FAB HD clamps ensure you will never have to worry about blown boost hgoses etc.If your kit choice shows out of stock, please inquire about the current build time on kits - Sales@vargasturbo.com
NOTE: EVERY VTT-FAB SINGLE TURBO KIT IS BUILT TO ORDER, AND CANNOT BE CANCELLED ONCE MADE, PLEASE ORDER CAREFULLY.
PLEASE NOTE: GARRETT TURBOCHARGER OPTIONS DO NOT COME WITH WATER COOLING LINES. THEY ARE OIL-COOLED ONLY WHICH IS 100% FINE FOR STREET AND DRAG DUTIES. IF YOU PLAN TO ROAD RACE THE CAR WE SUGGEST ADDING WATER LINES
WE HIGHLY, HIGHLY SUGGEST RUNNING OUR ONE-WAY BREATHER WHEN ADDING A SINGLE TURBO KIT, AS YOU DELETE MOST OF THE PCV SYSTEM, FAILURE TO ADD THIS OR SOME SORT OF CRANKCASE VENTING LIKELY WILL RESULT IN CRANKCASE PRESSURE, AND POSSIBLY SMOKING. YOU CAN ADD ONE FROM THE DROP DOWNS
Features:- Fully Fabbed in-house in Hayward Ca using US-sourced parts
- Full 4" Downpipe for every kit (available in factory style termination or Race 4" single with optional turn down)
- All Tig Welded
- VTT-FAB 6 into BILLET COLLECTOR
- Fully set up for our VTT-FAB factory-controlled turbo smart straight gate. Making this plug-and-play with your existing tuner
- 321 Stainless Weld Els for the ultimate in heat resistance and durability
- 1.25" Primary for lightening spool, and high exhaust gas velocity
- NO external boost control is needed
- That AMAZING 6 into 1 turbo sound that divided housings just dont give you
- The charge pipe is flanged for a Turbosmart or Tial BOV
- NO Silicone connectors of any kind, twin VTT-FAB HD clamps secure the charge pipe
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT S55/N55 EWG Cast Aluminum Valve Cover
VTT is proud to introduce our S55/N55 EWG Cast Aluminum Valve Cover, designed for performance-driven BMW owners looking for a durable, stylish, and functional upgrade. This option provides a cost-effective alternative to our billet valve cover while still delivering enhanced engine bay aesthetics and eliminating the failure-prone factory plastic cover, which can crack over time.
Beyond durability, this valve cover removes the problematic factory PCV system, giving you complete control over how you set up your PCV. We highly recommend pairing it with a catch can for optimal performance. Additionally, this cover is perfect for single turbo conversions, offering increased clearance and improved heat resistance.
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT is proud to offer our Pre-Preg Hand Crafted CarbonĀ Fiber engine covers for the S58 engine. These are plug-and-play and snap into the factory mounting studs using the factory rubber mounts. BMW did a fabulous job on the latest engine offerings, but the overuse of plastics leaves the engine bays looking cheap, and unfinished. These carbon fiber engine covers, as well as our carbon fiber strut bars, are the perfect addition for anyone looking to give their engine bay, a polished, and sharp look. Available in Gloss, and Matte finish for the G8X and X3/4M platformsPLEASE NOTE: MUST REUSE FACTORY EMBLEM
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB Extension Harnesses
$49.99 – $104.99Price range: $49.99 through $104.99Need to move your coolant expansion tank to the other side of the vehicle for a single turbo kit you are building, extend Map sensor plugs, or IAT, how about Throttle Body? Don't cut your factory wires. Just get a VTT-FAB extension harness, and plug and play! These come in various lengths and are covered in expanded sheathing with heat shrink on both ends for a long-lasting, good-looking finish. Available:- Coolant Extension for late model BMW 2015+ 5 ft
- Pre-Throttle Map sensor extension harness 2 ft
- Pre-Throttle IAT Sensor extension harness 2 ft
- B58/S58/B48 etc Throttle body extension harness 2 ft
- B58 to S55 Throttle conversion/extension harness 2 ft
- EWG Actuator Extension harness, Various Lengths
- N54 stock MAP to N20 Map sensor extension
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT BMW Plug and Play Pre AND Post throttle 5-Bar (58 psi), 6-Bar(72 psi) Map Sensor Kits
$177.49 – $209.99Price range: $177.49 through $209.99Looking to up your boost limit on just about any BMW vehicle that runs a 3 or 4-wire BMW map sensor including but not limited to S58, B58, N54, N55, S55, S63, B48, B47, B42, B57, B46? We were too, so we decided to make a very easy plug-and-play kit for 3, and 4-wire BMW map sensors. These kits will allow you to completely replace the 3-wire sensor with one of our sensors, leave your stock 4-wire in place for IAT sensing, and move the power, ground, and sensor signal from the factory sensor to our sensor. These sensors have the proper scaling which will allow your tuner to simply change your map sensor scaling in the tune, and the factory ECU will be able to utilize the sensor voltage with no problem. We are offering these in 5 bar (58 psi), and 6 bar (72 psi), and each comes with a plug-and-play harness, and optional fittings for ease of installation.Note: For the S58/B58 our Factory style Pre-Throttle map sensor is also 5 bar, and will work fine coupled with the post throttle kit, but the scaling is different, if you want matching Voltages Pre/Post throttle you can run two of these.
A variety of install pics can be found below and - Here
Scaling PDF Links: 5-Bar / 6-Bar
Features include:- Plug and Play harnesses with no wire splicing
- Output wire for connecting a PI or external controller to your post-throttle map sensor for the most stable signal that is not affected by throttle closure
- Different fittings are available for your plumbing needs.
- Can have matching voltage signals for pre/post throttle for ease of tuning, and boost reference
- B58/S58 etc Pre Throttle - 3 Wire Harness (Charge pipe to 1/8" NPT adapter needed, for B58/S58 90 degree adapter needed to provide sensor clearance)
- B58/S58 Post Throttle - 4 Wire Harness (Boost reference will be needed from manifold to sensor)
- F90 M5 Pre/PostĀ Throttle - 4 Wire Harness (May need to repin) (Boost reference will be needed from manifold to sensor)
- Most all other platforms Pre/Post Throttle - 4 Wire Harness (May need to repin) (Boost reference will be needed from manifold to sensor)
- B58
- S58
- S63/ S63TU
- N63
- N54
- S55
- N55
- N20
- B46
- B48
- B57
- B47
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewPFS F8X S55-powered BMW Drop in Brushless System (DIBS) LPFP upgrade (800-1000WHP+ Capable)
$829.99 – $1,099.99Price range: $829.99 through $1,099.99PFS is proud to offer a true drop-in LPFP for S55-powered BMWs.Ā This LPFP needs NO additional pumps, wiring harnesses, controllers, etc.Ā Capability is 850whp on E85 and up to 1000whp on race fuel. We start with a factory bucket, we modify it to accept our high-flow brushless fuel pump. We then re-terminate the factory wiring to accept the new pump. No wiring splices, done the same way the factory does -the right way.Ā Every pump is fully tested on our flow bench to ensure proper function before shipping -you're going to be installing a product that has already proven itself. This pump is a true drop-in meaning you pull the factory unit out, install this pump, plug the factory plug into the hat, and you are done. The stock ECU controls the pump fully, and NO tune changes are required to take advantage of it.Ā Installation is easy for the DIY'er, and if you use a performance shop it'll be easy for them -just tell them to remove the old and replace it with new same as factory pump. -
Quick ViewVTT is proud to offer high-performance drop-in replacement filters for the 2019+ F9X X3/4M. These filters are custom-made for VTT. They are made with a heat-resistant silicone base, and a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. The factory filters have been proven to be restrictive, and you can improve power, and milage with this simple yet effective upgrade! Simply remove your engine cover, swap in the upgraded filters, and enjoy a better-flowing engine! We offer them in two colors. Red, and Black Features:
- 50 States Emissions Legal
- Easy to install in 15-30 minutes even for a novice
- Filters can be cleaned forever meaning never buy new filters
- Up to 13WHP gains
- Completely reversible if you ever want to remove
Fitment: 2019+ BMW
- F97 X3M
- G98 X4M
-
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT BMW B58/S58 Custom Carbon Head Gaskets
$1,043.99 – $1,610.99Price range: $1,043.99 through $1,610.99Looking for a head gasket for your BMW that will hold ALL of the boost? So were we, and nothing we tried worked. So we took matters into our own hands and had what we wanted made. These gaskets are made out of carbon material, and use stainless steel fire rings to ensure you are not pushing boost into your water jacket or between cylinders. There are two versions:- One does NOT require a groove to be cut into the block
- One DOES require a groove to be machined into the block to accept the fire ring.
- Custom made to our specs from Carbon material that will form your head/deck, and seal oil/water passages while fire rings, keep boost in the combustion chamber
- FULLY tested in-house on multiple builds to ensure boost level can be achieved
- They are NOT like the other fire ring gaskets on the marker (SCE/Athena) that do not require machine work, we had zero luck with those. THESE FLAT OUT WORK!
- Choose non-machined or machined version
- Different thicknesses are available as a custom order (4-8 week lead time)
- Different Bores Available as a custom order (4-8 week lead time)
For any gaskets NOT in stock expect a 4-8 week lead time as these are custom-made for us. This includes ANY gasket we currently do not have in stock.
-
Quick ViewLooking to fix the diff bolt issue on your G0X X3/X4, G3X 5 Series, and G1X 7 Series chassis? VTT is proud to offer our Rear diff bushing insert kit. This is pressed into the factory bushing and fills the voids in the bushing. This keeps the stock bushing ride compliance but removes any unwanted movement. These are sold as a kit and are available in the rear side only. Kit includes:
- One Billet Bushing insert
- Two 46mm Hardened Steel Washers
- One 12.9 M14 Bolt
- One M14 Lock nut
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsDont be fooled by non-vented- 4-piston caliper front drag brake kits for the G8X. That is all they are good for, one use, Drag racing. If you want a brake kit that matches what your G8X is and is as comfortable doing repeated stops on the street, highway, etc look no further! VTT G8X Lightweight front brake kit drops almost 60 lbs off the front of your G8X, all while using 13" vented rotors, and 6 piston calipers. These brakes will give the factory setup a run for its money in stopping power, and allow you to run the front wheels you need for the traction!Ā This kit will allow you to run the wheel/tire combo you need to drop your ETs all while putting the car on a significant diet over the stock front brake setup. The kit is a true plug-and-play kit using Genuine VTT parts, coupled with DOT-approved brake lines, CNC 7075 rotor hats/brackets Install Guide - Here Fitment Guide:- G8X All
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT G8X BMW Ultimate Lightweight Rear RACE Brake Kit (No Parking Brake)
$1,789.99 – $1,999.99Price range: $1,789.99 through $1,999.99 -
Quick ViewLooking for a way to do burnouts in your ATC13-2 Equipped Xdrive BMW that doesn't have an RWD mode such as G-Series non-M vehicles, and SUVs? We were too! VTT is proud to offer the ONLY easy-to-install, plug, and-play Xdriove controller on the market. This device will allow you to turn off, and turn on again your X-drive capability from the driver seat with a remote. While other options do exist such as X-Delete, or an in-dash gauge, one is a very slow process and is not viable to use as a way to do a burnout at the drag strip, and the other is a very expensive, AND very intrusive device that requires removal of most of the dash, and installing a gauge. Our solution takes 30 seconds to install once you gain access to the underside of the vehicle, and can be removed just as easily. Once installed, you can remotely disable your Xdrive from the driver's seat to perform your burnout, and then quickly enable it again to perform your launch with AWD active. This action does NOT require a key cycle, as soon as you activate it again the car will dismiss any lights and codes generated. This truly is the best of both worlds for ease of use, practicality, and effectiveness, all while coming at a very affordable price. This device uses a BMW plug on one end, and our custom-printed male plug on the other, for a plug, and play OEM fit. NO cutting any wires!
PLEASE NOTE: WHEN ACTIVATED YOUR DASH WILL LIGHT UP WITH CODES BECAUSE YOU ARE IN ESSENCE DISCONNECTING THE TRANSFER CASE. YOU MAY ALSO EXPERIENCE SPORT STEERING DURING THIS TIME WHICH MEANS A HARDER-TO-TURN WHEEL. THIS IS ALL NORMAL. WE ONLY SUGGEST USING THE DEVICE FOR SHORT PERIODS OF TIME, SUCH A BURNOUT AT THE STAGING AREA OF A DRAG RACE. IN SOME INSTANCES, THE CAR WILL NOT ALLOW A BURNOUT IF THE BRAKE, AND THROTTLE ARE APPLIED AT THE SAME TIME DUE TO ECU LOGIC, IN THESE INSTANCES INSTALLING OUR WIRELESS LINE LOCK ELIMINATES THIS ISSUE. MANY TIMES AN AFTERMARKET TUNE WILL ALSO ELIMINATE THIS ISSUE.
THIS DEVICE CAN BE USED FOR THINGS SUCH AS DRIFTING DONUTS ETC., BUT WE DO NOT CONDONE ANY DRIVING OUTSIDE OF LEGAL GUIDELINES. PLEASE USE THIS PRODUCT RESPONSIBLY. SEE ABOVE FOR WHAT IS GOING TO HAPPEN WHEN YOU ENGAGE THIS DEVICE
Install/User Guide is here - Install Guide
Features:- Works on any vehicle outlined below from stock to tuned
- 30-second install
- 30-second removal
- NON-intrusive ZERO cutting of wires, or taking anything apart on the vehicle TRULY plug and play
- OEM fit and finish on the plugs
-
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB S58 Factory Control EWG Top Mount Single Turbo kit
$6,614.99 – $10,772.99Price range: $6,614.99 through $10,772.99VTT-FAB is proud to offer the premiere top-mount single turbo kit for the G8X S58 platform. This kit is 100% made in the USA at our Hayward, CA facility, and only uses top-of-the-line components. We start with 321 Stainless materials as well as Billet flanges to create a high flowing, and long-lasting manifold. We couple this with our revolutionary factory-controlled external gate system using a Turbosmart 60mm Straight gate. This gives you COMPLETE control of an external wastegate with your factory ECU tune. This means no external boxes to control boost, no mac solenoids, and no vacuum/boost lines. Simply reuse your factory actuator on our adapter, and you have the best flowing, and easiest-to-control system on the market with a true boost range of 0 psi, to whatever your turbo of choice can make.Please inquire about the current build time on kits - Sales@vargasturbo.com
NOTE: EVERY VTT-FAB SINGLE TURBO KIT IS BUILT TO ORDER, AND CANNOT BE CANCELLED ONCE MADE, PLEASE ORDER CAREFULLY.
PLEASE NOTE: GARRETT TURBOCHARGER OPTIONS DO NOT COME WITH WATER COOLING LINES. THEY ARE OIL-COOLED ONLY WHICH IS 100% FINE FOR STREET AND DRAG DUTIES. IF YOU PLAN TO ROAD RACE THE CAR WE SUGGEST ADDING WATER LINES
WE HIGHLY, HIGHLY SUGGEST RUNNING OUR ONE-WAY BREATHER WHEN ADDING A SINGLE TURBO KIT, AS YOU DELETE MOST OF THE PCV SYSTEM, FAILURE TO ADD THIS OR SOME SORT OF CRANKCASE VENTING LIKELY WILL RESULT IN CRANKCASE PRESSURE, AND POSSIBLY SMOKING. YOU CAN ADD ONE FROM THE DROP DOWNS
Features:- Fully Fabbed in-house in Hayward Ca using US-sourced parts
- Full 4" Downpipe for every kit (available in factory style termination or Race 4" single with optional turn down)
- All Tig Welded
- VTT-FAB 6 into BILLET COLLECTOR
- Fully set up for our VTT-FAB factory-controlled turbo smart straight gate. Making this plug-and-play with your existing tuner
- 321 Stainless Weld Els for the ultimate in heat resistance and durability
- 1.25" Primary for lightening spool, and high exhaust gas velocity
- NO external boost control is needed
- That AMAZING 6 into 1 turbo sound that divided housings just dont give you
- The charge pipe is flanged for a Turbosmart or Tial BOV
-
Sale!Quick View
VTT Ultimate G8X Lock down Bundle
From:$872.48Original price was: $872.48.$828.86Current price is: $828.86. -
Sale!Quick View
VTT A9X Supra / G42 2 Series / G2X Lock down Bundle
From:$714.97Original price was: $714.97.$679.23Current price is: $679.23. -
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT Billet DUAL POINT G8X Diff Lockdown Kit
Serious traction starts here.
VTT is proud to introduce the Billet DUAL POINT G8X Diff Lockdown Kitāa must-have upgrade for high-performance G80 owners. The factory differential bushings are notoriously soft, allowing excessive diff movement that robs you of traction and stability.
As the G8X platform continues to push performance boundaries, the OEM components reveal their weaknesses. One major flaw? Significant differential deflection under hard launches, often resulting in broken rear bushingsāa growing issue in the community.
š” Our solution:
What BMW should have done from the startāa true DUAL-POINT Lockdown System that secures the differential at four key locations:-
Precision CNC-machined billet pucks at the lower differential mounts
-
Matching billet pucks at both secondary subframe points
This setup locks the diff down completely, eliminating unwanted movement and dramatically improving stability under launch and aggressive driving.
š ļø Easy Installation:
No subframe or diff removal required! Just drop the exhaust and heat shielding for access. A straightforward, no-hassle install.ā ļø PLEASE NOTE:
NVH Disclaimer:
All products designed to stiffen or reduce drivetrain movement inherently have the potential to increase NVHāNoise, Vibration, and Harshness. While these bushing inserts typically add minimal NVH, results may vary depending on your vehicle and personal sensitivity. This product was specifically engineered to minimize drivetrain movement. Returns due to NVH will not be accepted once the product has been installed.Exhaust Clearance Notice:
This product may require exhaust system modifications. Depending on your exhaust brand, fitment, and layout, adjustments may range from minor to significant.-
VTT is not responsible for any necessary exhaust modifications.
-
Vehicles using the stock G8X exhaust will almost certainly require modification.
Returns due to exhaust clearance issues will not be accepted once installed.
-
-
Quick ViewWant to tighten up the diff on your A9X Supra, G42 2 series, or G2X BMW and help eliminate any extra diff movement on hard launches or cornering? We got you covered with our Billet diff inserts. They are machined from 6061-T6, and anodized black for a long-lasting finish. They install easily by removing the diff bolts one at a time, lowering the diff slightly, inserting the bushing, and installing new washers, and bolts. Kit includes:
- 2 Front inserts
- 2 Rear inserts
- 2 Hardened 46mm washers
- 2 110mm M12x1.5 Bolts
-
Quick View
VTT S65 Billet Spark Plug Tubes
$147.49Tired of oil leaks from your plastic OEM S65 spark plug tubes? So were we, so we did something about it! VTT Anaodized billet 6061 Aluminum S65 spark plug tubes. We took the OEM tubes and redesigned them. Then machined them out of billet 6061, anodized them in black, and added a US-made Viton O-ring with more surface area to ensure a leak-free connection for the life of your S65 that will not break down over time. These are the perfect to upgrade when doing a VC replacement, or upgrading to VTT Billet S65 VCs! These are available in sets of 8. Kit includes:- 8 S65 Billet Spark Plug Tubes
-
Quick ViewWant to tighten up the diff on your 2021+ G8X M3/M4, A9X Supra, G42 2 Series, or G2X BMW and help eliminate any extra diff movement on hard launches? We got you covered with our Rear Billet diff insert kit. This is pressed into the factory bushing and fills the voids in the bushing. This keeps the stock bushing ride compliance but removes any unwanted movement. These are sold as a kit. To install remove the rear diff bushing, use the stock bolt in press the bushing in, and then replace it with the new bolt washer, and lock nut! Kit includes:
- One Billet Bushing insert
- Two 46mm Hardened Steel Washers
- One 12.9 M14 Bolt
- One M14 Lock nut
THIS KIT MAY REQUIRE LOWERING OF THE SUBFRAME TO GET THE STOCK BOLT OUT, AND THE NEW ONEĀ IN
Please note: A slight increase in NVH may be noticed from this product as it stiffens up the rear end, and removes some of the sound dampening of the rubber bushingsDOES NOT INCLUDE DIFF BUSHING IN PHOTO!
-
Quick ViewAlready have the VTT X3/4M rear diff bushing kit, and want to add the front side. This will allow you to buy it separately.Ā Adding in the front side increases installation time, and difficulty as the diff will need to be dropped, and a tool will need to be used to press in the front side bushing Kit includes:
- Front side bushing which will work in conjunction with the rear side to fully lock down the bushing. (Requires the diff to be lowered, and the insert pressed into the front)
-
Quick ViewHeat is the enemy of power, and the last thing you want is hot coolant heating your charge air even further right before it enters the charge cooler, but this is what BMW has done on the S58. This is done for emissions and quick warm-up purposes. However, If you are looking to make power on the S58, and are upgrading your charge cooler, or adding PI. While you are there, it takes 30 seconds to remove the coolant lines from the TB connections and replace them with our billet coolant delete kit. This completely removes the coolant from the Throttle body and provides a bypass for the coolant. Simply remove the two lines going to the throttle body, and run our hose in their place. You leave the coolant fittings on the TB open and avoid any unwanted heat being introduced into your charge tract. In our opinion a must for full effort builds. We take the work out of it for you. Kit included:
- One Plug and Play TB Coolant Delete Hose
- Billet 6061 Anodized coolant fittings for long leak-free life
- Reinforced 7-ply silicone hose for strength and longevity
- Vibration-resistant crimp clamps
- 100% plug and play, NO cutting or removing factory clamps or hoses. Fully reversible
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAre you looking to make your F9X X3/4M SUV BMW faster in the 1/4 mile or 1/2 mile racing? Want to run 17" wheels in the front? Want to drop close to 75 lbs of unsprung weight off the front of your F9X X3/4M at the same time? Do not want to break the bank while doing so? Look no further than the VTT F9X Series BMW Ultimate Lightweight Front Brake Kit! This kit will allow you to run the wheel/tire combo you need to drop your ETs all while putting the car on a significant diet over the stock front brake setup. The kit is a true plug-and-play kit using Genuine Wilwood parts, coupled with DOT-approved brake lines, CNC 7075 rotor hats/brackets, and a CEL eliminator harness for the brake sensor. Fitment Guide:- F9X X3/4M ALL
-
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT “DCS” EWG System for TurboSmart Straight Gates
$755.99 – $1,421.99Price range: $755.99 through $1,421.99VTT is proud to offer our EWG "Direct Control System" or DCS! This is a completely new innovation for people looking to control the highest-flowing wastegate on the market using an existing BMW electronic actuator. This system will allow BMW owners who have a vehicle with Electronic Wastegates from the factory to utilize this system to control an externally wastegated turbo system, AND it will ALSO allow ANY vehicle to use this setup to control your own custom turbo system. This is done by utilizing our custom 7075 Billet aluminum bracket coupled with a Turbosmart Straight gate, and if needed an EWG controller made for us by DCCD Pro. This allows direct external wastegate control over any turbocharger system with or without EWG for the factory. Features:- Utilizes the most current wastegate technology the Turbosmart Straight Gate. This gate allows maximum flow with minimal restriction, low drive pressure, and much more. Full details can be found here - https://www.turbosmart.com/product/electronic-straightgate-esg50-external-wastegate/
- Can be configured in multiple ways, and angles based on how you mount the adapter
- The adapter is 7075 Aluminum which has the strength of steel and weight of aluminum
- All connection fittings, are made from Nitronic 60 which has extremely high temperature and wear properties
- Zero Drive Pressure, no springs, no poppet valves, direct control over the gate using factory ECU logic
- Adaptable to ANY turbo system on any car to provide the ultimate in boost control!
-
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB S55 Factory Control EWG Top Mount Single Turbo kit
$4,913.99 – $7,550.99Price range: $4,913.99 through $7,550.99VTT-FAB is proud to offer the premiere top-mount single turbo kit for the F8X S55 platform. This kit is 100% made in the USA at our Hayward, CA facility, and only uses top-of-the-line components. We start with 321 Stainless materials as well as Billet flanges to create a high flowing, and long-lasting manifold. We couple this with our revolutionary factory-controlled external gate system using a Turbosmart 60mm Straight gate. This gives you COMPLETE control of an external wastegate with your factory ECU tune. This means no external boxes to control boost, no mac solenoids, and no vacuum/boost lines. Simply reuse your factory actuator on our adapter, and you have the best flowing, and easiest-to-control system on the market with a true boost range of 0 psi, to whatever your turbo of choice can make.We are currently taking orders for kits with a 6-8 week build time, NOT including coating time if chosen
Features:- Fully Fabbed in-house in Hayward Ca using US-sourced parts
- The ONLY top mount kit on the market that clears the factory strut bar
- All Tig Welded
- VTT-FAB 6 into Cast Collector
- Fully set up for our VTT-FAB factory-controlled turbo smart straight gate. Making this plug-and-play with your existing tuner
- 321 Stainless Weld Els for the ultimate in heat resistance and durability
- 1.25" Primary for lightening spool, and high exhaust gas velocity
- NO external boost control needed
- That AMAZING 6 into 1 turbo sound that divided housings just dont give you
- The charge pipe is flanged for a Turbosmart or Tial BOV
- Single charge pipe available for Wagner single inlet charge cooler
-
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB S55 Factory Control EWG Top Mount Single Turbo Manifold
$2,049.99Original price was: $2,049.99.$1,844.99Current price is: $1,844.99.Are you looking to fab up your own S55 Single kit, but want our game-changing factory control via Turbosmart Straight gate? Yep, we offer that. This manifold is fully fabricated in-house using 321 1.25" Sch 10 Weld els, our own wire cut flange, and cast 6 into 1 Collector. We also fab the Turbosmart straight gate port which will provide perfect fitment for our factory-controlled setup. this manifold is designed to work with T3 V-Band inlets such as Garret G25, G30, G35, PTE T3 Size V-band inlet turbos, and Turbosmart T3 V-Band inlet turbos. This kit will require the use of our VTT-FAB Factory controlled External Straight gate set up, which can be purchased separately, and can be added from the drop-down. Features:- Fully Fabbed in-house in Hayward Ca using US-sourced parts
- All Tig Welded
- 6 into Cast Collector that fits most T3 Small Frame Style V-band flanges (choose turbo chose from the drop-down)
- Fully set up for our VTT-FAB factory-controlled turbo smart straight gate. Making this plug-and-play with your existing tuner
- 321 Stainless Weld Els for the ultimate in heat resistance and durability
- 1.25" Primary for lightening spool, and high exhaust gas velocity
- Works with VTT-FAB Fitting adapters
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT S65 E9X M3 Billet/Silicone Coolant Hose Upgrade
$74.99 – $524.99Price range: $74.99 through $524.99VTT is proud to announce our S65 Billet/Silicone coolant hose upgrade kit! This is the ONLY complete kit on the market that replaces not only the hoses but ALSO the brittle factory plastic coolant connectors that are prone to breaking over time. We wanted to provide an upgrade to both areas. What we came up with is Billet 6061-T6 connectors anodized black for corrosion resistance, and 6-ply silicone molded silicone hoses in the factory shapes. These hoses are direct plug, and play, and require no changes. Upgrade your cooling and your engine bay at the same time! Fitment is as follows:- All S65 Models
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT- S55 / N55 PCV Delete kit
$99.99 – $399.99Price range: $99.99 through $399.99Have a problematic PCV on your S55/N55 powered BMW, don't want to pay to replace the entire VC? The VTT PCV delete kit is just what you need. This kit blocks the factory PCV from pulling from the head ports, gets rid of the tear-prone rubber diaphragm, and essentially converts your VC into VTA through the factory front port on the VC. This kit can work stand-alone with the cap, and a -10 ORB plug, can be used to run an extra breather port, or it can be installed with any Catch Can kit that uses the front port of the stock VC. Simply remove the factory cap, take out the diaphragm, screw the plug into the center port, and tap the new cap on with a soft blow hammer or similar. This deletes the PCV and allows you to avoid the issues of a failed diaphragm. Kit Choices- Cap and -10ORBĀ plug only (to be used with an existing catch can or VTA)
- Cap and Catch can kit (recirc or VTA) Complete kit to delete the PCV, and run a catch can (Currently works with S55 only)
- Cap Only (To be used if routing an additional hose from the cap to location or set up of choice, requires your parts to work)
- 1 PCV Cap
- 1 PCV port block off Plug
- 1 -10 ORB Plug
- Optional Catch Can kit
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / Details-
Introducing the VTT OBD-LOCKĀ ā Enhanced Security & Improved Design!
We are excited to announce our OBD-LOCK! This latest version has been completely redesigned for improved strength, ease of installation, and enhanced protection. Key upgrades include:
ā No more OBD port penetration ā eliminates any risk of damage
ā Revised thread style ā prevents stripping for a secure fit
ā Stronger, more durable design ā ensures maximum securityUltimate OBD Port Protection
The VTT OBD-LOCK is precision-machined from billet 6061-T6 aluminum and is engineered to completely lock out your OBD port, preventing unauthorized access.
š Anti-Theft Protection ā Prevents thieves from accessing the OBD port to duplicate keys or disable security systems
š Dealer/Tech Lockout ā Stops unauthorized tune changes or system modifications
š Tamper-Proof Design ā Cannot be removed without physically destroying the OBD port unless the correct tool is usedVTT OBD-LOCK ā Version 2 NON-GM
Universal Fit for All Non-GM (General Motors) VehiclesThis device is compatible with all non-GM vehicles, including but not limited to:
-
All VAG group vehicles (VW, Audi, Bentley, etc.) ā including recessed port VW/Audi models
-
Ford, Nissan, Honda, Toyota, Porsche, Dodge, Ram, Jeep, Kia, Subaru, and more
Not compatible with GM (General Motors) vehicles.
VTT OBD-LOCK ā Version 2 GM
Universal Fit for GM (General Motors) Vehicles ONLYThis version is specifically designed for General Motors vehicles, including GM, Chevrolet, Cadillac, Holden, and other GM-branded models.
If your vehicle is anything other than a General Motors product, you will need the Non-GM version.
-
-
-
Quick ViewLooking to replace your damaged factory BMW Actuator part number - 11658691853 VTT has located and ordered in bulk these actuators, and offer them at a discounted price. These are 100% FACTORY BMW OEM actuators, not aftermarket. Fitment is for the following, but they work to replace basically any BMW Actuator.
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsWhile BMW did a beautiful job on the F9X X3/4M's they sure decided to get cheap out on the strut bars. Ugly steel bars with no real pop or aesthetically pleasing qualities seem like an afterthought to such a well-thought-out car. Well, here at VTT we decided to do something about it, and immediately took our bars off, and let our engineers go to work on a solution. What they came up with is beautiful, and functional. 100% CNc machined from 6061-T6 aluminum and anodized in a variety of colors The result adds a gorgeous look to your X3/4M engine bay, and what BMW should have done from the factory. Pair these with our beautiful center strut bar for the complete set-up! -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB Billet Extended Turbo Drain Adapters
$41.99 – $59.99Price range: $41.99 through $59.99Looking for a high-quality extended turbo drain in a straight or 45-degree angle for Garrett GT, GTX, G series, and T3/T4 (precision, etc). We got you covered with these high-quality billet drain adapters. Flanges available:- VTT-FAB-062 T3/T4 square opening, Garrett GT/GTX40+/G40+ 3.5" neck, All precision -10AN Male
- VTT-FAB-063 Garrett GT/GTX25-35/G25-G35 3.5" neck -10AN Male
- VTT-FAB-064 Garrett GT/GTX25-35/G25-G35 4" neck -3/4" hose barb
- VTT-FAB-081 T3/T4 square opening, Garrett GT/GTX40+/G40+ 2.5" 45-degree neck, All precision -10AN Male
- VTT-FAB-082Ā T3/T4 square opening, Garrett GT/GTX40+/G40+ 2.5" 45-degree neck, All precision 3/4" Hose Barb
- VTT-FAB-083 T3/T4 square opening, Garrett GT/GTX40+/G40+ 1" neck, All precision -10AN Male
- VTT-FAB-084 Garrett GT/GTX25-35/G25-G35 2.5" 45-degree neck -10AN Male
- VTT-FAB-085 Garrett GT/GTX25-35/G25-G35 2.5" 45-degree neck -3/4" hose barb
- VTT-FAB-086 Garrett GT/GTX25-35/G25-G35 1" neck -10AN Male
-
Sale!Quick View
VTT F9X X3/4M COMPLETE lock down bundle
From:$557.47Original price was: $557.47.$529.60Current price is: $529.60.Get the COMPLETE lockdown kit for your X3/4M at one low price. Order all 4 pieces together, and save 5%! Transfer Case Bushing are optional -
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT noticed a hole in the F9X X3/4M market for a high-quality, lightweight, NVH-friendly, and easy-to-install Diff Lock Down kit to improve diff stability under launching, and hard cornering. So we did something about it and went to work on a very innovative design that 100% positively locks the diff down from movement, while shielding it from adding a ton of NVH, and can be used with the stock diff, and subframe bushings. This design uses existing mounting points on the vehicle, you do NOT have to remove the subframe or the Diff to install. Simply remove 4 diff bolts, drill two holes in the subframe slightly bigger, install two M8 riv-nuts, and install the lockdown, you do not even have to move the exhaust. A typical install can be 30-45 minutes for someone who is experienced working on vehicles, an hour or two if you like taking it slow. You WILL need a Riv-nut tool to install the Riv-nuts, we provide a link below for what we recommend on Amazon. Features:- Lightweight 1.5 lbs for the entire lockdown plate
- Uses FOUR connection points on the Diff, and three on the subframe for the ultimate in positive diff location, this will stop all diff movement on launch, saving your guibos, etc
- 100% Billet construction from 6061-T6 aluminum
- Anodized in 3 colors for corrosion resistance, a long-lasting finish, and good looks
- The subframe does NOT have to be removed for installation
- Uses all 12.9 grade hardware
- Does not add excessive NVH
- Positively locks down the diff to eliminate all unwanted movement under launches, acceleration, cornering, etc.
-
Quick ViewLooking to fix the diff bolt issue on your F9X X3/4M? VTT has taken a 3 pronged approach by offering a triple solution, one part of the solution is the Rear diff bushing insert kit. This is pressed into the factory bushing and fills the voids in the bushing. This keeps the stock bushing ride compliance but removes any unwanted movement. These are sold as a kit and are available in rear side only, and front and rear sides both. Adding in the front side increases installation time, and difficulty as the diff will need to be dropped, and a tool will need to be used to press in the front side bushing Kit includes:
- One Billet Bushing insert
- Two 46mm Hardened Steel Washers
- One 12.9 M14 Bolt
- One M14 Lock nut
- Optional front side bushing which will fully lock down the bushing. (requires the diff to be lowered, and the bushing pressed into the front)
-
Quick ViewLooking to fix the diff bolt issue on your F9X X3/4M? VTT has taken a 3 pronged approach by offering a triple solution, one part of the solution is the front diff bushing inserts. These are pressed into the factory bushing, and fill the voids in the bushing. This keeps the stock bushing ride compliance but removes any unwanted movement. These are sold as a set Kit includes:
- Two Billet Bushing inserts
- Two 46mm Hardened Steel Washers
-
Quick ViewAre you building a single kit for the N54, N55, or S55 platform?Ā M7 Locking exhaust nuts is not easy. So we made our own to combat the issue. These are the perfect solution to the problem of hard-to-find M7 lock nuts. Sold individually so order the number you need.
Note:Ā This is nuts ONLY Stud not included, by our extended M7 studs here - https://vargasturbo.com/product/vtt-fab-extended-m7-n54-n55-s55-b58-2-port-head-studs/
-
Quick ViewAre you building a single kit for the N54, N55, or S55 platform? The stock studs are usually a little bit short for most single-head flanges, and finding M7 studs is not easy. So we made our own longer studs to combat the issue. Made from 10.9 grade steel, and coated in black oxide, these are the perfect solution to the short stud problem. Sold individually so order the number you need. Stud details are as follows
- Overall length 47mm (stock 39mm)
- 3mm shoulder
- 6mm head which is 5mm hex
- 14mm short end
- 24mm long end (stock 15mm)
Dont forget our M7 copper lock nuts as well to complete the job - https://vargasturbo.com/product/vtt-fab-m7-copper-locking-exhaust-nuts/
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT is proud to offer our billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap, and the need for a special tool for removal, while adding some pop, and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. We also designed these caps to complement our Power Steering reservoirs We offer these caps in 5 colors - Red, Black, Blue, Gold, and Clear anodized The cap retains the factory hex for easy installation, and removal, and includes a new sealing O-ring Fitment includes All S65 models -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT BMW TITANIUM 5×112 to 5×114 Bolt Pattern Conversion Kits
$199.99 – $389.99Price range: $199.99 through $389.99Looking to convert your 5x112 M14x1.25 BMW vehicle to 5x114 to open up your wheel options? Want to drop 60% of the weight off steel options? We got covered with our VTT TITANIUM wheel stud conversion kits. These kits are Grade 5 Titanium studs, rated at more than 135,000PSI Tensile Strength, with Grade 5 Titanium nuts with a 60-degree cone seat to fit most all aftermarket wheel applications and convert your vehicle to M12x1.5 wheel studs which allow you to fit 5x114 wheels with no other changes.PLEASE NOTE ā THESE STUDS WILL ONLY WORK IF YOUR WHEELS ARE DRILLED M14 THESE WILL NOT WORK FOR WHEELS DRILLED M12!
DO NOT USE ANY HUB-CENTERING SLEEVES WITH THESE CONVERSION STUDS, THE LUGS WILL CENTER THE WHEELS. THE USE OF A CENTERING SLEEVE MAY LEAD TO STUDS BREAKING. FOR INSTALLATION YOU MUST SNUG EACH LUB UP SLOWLY, AND IN A STAR PATTERN TO GET THE WHEEL CENTERED ON THE LUGS, FAILURE TO DO SO CAN ALSO LEAD TO FAILURE.
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB Billet Oil/Coolant Fittings, and block offs
$21.99 – $41.99Price range: $21.99 through $41.99VTT Universal Turbo Fittings ā Oil & Coolant Solutions for BMW Turbo Builds!
Looking to fabricate your own turbo kit for BMW platforms? Need an easy solution to block off water lines or create custom feed and drain fittings? Look no further! VTT offers a wide range of high-quality oil and coolant fittings to simplify your build. Our fittings are designed for most late-model BMW platforms, providing a plug-and-play solution for custom turbo setups. š Available Fitting Options: š¹ Oil Feed ā -4 AN Male š¹ Oil Drain ā -10 AN Male š¹ Coolant Fittings ā Barbed Male or Block-Off Options -
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStop the Flex. Launch with Confidence.
Soft bushings are the enemy of hard launches and drivetrain longevity. The factory BMW transfer case bushingsāespecially on the G8X and F9X platformsāare notoriously soft. Thatās the last thing you want when youāre putting serious power down.
Sure, you could replace the entire bushing with a solid one, but that often requires lowering or removing the transfer caseānot to mention the added NVH (noise, vibration, and harshness) that comes with it.
Our transfer case bushing inserts offer a smarter solution: reduce bushing flex without sacrificing comfort. You keep smooth, quiet drivability around town and at idleābut when itās time to launch, the transfer case stays planted.
Fitment Notice ā Two Versions Available:
BMW uses two different transfer case bushing types. We now offer Version A and Version B inserts to match.
ā ļø You must physically inspect your vehicleās bushing to determine which version you need.
We are not responsible for incorrect orders if this step is skipped. -
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT is proud to offer our Billet Aluminum ZF8HP Transmission Pan ā the ultimate upgrade over the factory plastic or cast aluminum pans.
CNC-machined from 6061-T6 aluminum and anodized in multiple colors, this pan adds durability, serviceability, and performance benefits. With 2 extra quarts of fluid capacity, built-in cooling features, and premium sealing, itās designed for both daily drivers and high-performance builds.
Key Features
-
6061-T6 Billet Construction ā Stronger, longer-lasting, and precision-machined.
-
Increased Fluid Capacity ā 5.7 QTs (5450ML) vs. the stock 3.7 QTs (3500ML).
-
Improved Cooling ā Machined external fins aid heat dissipation.
-
Integrated Magnet ā Rare-earth magnet supports the filter while pulling metal debris from the fluid.
-
Premium Seal ā Reusable US-made Viton gasket for a leak-free seal.
-
Easy Service ā -6 ORB magnetic drain plug for quick, clean fluid changes.
-
Anodized Finish ā Corrosion-resistant and available in multiple colors.
-
-
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB Billet Velocity Stack
$35.69 – $45.89Price range: $35.69 through $45.89Running an open turbo, and want to straight out the airflow to the compressor for extra efficiency. Our billet velocity stack is what you need. Backed by physics a Bellmouth or velocity stack will help smooth the air coming into the turbocharger or on NA cars. These are made from 6061-T6, and anodized in a variety of colors and sizes. Currently, we offer 3", 4", and 5" These are suitable to fit any intake tubing or turbocharger inlet with that size. These are available with or without a silicone connector and clamps. Our V-Stacks are also made to extend down on the outside so you can attach a Vibrant S&B or other compatible 7" Filter on the 3"/4" version. Features:- Smooth air before it enters the turbocharger or Intake
- Very low profile, only sticking 2.5" above the turbocharger inlet. Even if you have no room for a filter these will fit
- Fits all turbochargers with a 3", 4" or 5" inlet including PTE Sportsman Cover!
- 3" and 4" version works with Vibrant #10961 7" filter or S&B 1032 FilterĀ if you have room
- 100% billet construction for high-strength
- Anodized for long life, and durability
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB Carbon Fiber Turbo Blanket
$69.99 – $104.99Price range: $69.99 through $104.99Looking to keep the underhood heat down on your single turbo car, or build? We got you covered with our VTT-FAB Carbon Fiber Turbo Blankets. The outer shell is made of Carbon Fiber, and the inner shell is Silica Fiber. For 2500F intermittent / 1800 direct heat rating. We have them in 2 sizes T3, and T4. See fitment below Kit included:- 1 Carbon Blanket of choice
- 2 install springs
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT/Ace Race 321 Stainless Weld Els
$11.99 – $19.99Price range: $11.99 through $19.99PLEASE NOTE: We keep most of these Els in stock, but if we do not, when you order we will order from Ace Race, and then we can pack all your VTT-FAB parts together for one shipment at one cost. This can slightly delay your order based on lead time from ACE Race. If ACE RACE shows the ELS in stock, and we do not have them in stock, we can usually get them in 1-2 days.
THE FABRICATOR'S CHOICE FOR HIGH HORSEPOWER TURBO MANIFOLD BUILDS!
The Ace Race Parts brand of Schedule 10 45Ā° Weld Els are available in 321 Stainless! OurĀ 321 Stainless Weld Els offer superior corrosion resistance in high-temperature applications ā especially applications that will see extended periods of wide open throttle (e.g.: a track car) or will see repeated high heat cycling (e.g.: a drag car that sees significant cooling between passes). With a slight addition of Titanium to stabilize the alloy at high temperatures,Ā 321 Stainless is an excellent choice for turbo manifolds that will be exposed to high levels of heat over a prolonged period of time.
FEATURES
- 321 Stainless Steel
- Allows for a Smooth, Unobstructed Flow of Exhaust Gas
- Durable Enough for a Wide Variety of Turbo Manifold Applications
- Capable of Withstanding 1,600Ā°F
- 37.5Ā° Beveled Ends
- Manufactured to ASTM A403/ASME B16.9 specifications
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewMac Solenoids
$31.99 – $64.99Price range: $31.99 through $64.99Looking for Mac solenoids for your build? We got em here at VTT-FAB so you can get everything in one place. We have 3-port, and 4-port in stock! -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB Cast Aluminum Short Radius Elbows
$15.99 – $17.99Price range: $15.99 through $17.99Perfect for welding onto compressor housings, or charge piping when you need a tight transition or don't have a lot of room. Available in 2", 2.5", and 3" -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT FAB Turbo/Downpipe Flanges
$21.99 – $64.99Price range: $21.99 through $64.99 -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB Billet Charge Pipe Weld Flanges
$21.99 – $53.99Price range: $21.99 through $53.99Looking for charge pipe weld flanges for your custom single turbo kit? We got you covered with some of the more popular flanges. Features:- Billet 6061 T6 aluminum
- Raw finish for easy welding
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB Turbocharger Inlet Flanges
$21.99 – $29.99Price range: $21.99 through $29.99Need an outlet inlet for your turbo? VTT-FAB has you covered with a variety of options! All are machined from 304SS for long life, and great weldability! Choose what you need from the drop down! -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB 304SS Turbo Collectors
$189.99 – $474.99Price range: $189.99 through $474.99VTT-FAB High-Flow Turbo Collectors
Looking for the highest-flowing collectors on the market to build your custom turbo kit? Donāt want to waste time fabricating your own? VTT-FAB has you covered with our precision Cast and Billet 304SS Turbo Collectors.
We offer multiple configurations and flange stylesājust choose your setup from the dropdown and start fabbing.
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT/ACE Race SEAMLESS PIPE 321 STAINLESS – 4 FOOT LENGTH
$59.99 – $97.49Price range: $59.99 through $97.49PLEASE NOTE: We keep most of these Tube Sections in stock, but if we do not, when you order we will order from Ace Race, and then we can pack all your VTT-FAB parts together for one shipment at one cost. This can slightly delay your order based on lead time from ACE Race. If ACE RACE shows the tube in stock, and we do not have them in stock, we can usually get them in 1-2 days.
THE FABRICATOR'S CHOICE FOR BUILDING TURBO MANIFOLDS & MERGE COLLECTORS!
The Ace Race Parts brand of Schedule 10 321 Stainless Pipe isĀ the perfect match for our Stainless Weld Els for fabricating turbo manifolds. OurĀ 321 Stainless Pipe offers superior corrosion resistance in high-temperature applications ā especially applications that will see extended periods of wide open throttle (e.g.: a track car) or will see repeated high heat cycling (e.g.: a drag car that sees significant cooling between passes). With a slight addition of Titanium to stabilize the alloy at high temperatures,Ā 321 Stainless is an excellent choice for turbo manifolds that will be exposed to high levels of heat over a prolonged period of time.
FEATURES
- 321Ā Stainless Steel
- Seamless Construction ā No Internal Weld Bead
- Allows for a Smooth, Unobstructed Flow of Exhaust Gas
- Durable Enough for a Wide Variety of Turbo Manifold Applications
- Capable of Withstanding 1,600Ā°FĀ
- Manufactured to the ASTM A312Ā specification
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNeed a Tee fitting for plumbing Vacuum, or Boost lines, Don't want to use cheap plastic ones that can get soft when hard, and brittle after they heat cycle? We didn't either, which is why we machined these high-quality billet tees to solve this issue. Machine from 6061-T6 aluminum, and anodized in black for a long-lasting corrosion-free finish, these tees look great, and will you never have to worry about one failing. We offer them in two sizes, each size has 12mm legs and 3 barbs:- 7.60mm / -4 Push Lock for people looking to use -4 push lock hose or -4 AN hose. This is a perfect fit for those.
- 1/4" For people looking to use 1/4" vacuum tube
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsThese are Billet 321 Stub transitions to make a perfect transition from B58/S58 Oval head ports to a 1.25" Sch-10 pipe. This saves you a step and valuable time when fabricating a manifold from scratch. Time is money! These fit our B58, and S58 Wire cut flanges for a perfect transition -
Quick ViewLooking to go above 45 psi in your BMW-powered vehicle? Looking for a plug-and-play solution? We have you covered with our BMW 5 bar sensor. These will allow 58 psi to be read and are factory plug, and play. Simply remove your old sensor, replace it with the 5 bar, and have your tuner rescale your map values in both your DME tune and your PI tune if applicable.
-
Quick ViewLooking to control a Garett G25-G35 turbocharger with a BMW EWG actuator, look no further. These billet 7075 Aluminum brackets allow direct fitment of the BMW EWG actuator to the Garrett housing, slotted to allow for almost unlimited adjustability. Features:
- Allows direct fit of BMW EWG to Garrett turbos with no fabrication
- 7075 Aluminum for the strength of steel, but lightweight attributes of aluminum
- Anodized for corrosion resistance, and long-lasting finish
-
Quick ViewNeed to move your coolant expansion tank to the other side of the vehicle for a single turbo kit you are building? Don't cut your factory wires. Just get a VTT-FAB extension harness, and plug and play! These are 5 feet long, and are covered in expanded sheathing with heat shrink on both ends for a long-lasting, good-looking finish. Fits MOST late model 2015+ BMW models ith a wide 2 pin plug on the coolant expansion tank
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT F8X M2C/3/4 BMW Ultimate Lightweight Rear Brake Kit
$1,609.99 – $1,949.99Price range: $1,609.99 through $1,949.99Are you looking to make your F8X Series BMW faster in the 1/4 mile or 1/2 mile racing? Want to run 17" wheels in the front? Want to drop 21 lbs of unsprung weight off the front of your F8X M2C/M3/M4 at the same time? Do not want to break the bank while doing so? Look no further than the VTT F8X Series BMW Ultimate Lightweight Front Brake Kit! This kit will allow you to run the wheel/tire combo you need to drop your ETs all while putting the car on a significant diet over the stock front brake setup. The kit is a true plug-and-play kit using Custom VTT parts, coupled with DOT-approved brake lines, CNC 7075 rotor hats/brackets, and a CEL eliminator harness for the brake sensor.This kit comes in 1 variation, with two different caliper options. We HIGHLY suggest 6-piston Calipers for street driving and 1/2-mile racing. These calipers will drop weight, AND be a braking upgrade over stock calipers. Requires trimming of dust shields to fit
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsWe have heard all the stories about fluid all over the engine bay, seen the headbands, socks, sweatbands, and all the fixes people have used and still have issues with their PS reservoir.Ā So we decided to do something about it, and started with a ground-up design that completely fixed all those issues, and added some much-needed features to an old BMW design. Kit Includes:- 1 PS Reservoir in choice of color
- 2 or 4 fittings
- 2 Hose clamps
- Optional One-Way Breather
Product categories
- 10% Max Discount
- 15% Max Discount
- BMW
- Diesel
- Ford
- Honda
- Hurricane I6
- Mercedes
- Mitsubishi
- N/S63TU
- No Discount Products
- Porsche
- Powersports
- Tier OBD
- Toyota
- Uncategorized
- Universal
- VTT
- VTT-FAB
- VTTEV
- VW/VAG