-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Billet N54 PCV Cover & Valve Upgrade
$14.99 – $63.99Price range: $14.99 through $63.99Upgraded PCV valve for your N54 engine. We always recommend upgrading your PCV valve at the time of turbo upgrade or replacement, as the stock valve can be worn. This means it can stop functioning to its full potential, causing oiling issues with your BMW. This upgraded valve not only replaces the worn stock valve, it is also much stronger and will help eliminate any future PCV issues.Kit Includes:
-
1x Billet PCV Valve Or 1x Billet PCV cover
- 1x complete kit with PCV Valve, and PCV cover (Save 15%)
-
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT BILLET BMW N54/N55/S55 Crank Seal Guard
$84.99 – $179.99Price range: $84.99 through $179.99VTT BILLET BMW N54/55 Crank Seal Guard.
It is a well-known issue on the BMW N54/N55/S55 platforms that your serpentine belt can fail for various reasons, when this happens you have a high chance of the belt getting sucked behind the front damper, and then being pushed past the crank seal into your oil pan. From there it can get sucked into the oil pick up causing total engine failure, even if you do not lose the engine it is a COSTLY repair to remove the sub-frame and drop the oil pan to remove the belt. The best way to combat this is to watch for oil leaks and keep up on your maintenance. BUT Even with those preventative measures, pre-mature belt failure can occur. This crank seal guard installs over your front crank seal and will keep the belt from being sucked in if a belt failure does occur. This is a cheap way to ensure you do not end up having to replace your motor from oil starvation due to an ingested belt. Our seal is different from those already on the market, firstly it is not offensively priced. Secondly, it is 100% billet, with no welds on the tabs to break, no cheap bent thin steel pieces. 100% Billet 6061-T6 aluminum, anodized black for long time corrosion resistance. Crank Seal comes with- One VTT Billet N54/55 Crank Seal Guard
- Two extended 12.9 Grade bolts, and two stainless washers
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Upgraded Silicone N54 coolant hose kit
$19.99 – $464.99Price range: $19.99 through $464.99VTT Upgraded Silicone N54 Coolant Hose Kit
Upgrade Your N54 Cooling System with High-Performance 6-Ply Silicone Hoses. NOW WITH TWO FITTING CHOICES! Billet or OEM Style
Looking to replace your worn-out N54 coolant hoses with a high-quality, durable upgrade? Want a cost-effective solution without opting for billet adapters? Vargas Turbo Technologies (VTT) has you covered!
We now offer our N54 upgraded silicone coolant hose kits featuring OEM-style direct-fit factory connectors, ensuring a seamless and reliable installation.
ā Key Benefits:
- Premium 6-Ply Silicone Construction ā Handles up to 200 PSI for superior durability.
- BILLET OR OEM-Style Factory Connectors ā Direct fit with no modifications required.
- Multiple Color Options ā Available in Red, Black, or Blue to match your engine bay aesthetic.
- All Hoses In Stock ā Choose your preferred fitting style and color at checkout.
-
Quick View
VTT S55 / N55 Crank Bolt Capture
$127.49The VTT S55 crank bolt capture. slips over the head of the crank bolt fully encapsulating it, and locks it to the crank hub, meaning it cannot back out no matter what. -
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT BMW Billet One Way Crankcase Breather VTT is happy to introduce the first and only available plug and play crankcase breather kits for ALL BMW applications that use the two-prong oil tab style oil fill caps. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, and remove crankcase pressure, all while adding a cool look to your engine bay. Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups for the ultimate in crankcase pressure relieve Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one-way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase.This breather will fit MOST NOT ALL BMWs with the two-prong style oil fill cap including but not limited to N54, N55, S55, S54, S85, S63, S63TU, N63. There are factors that may stop it from fitting your platform such as valve cover style etc.
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT VAG (VW/AUDI) 5×112 to 5×114.3/5×120 Conversion Wheel Spacers
$59.99 – $74.99Price range: $59.99 through $74.99Looking to convert your 5Ć112 M14x1.50 VAG vehicle to 5Ć114 OR 5x120 to open up your wheel options DRAMATICALLY? We got covered with our VTT wheel spacer conversion kits. These kits are machined from billet 6061-T6 aluminum and anodized for a long-lasting finish. We then press in 10.9 class studs, with corrosion-resistant zinc coating for years of use. The spacer then accepts either a 5x114 wheel or a 5x120 wheel. The 5x114 use M14 studs, and the 5x120 use M12 studs. All the spacers have a 57.1 bore size to fit 99% of VAG applications, and we offer Hub-Centric adapter rings to fit almost any wheel bore size. No wobble bolts or redrilling here. We offer these in 4 thicknesses 15mm, 17.5mm, 20mm, and 25mm. The studs coming out of the spacer areĀ 40ā³ total length and come with Black Lugnuts. Spacers that convert to 5x120 have M12 studs, ALL others have M14x1.5These are sold PER WHEEL. To do a full vehicle order FOUR
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / Details -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT N55/S55 “Spline Lock” Crank Hub Solution
$819.99 – $939.99Price range: $819.99 through $939.99VTT āSpline Lockā Crank Hub System ā N54 / N55 / S55
VTT is proud to offer theĀ only complete crank hub solutionĀ for BMW N54, N55, and S55 engines thatĀ does not require drilling the crankshaft for pins.
Our innovative hub features proprietaryĀ Spline Lock Technologyāa high-tolerance, precision-machined spline system that presses into the crank andĀ positively locks the hub in place, eliminating the need for traditional pinning or welding.
After months of rigorous development and over 10 different prototype revisions, our final production version was put to the test. In our in-house trials, the hub outperformed expectationsābreaking our testing rig before it ever slipped. Real-world validation has been conducted on the VTT N54 race car, which spins toĀ 8,000 RPMĀ and produces overĀ 900 WHP.
Key Benefits:
-
No crank drilling requiredĀ ā stock-like installation
-
Minimal laborĀ ā fully reversible with no permanent modification
-
Tested to extreme conditionsĀ ā race-proven at high RPM and power
-
Exclusively compatible with VTTās Crank Bolt Capture (CBC)Ā for maximum security
ā ļøĀ Spline Lock hubs are recommended be used with the VTT Crank Bolt Capture system. They are not intended to run independently.
-
-
Quick ViewThis kit comes with 1 set (both turbos) of Stainless Steel wear matched bushing, and flapper assembly, Wastegate arm, rod end, and Stainless steel 8mm C clip.
-
Quick View
VTT N54 Crank Bolt Capture
$127.49The VTT N54 crank bolt capture. slips over the head of the crank bolt fully encapsulating it, and locks it to the crank hub, meaning it cannot back out no matter what. -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Ignition Coil Kits
$169.99 – $222.49Price range: $169.99 through $222.49VTT is proud to offer ignition coil replacements for the N5X platforms, as well as B5X, and many VAG platforms. We started our quest for coils by contacting multiple coil manufacturing companies, paying for individual coils to be made then putting them through rigorous testing in the USA to ensure they matched or exceeded factory output. Once we were satisfied with the testing, we had the best performing coils made to our colors and specs. We offer these coils as complete sets for the N54, B58/S58, and the VAG platforms in either 4, or 5 cylinders. We also offer upgraded plugs which are highly recommended to change when doing coil replacements These coils come in 3 colors, Red, Black, and Blue, and are not simply an aesthetic upgrade but match or exceed the factory secondary spark energy. The VAG coil, is extremely potent, and the tester was so impressed with it compared to the factory coil, he called it a "BEAST" of a coilNote:Ā To extract maximum performance from VTT coils minor tune changes are required to optimize dwell periods. See recommended Dwell times below
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewN54 Aluminum Turbo Outlet
$242.49 -
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsA well-known issue with the N54 and early N55 with Hydraulic power steering is the plastic pulley either hitting the subframe, or simply breaking on its own, this can cause the belt to be ejected from the pulley, and leave you stranded with no serpentine belt. To top it off if you continue to run the vehicle with the belt off, you also have a good chance of sucking the belt into the engine through the front seal. Put an end to the dreaded plastic PS pulley issues with our 100% Billet Aluminum PS pulley. We make these from 6061-T6 aluminum and anodize them in one of 4 colors (Black, Red, Blue, and Clear) for a great look, and long-lasting finish. These weigh 11Oz, very close to the weight of a stock pulley, and are lighter than the cast aluminum versions on the market. -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick View
VTT BMW/Toyota Conversion Wheel Spacers
$59.99 – $74.99Price range: $59.99 through $74.99Looking to convert your 5Ć120 or 5x112 vehicle to 5x114.3 wheels, or 5x120 wheels, and open up your wheel options DRAMATICALLY? We got covered with our VTT wheel spacer conversion kits. These kits are machined from billet 6061-T6 aluminum and anodized for a long-lasting finish. We then press in 10.9 class studs, with corrosion-resistant zinc coating for years of use. The spacer then accepts either a 5x114 wheel or a 5x120 wheel. The 5x114 use M14 studs, and the 5x120 use M12 studs. All the spacers have either a 66.6mm or 72.6mm Hub bore size to fit 99% of BMW applications, and we offer Hub-Centric adapter rings to fit other wheel bore sizes No wobble bolts or redrilling here. We offer these in 4 thicknesses 15mm, 17.5mm, 20mm, and 25mm. The studs coming out of the spacer areĀ 40ā³ total length and come with Black Lugnuts. Spacers that convert to 5x120 have M12 studs, ALL others have M14x1.5 -
Quick View
N54 OEM Replacement Kit (Fits all N54 models LHD & RHD)
From:$1,379.98Original price was: $1,379.98.$1,379.97Current price is: $1,379.97.WHP Level supported (with proper fuel, upgrades, and tuning) Stock - 500WHP -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Cold Side Charge Pipe
$94.99 – $127.49Price range: $94.99 through $127.49Whenever upgrading your N54 we suggest going to a true BOV like a Turbosmart Raceport. This cold side charge pipe allows you to do that while getting rid of the prone to cracking plastic charge pipe, and plastic DV's. If you do want to keep the DV set up, we also offer a DV charge pipe. Also available for N55 with no bungs at all, as the DV is on the turbo. Looking for the Charge Pipe & BOV Combo? Click Here -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB Billet Oil/Coolant Fittings, and block offs
$21.99 – $41.99Price range: $21.99 through $41.99VTT Universal Turbo Fittings ā Oil & Coolant Solutions for BMW Turbo Builds!
Looking to fabricate your own turbo kit for BMW platforms? Need an easy solution to block off water lines or create custom feed and drain fittings? Look no further! VTT offers a wide range of high-quality oil and coolant fittings to simplify your build. Our fittings are designed for most late-model BMW platforms, providing a plug-and-play solution for custom turbo setups. š Available Fitting Options: š¹ Oil Feed ā -4 AN Male š¹ Oil Drain ā -10 AN Male š¹ Coolant Fittings ā Barbed Male or Block-Off Options -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Oil Block Off Plate
$59.99 – $64.99Price range: $59.99 through $64.99VTT CNC Oil Block off the plate. Use these when you want to delete the stock coolers lines, and run two -10 fittings for your aftermarket oil cooler set up. These provide full flow and get rid of any restrictions. We offer these in THREE colors to match out other N54 billet engine parts such as Oil Cap, PS cap, and Oil Filter housing cap. Available as plate only, with -10 fittings, or -8 fittingsWe suggest running an aftermarket thermostat with a block-off plate to help warm the car up quickly.
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT B58 Gen-1/TU Billet One Way Crankcase Breather
VTT is happy to introduce the first and only available plug and play ONE-WAY crankcase breather kit for BMW B58 applications (Supra is different please go to our Supra section if looking for a supra breather) With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay. FITS with the engine cover on. Engine cover can be removed, and installed without removing the breather. -
Quick View
VTT S65 7075 Vanos Covers
$262.49VTT is proud to offer the only Vanos covers on the market made from 7075 aluminum instead of the much more common 6061. We went with 7075 due to its increased tensile strength and fatigue strength. Each cover is CNC machined from a 7075 billet, anodized in black for corrosion resistance. These covers snap on and replace the factory plastic covers which are prone to failure over time. We ensure a perfect fit on our covers by going through more than 6 different sample designs to land on our final version. These covers have a very tight fit to avoid vibration or chaffing of the engagement dogs. These are the last vanos covers you will ever have to buy. Simply line them up, and snap them on, with no worries of retiming the engine, etc. Features:- Machined from high-strength 7075 Aluminum
- Anodized for corrosion resistance
- Perfect fitment means no issues down the line
- No engine timing tools required
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / Details-
Introducing the VTT OBD-LOCKĀ ā Enhanced Security & Improved Design!
We are excited to announce our OBD-LOCK! This latest version has been completely redesigned for improved strength, ease of installation, and enhanced protection. Key upgrades include:
ā No more OBD port penetration ā eliminates any risk of damage
ā Revised thread style ā prevents stripping for a secure fit
ā Stronger, more durable design ā ensures maximum securityUltimate OBD Port Protection
The VTT OBD-LOCK is precision-machined from billet 6061-T6 aluminum and is engineered to completely lock out your OBD port, preventing unauthorized access.
š Anti-Theft Protection ā Prevents thieves from accessing the OBD port to duplicate keys or disable security systems
š Dealer/Tech Lockout ā Stops unauthorized tune changes or system modifications
š Tamper-Proof Design ā Cannot be removed without physically destroying the OBD port unless the correct tool is usedVTT OBD-LOCK ā Version 2 NON-GM
Universal Fit for All Non-GM (General Motors) VehiclesThis device is compatible with all non-GM vehicles, including but not limited to:
-
All VAG group vehicles (VW, Audi, Bentley, etc.) ā including recessed port VW/Audi models
-
Ford, Nissan, Honda, Toyota, Porsche, Dodge, Ram, Jeep, Kia, Subaru, and more
Not compatible with GM (General Motors) vehicles.
VTT OBD-LOCK ā Version 2 GM
Universal Fit for GM (General Motors) Vehicles ONLYThis version is specifically designed for General Motors vehicles, including GM, Chevrolet, Cadillac, Holden, and other GM-branded models.
If your vehicle is anything other than a General Motors product, you will need the Non-GM version.
-
-
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT BMW Billet Coolant Reservoir Cap
$79.99 – $189.99Price range: $79.99 through $189.99VTT is proud to offer our billet replacement for the factory plastic Coolant Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. These Coolant caps retain ALL of the factory provisions by simply allowing you to snap the factory pressure-relief into the new Billet Cap We also designed these caps to complement our N5X Billet Oil caps, N5XBillet Oil filter housing caps, and Billet Power Steering cap and so all 4 will have the same design. We offer these caps in 4 colors - Red, Black, Blue, and Clear anodize, as well as a choice of custom anodize at a cost of $100 extra. -
Quick View
VTT B58 Gen-1 PCV CAP
$147.49VTT Billet B58 Gen PCV Cap replacement. Get rid of your fragile Stock PCV Cap/Diaphragm -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT N5X/S55/N2X Billet BMW Oil Filter housing Cap
$89.99 – $199.99Price range: $89.99 through $199.99VTT is proud to offer our billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap, and the need for a special tool for removal, while adding some pop, and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. They also have cooling fins to help with oil temps. We also designed these caps to complement our Billet Oil caps, and upcoming Billet Power Steering caps, so all 3 will have the same design. Order all 3 - Oil Cap, Oil Filter housing Cap, and Power steering cap for $175 - 10% savings We offer these caps in 4 colors - Red, Black, Blue, and Clear anodize, as well as a choice of custom anodize at a cost of $100 extra. The cap has a 19mm hex for easy installation, and removal, and includes a new sealing O-ring, and a small O-ring for the oil filter cage. -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT/VAG 5×112 to 5×114 Bolt Pattern Conversion Kits
$74.99 – $137.49Price range: $74.99 through $137.49Looking to convert your 5x112 M14x1.50 VAG vehicle to 5x114 to open up your wheel options? We got covered with our VTT wheel stud conversion kits. These kits are forged cold-rolled steel in 10.9 class, with corrosion-resistant zinc coating for years of use, and convert your vehicle to M12x1.50 wheel studs which allow you to fit 5x114 wheels with no other changes.PLEASE NOTE - DO NOT USE ANY HUB CENTERING SLEEVES WITH THESE CONVERSION STUDS, THE LUGS WILL CENTER THE WHEELS. THE USE OF A CENTERING SLEEVE MAY LEAD TO STUDS BREAKING. FOR INSTALLATION YOU MUST SNUG EACH LUB UP SLOWLY, AND IN A STAR PATTERN TO GET THE WHEEL CENTERED ON THE LUGS, FAILURE TO DO SO CAN ALSO LEAD TO FAILURE.
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewN54 Silicone Inlets
$349.99 – $359.99Price range: $349.99 through $359.99VTT silicone inlets are the premier choice for your N54 inlet needs. Made from high quality, wire impregnated silicone, these inlets are a full 6mm thick, and can withstand even the harshest underhood conditions. -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT M14/M12 Titanium Wheel Stud kits
$169.99 – $339.99Price range: $169.99 through $339.99VTT is proud to offer Titanium wheel stud kits for the owner looking for the lowest possible unsprung weight while maintaining high strength, and good looks as all come with an amazing burnt finish. This kit is 60% lighter than factory steel studs and nuts with a total kit of 20 nuts, and studs being 3.1LBS. Sets of 10 are 1.55 lbs -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Billet Check Valves
$27.99 – $31.99Price range: $27.99 through $31.99VTT CNC Billet check valve that can be used for a variety of uses including a vacuum/boost check valve when removing the stock PCV system, and still wanting to run vacuum to the crankcase. Rated at over 100 psi, with a cracking psi of .25psi. -
Quick View
VTT B58 A90/91 Supra Billet One Way Crankcase Breather
VTT is happy to introduce the first and only available plug-and-play ONE-WAY crankcase breather kit for BMW B58TU A90/91 Supra applications. The B58 engine is known for poor PCV and crankcase pressure issues. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay. FITS with the engine cover on. Engine cover can be removed, and installed without removing the breather. -
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT is proud to offer our billet replacement for the factory plastic vacuum tanks that store vacuum from the pump and use it to regulate boost via the solenoids. The stock plastic can, and small plastic nipples on the stock cans have a tendency to crank over time, and if they leak you will get low boost, or no boost, and poor performance. These cans do away with the weak plastic cans while adding some pop, and color to your engine bay. These vacuum cans retain ALL of the factory provisions including mounting points but come with 90-degree fittings for easier routing of the lines We also designed these cans to complement our N54 Billet lineup - N5X Billet Oil caps, N5XBillet Oil filter housing caps, Billet coolant cap, Billet valve cover, billet oil cooler block off plate, and Billet Power Steering cap and so on. All will have matching color We offer these cans in 4 colors - Red, Black, Blue, and Clear anodize -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT B58 GC (54/55), GC-Mid (54/60), GC+ (67/68) Turbocharger Upgrade
$1,859.99 – $3,019.99Price range: $1,859.99 through $3,019.99VTT B58 āGC / GC-MID / GC+ā Turbocharger Upgrades
Wheel Sizing / Power Support
Model Wheel Size (Comp/Turb) Stock Engine Power Range GC 54/55 Up to 600WHP GC-MID (TU ONLY) 54/60 Up to 650WHP GC+ 67/68 Up to 800WHP
Ready to take your B58 platform to the next levelāwithout core charges, long waits, or compromising spool? VTT has you covered. Our 100% new casting B58 GC-Series turbochargers (GC, GC-MID, and GC+) retain the OE packaging advantages while removing the factory airflow limitations and weak internal architecture.
We start by keeping what BMW did right, then eliminate every bottleneck we found: the restrictive factory inlet, inefficient bearing housing oiling, small thrust assembly, and anything else holding the B58 back. Then we incorporate proprietary VTT improvements and cast everything at full OE-level quality.
The result? Serious B58 power made simple. GC turbos are direct bolt-on upgrades that retain all factory connections (oil, water, charge pipe, downpipe) while supporting 600WHP+ ā with factory-like spool.
NOTE: The GC is Super Core ONLY, meaning no exhaust housing; this turbo plugs directly into your factory exhaust housing.
-
Quick ViewBuy all 5 Fittings and Save $6. This product includes all of the fittings listed below.
-
Quick View
VTT “GC” N54 to B58 Coil Conversion Kit
From: $339.99VTT is proud to offer its very own Game Changer N54 to B58 Coil conversion kit for the BMW N54 platform. The N54 has notoriously had ignition problems with the factory coils, while aftermarket upgrades do exist, they can be bulky. While factory coil upgrades such as S55, and our own N54 coil upgrades do provide more spark, the BMW B58 ignition coils are extremely robust and can support well over 1000WHP with no issues. This means a plug-and-play affordable solution that fits like stock, and looks AMAZING doing so! We designed our own 6061-T6 Billet bracket in a plethora of colors including matching shades for every N54 Valve Cover we offer (even the cast wrinkle), and we even went as far as to have some cut-out of 100% carbon fiber sheet for the unmistakable look, and lightweight that only carbon fiber can offer! This means you can mix and match the color of the bracket with coil color, with VC color to truly tailor your engine bay to look exactly how you want it to!Note: Flash setting changes are required when installing the conversion kit to ensure the proper function of the B58 coils with N54 DME. This can be found in most all flashing software settings such as MHD, Bm3, etc.
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Billet N54/N55 Vacuum/Boost Adapter
$53.99 – $69.99Price range: $53.99 through $69.99We are happy to release our BMW B54/N55 (Limited N55 Fitment) vacuum/boost adapter. These go inline with the Throttle Body fitting and provide a full boost/vacuum signal from the manifold. This fitting adds two 1/8NPT bungs to accept any fitting that has 1/8" NPT threads. You can choose options, 1/4" barb, as well as 1/8NPT plugs if you only want one barb, etc. These are perfect for running your PI off manifold pressure which is much more accurate than charge pipe, and they are also great for BOV running the proper size line without having to drill a hole in your manifold. These do space out any sensors etc giving inaccurate readings like some of the other brands do. They are made from 6061-T6 anodized black, with steel plugs, and Blue Anodized barbed fittings. You can choose to order in a few ways. You can choose straight or 90-degree barbs. Adapter alone - $40 Basic kit - 1 Adapter, 1 barb, and one plug, one vacuum cap, and one zip tie $45.00 Dual Barb kit - 1 Adapter, 2 barbs, one vacuum cap, and one zip tie $55.00 -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT N5X/M5X/N2X Billet Power Steering Cap
$79.99 – $189.99Price range: $79.99 through $189.99VTT is proud to offer our billet replacement for the factory plastic Power steering cap. This cap does away with the weak plastic cap, while adding some pop, and color to your engine bay. These Power Steering caps retain ALL of the factory provisions including dipstick, and vent hole We also designed these caps to complement our N5X Billet Oil caps, and N5XBillet Oil filter Caps caps, so all 3 will have the same design. Order all 3 - Oil Cap, Oil Filter housing Cap, and Power steering cap for $175 We offer these caps in 4 colors - Red, Black, Blue, and Clear anodize, as well as a choice of custom anodize at a cost of $100 extra. -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewN54 CHRA REPLACEMENT OEM / STAGE 1
$589.99 – $1,289.99Price range: $589.99 through $1,289.99Need N54 turbo replacements, don't have full turbo replacements in your budget,Ā like wrenching on your own stuff? If you answered yes to any of those questions, the VTT N54 CHRA replacements are perfect for you! -
Quick View
VTT VAG Billet One Way Crankcase Breather
VTT is happy to introduce the first and only available plug and play crankcase breather kits for ALL VAG (VW/AUDI/Porsche) applications that use the latch type in the photos(full application list below). With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay. -
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsDo you work on BMW engines across multiple platforms? Tired of modifying universal engine stand plates just to make them fit? Frustrated by losing access to the flywheel side once the engine is mounted?
We were tooāso we built the solution.
The VTT BMW Engine Stand Plate is a true bolt-on design that keeps the flywheel end fully accessible while providing a strong, stable mounting solution for your engine builds.
Machined from solid 6061-T6 billet aluminum and anodized in five colors for long-term durability and corrosion resistance, these plates are lightweight yet rated for over 1200 lbs.
Fitment: N54, N55, S55, B58, S58 (more coming soon)
- Note: The stand tube is 60mm or 2.36ā OD, which fits most engine stands, but not allāplease measure before purchasing.
Key Features:
- Lightweight, high-strength billet 6061-T6 construction
- Durable anodized finish
- Direct bolt-on to intake-side motor mount location
- Full clearance for accessories and flywheel/flex plate access
- Built-in provisions for locator pin and rotation bar
-
Quick ViewLooking for a little extra clearance on your coolant tank fitting due to relocation for single turbo, forward-facing intake manifold, etc. This 90-degree fitting will allow you to run the hose straight down instead of straight out, and increase your clearance, and routing choices. Made of 6061-T6 and anodized black for a long-lasting finish. Comes with fitting, and 1 clamp.
-
Quick ViewThis is an easy way to order all 3 VTT Billet engine caps for Valve Cover, Power steering, and Oil Filter Cap. We offer these caps in 4 colors - Red, Black, Blue, and Clear anodize, as well as a choice of custom anodize at a cost of $399 total for custom
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick View
VTT N54 “Spline Lock” CrankHub Solution
$819.99 – $939.99Price range: $819.99 through $939.99VTT āSpline Lockā Crank Hub System ā N54 / N55 / S55
VTT is proud to offer theĀ only complete crank hub solutionĀ for BMW N54, N55, and S55 engines thatĀ does not require drilling the crankshaft for pins.
Our innovative hub features proprietaryĀ Spline Lock Technologyāa high-tolerance, precision-machined spline system that presses into the crank andĀ positively locks the hub in place, eliminating the need for traditional pinning or welding.
After months of rigorous development and over 10 different prototype revisions, our final production version was put to the test. In our in-house trials, the hub outperformed expectationsābreaking our testing rig before it ever slipped. Real-world validation has been conducted on the VTT N54 race car, which spins toĀ 8,000 RPMĀ and produces overĀ 900 WHP.
Key Benefits:
-
No crank drilling requiredĀ ā stock-like installation
-
Minimal laborĀ ā fully reversible with no permanent modification
-
Tested to extreme conditionsĀ ā race-proven at high RPM and power
-
Exclusively compatible with VTTās Crank Bolt Capture (CBC)Ā for maximum security
ā ļøĀ Spline Lock hubs are recommended be used with the VTT Crank Bolt Capture system. They are not intended to run independently.
-
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT is proud to announce our F/G Series B58 engine catch can set up. This kit uses our already extremely popular modular catch can, and couples it with a custom CNC 6061 bracket, VTT CNC banjo fittings, VTT 5 ply silicone hose, and Push lock fittings. Install is simple, takes about 30 minutes to 2 hours depending on your skill level, and requires removing one factory hose to install the VTT hoses. Giving an OEM fit and finished when installed. Our kit stands out from others on the market by using high-quality AN fittings, and VTT Banjo adapters. G series fits all 2019+ G Series 3/4 BMW vehicles with the B58TU engine, F Series fits all 2015+ F3X series BMW vehicles with the B58 engine. May NOT fit all F series as some 2 series chassis may be different. -
Quick View
N54 Head Port Block Off Kit
$37.99VTT Head Port Block-Off Kit
The VTT Head Port Block-Off Kit is designed to seal the built-in ports in the cylinder head that utilize engine vacuum to clear the low-side PCV system. This factory setup can draw oil into the intake manifold, leading to valve carbon buildup and other unwanted issues.
Kit Includes:
-
6 precision-fit set screws
-
Engine-specific tap
This kit is compatible with N54 engines. Each kit is supplied with the correct tap for your specific engine type.
-
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT N54, N55, S55, N20, B58 Billet Motor Mount Inserts
$179.99 – $474.99Price range: $179.99 through $474.99 -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Thermo-Isolating O2 Bungs
$52.49 – $84.99Price range: $52.49 through $84.99Price is for Single Bung only. -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick View
BMW/Toyota M14x1.25 to M14x1.50 Wheel Stud conversion Kits
$74.99 – $137.49Price range: $74.99 through $137.49Looking to convert your Supra or G Series BMW to wheel studs. Want to get rid of the difficult to find M14x1.25 ultra-fine thread and convert it to M14x1.15? We got covered with our VTT wheel stud conversion kits. These kits are forged cold rolled steel in 10.9 class, with corrosion-resistant zinc coating for years of use, and convert your M14x1.25 vehicle to M14x1.50 wheel studs. -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick View
BMW/Toyota 5×112 to 5×114 Bolt Pattern Conversion Kits
$74.99 – $137.49Price range: $74.99 through $137.49Looking to convert your 5x112 M14x1.25 vehicle such as A90/91 Toyota Supra, and 2020+ BMW G-series to 5x114 to open up your wheel options? We got covered with our VTT wheel stud conversion kits. These kits are forged cold-rolled steel in 10.9 class, with corrosion-resistant zinc coating for years of use, and convert your vehicle to M12x1.50 wheel studs which allow you to fit 5x114 wheels with no other changes.PLEASE NOTE ā DO NOT USE ANY HUB CENTERING SLEEVES WITH THESE CONVERSION STUDS, THE LUGS WILL CENTER THE WHEELS. THE USE OF A CENTERING SLEEVE MAY LEAD TO STUDS BREAKING. FOR INSTALLATION YOU MUST SNUG EACH LUB UP SLOWLY, AND IN A STAR PATTERN TO GET THE WHEEL CENTERED ON THE LUGS, FAILURE TO DO SO CAN ALSO LEAD TO FAILURE.
-
Quick ViewAre you building a single kit for the N54, N55, or S55 platform? The stock studs are usually a little bit short for most single-head flanges, and finding M7 studs is not easy. So we made our own longer studs to combat the issue. Made from 10.9 grade steel, and coated in black oxide, these are the perfect solution to the short stud problem. Sold individually so order the number you need. Stud details are as follows
- Overall length 47mm (stock 39mm)
- 3mm shoulder
- 6mm head which is 5mm hex
- 14mm short end
- 24mm long end (stock 15mm)
Dont forget our M7 copper lock nuts as well to complete the job - https://vargasturbo.com/product/vtt-fab-m7-copper-locking-exhaust-nuts/
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick View
VTT/VAG Wheel Stud Kits
$74.99 – $137.49Price range: $74.99 through $137.49Looking to convert your VAG M14x1.5 vehicle to studs for ease of wheel install, and extra strength? We got covered with our VTT wheel stud kits. These kits are forged cold-rolled steel in 10.9 class, with corrosion-resistant coating for years of use. This kit is Black with black Nuts. -
Quick ViewOut of stockLooking to spice up the engine bay of your Audi/VW or Porsche without spending a ton of money. Our Billet Oil caps come in 5 colors plus a custom option and will look great in any engine bay. CNC machined from a billet of 6061-T6 Aircraft aluminum they sport a factory fit and finish with a Viton O-ring for long a leak-free life. They fit a WIDE variety of vehicles and directly replace your factory oil cap.
-
Quick View
N55 Stage 1 JB Upgrade Kit (NEW)
From: $1,244.98WHP Level supported (with proper fuel, upgrades, and tuning) Stock ā 425WHP -
Quick View
VTT S65 Billet Spark Plug Tubes
$147.49Tired of oil leaks from your plastic OEM S65 spark plug tubes? So were we, so we did something about it! VTT Anaodized billet 6061 Aluminum S65 spark plug tubes. We took the OEM tubes and redesigned them. Then machined them out of billet 6061, anodized them in black, and added a US-made Viton O-ring with more surface area to ensure a leak-free connection for the life of your S65 that will not break down over time. These are the perfect to upgrade when doing a VC replacement, or upgrading to VTT Billet S65 VCs! These are available in sets of 8. Kit includes:- 8 S65 Billet Spark Plug Tubes
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT PCV Delete fitting
$53.99 – $79.99Price range: $53.99 through $79.99 -
Quick View
VTT Modular Cast Aluminum CNC Valve Cover Kit
From: $967.44VTT Cast Aluminum Valve Cover ā N54
Upgrade your BMW N54 with VTTās Cast Aluminum Valve Coverāa durable, high-performance alternative to the factory plastic cover. This version offers the same precision machining as our billet model, but at a lower cost, making it the best bang-for-your-buck valve cover upgrade.
By eliminating the factory PCV system, this valve cover allows full customization of your PCV setup. It is also fully modular, meaning it seamlessly integrates with all VTT PCV fittings, breather options, and accessories.
Built from aircraft-grade aluminum, powder-coated in three bold colors, and fully baffled to prevent unwanted oil escape, this cover is a must-have for N54 owners seeking longevity, reliability, and performance.
Key Features & Benefits:
ā Cast CNC 6061-T6 Aircraft-Grade Aluminum Construction ā Built for strength and durability
ā Powder-Coated in Multiple Colors ā Choose from Black Wrinkle, Blue Wrinkle, or Red Wrinkle for a flawless finish
ā Lightweight Design ā Weighs 9.0 lbs (compared to 7.9 lbs for the stock coverājust a 1.1 lb difference)
ā Fully Modular PCV System ā Compatible with all VTT PCV fittings, breathers, and accessories
ā Cost-Effective Alternative ā More affordable than other non-modular cast options
ā Fully Baffled Ports ā Prevents unwanted oil escape
ā Direct Fit for BMW N54 Engines ā Includes a new factory gasket and all required installation hardware -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Modular PCV/Catch Can (Ready to install kits)
$232.49 – $474.99Price range: $232.49 through $474.99VTT Ultimate Modular Valve Cover & PCV System
VTT is proud to introduce a ground-up system that gives the end user complete control over their valve cover and PCV setup. Tired of being told you must run two -10AN lines from your valve cover to your catch can? So were we. This system allows you to configure it exactly how you wantārun it fully VTA, use an oil cap one-way breather, or create your own hybrid setup. Nothing else on the market matches the versatility and functionality of this modular system.
Itās the ULTIMATE Valve Cover & PCV Comboāor choose just the components you need. Run as many or as few connections as you like.
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewN55 Installation kit
$74.99 – $189.99Price range: $74.99 through $189.99 -
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT is proud to offer a Titanium hardware upgrade for all our Billet and Cast VC's. This will come with M6x30 Ti bolts N54 /N55/S55/B58 Gen 1/ B58 TU it will be an Umbrella head with a 16.3mm head. These bolts weigh half as much as comparable steel hardware and look amazing. Colors to choose from will be Burnt, Black, and Natural (silver) -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT- S55 / N55 PCV Delete kit
$99.99 – $399.99Price range: $99.99 through $399.99Have a problematic PCV on your S55/N55 powered BMW, don't want to pay to replace the entire VC? The VTT PCV delete kit is just what you need. This kit blocks the factory PCV from pulling from the head ports, gets rid of the tear-prone rubber diaphragm, and essentially converts your VC into VTA through the factory front port on the VC. This kit can work stand-alone with the cap, and a -10 ORB plug, can be used to run an extra breather port, or it can be installed with any Catch Can kit that uses the front port of the stock VC. Simply remove the factory cap, take out the diaphragm, screw the plug into the center port, and tap the new cap on with a soft blow hammer or similar. This deletes the PCV and allows you to avoid the issues of a failed diaphragm. Kit Choices- Cap and -10ORBĀ plug only (to be used with an existing catch can or VTA)
- Cap and Catch can kit (recirc or VTA) Complete kit to delete the PCV, and run a catch can (Currently works with S55 only)
- Cap Only (To be used if routing an additional hose from the cap to location or set up of choice, requires your parts to work)
- 1 PCV Cap
- 1 PCV port block off Plug
- 1 -10 ORB Plug
- Optional Catch Can kit
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT VAG/BMW/TOYOTA Billet Wheel Spacers
$21.99 – $37.99Price range: $21.99 through $37.99VTT Billet Wheel Spacers
VTT is proud to offer billet wheel spacers for most VAG, BMW, and the A90/91 Toyota Supra platforms.
Each spacer is:
-
CNC-machined from 6061-T6 aluminum
-
Hard anodized black for a long, corrosion-free life
We offer multiple fitments and sizes to suit a wide range of applications.
THESE ARE SOLD INDIVIDUALLY, FOR ONE AXLE ORDER TWO FOR A COMPLETE SET ORDER FOUR.
ANYTHING OVER 5MM WILL REQUIRE LONGER BOLTS OR STUDS. YOU CAN CHOOSE TO ADD A VTT WHEEL STUD KIT FROM THE OPTIONS.
PLEASE DOUBLE CHECK YOUR BOLT PATTERN AND HUB BORE BEFORE YOU ORDER. INSTALLED SPACERS CANNOT BE RETURNED!
-
-
Quick View
N54 Stage 1 Upgrade Kit (Fits all N54 models LHD & RHD)
From: $2,039.99WHP Level supported (with proper fuel, upgrades, and tuning) Stock - 525WHP -
Quick View
VTT PCV Flapper delete
$59.99Made of 6061-T6 aircraft aluminum anodized black, comes with O-ring, and stainless steel holding clip -
Quick ViewLooking to fix the diff bolt issue on your F9X X3/4M? VTT has taken a 3 pronged approach by offering a triple solution, one part of the solution is the Rear diff bushing insert kit. This is pressed into the factory bushing and fills the voids in the bushing. This keeps the stock bushing ride compliance but removes any unwanted movement. These are sold as a kit and are available in rear side only, and front and rear sides both. Adding in the front side increases installation time, and difficulty as the diff will need to be dropped, and a tool will need to be used to press in the front side bushing Kit includes:
- One Billet Bushing insert
- Two 46mm Hardened Steel Washers
- One 12.9 M14 Bolt
- One M14 Lock nut
- Optional front side bushing which will fully lock down the bushing. (requires the diff to be lowered, and the bushing pressed into the front)
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewS55 “GC” Turbocharger Upgrade
$4,059.99 – $5,019.99Price range: $4,059.99 through $5,019.99WHP Level supported (with proper fuel, upgrades, and tuning) Stock-800WHP VTT S55 GC Turbochargers.Ā GC stands for "Game Changers" and that is exactly what these do! They bring a fully new casting Stainless Steel turbine manifold/housing, all new compressor housing with single piece high flow inlet, as well as our tried, and true V2 GC CHRA with a Mar-M246 GTX28 profile turbine wheel, and custom compressor wheel. These turbos have NO core charges, keep your stock turbos, sell them, hold them if you want to go back to stock etc. The turbos will come with custom VTT silicone inlet hoses to mate up with all inlets on the market making them 100% plug, and play. There is no better, more powerful, or well thought out upgrade on the market at any price point! -
Quick View
VTT G Series S58 Billet One Way Crankcase Breather
VTT is happy to introduce the first and only available plug and play ONE-WAY crankcase breather kit for BMW G series S58 applications With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay. FITS with the engine cover on. Engine cover can be removed, and installed without removing the breather. -
Quick ViewGet rid of the restrictive stock plastic intake on your E-Series N55 powered BMW, and replace it with our 2.5 full flow aluminum intake. This is a MUST when upgrading turbos, or trying to get the most from your stock turbo. Constructed of high-grade aluminum, and powder coated with a very durable gloss black finish this upgrade looks as good as it performs.
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe stock outlet adapter on the N54/55 is NOTORIOUS for cracking when removing. This Billet replacement ensures no leaks, and no more cracked adapters. Available in 6 colors! Black, Red, Clear, Blue, Purple, Gold -
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT is Proud to offer our Billet Aluminum DCT Transmission pan. This pan does away with the factory plastic pan and upgrades it to 6061-T6 aluminum anodized in a variety of colors. This pan increases fluid capacity by 80% or almost DOUBLE the stock pan, has a US-made reusable Viton Gasket, a rare earth magnet built in to pull metal from the fluid, machined external fins to help aid in cooling, and a -6 ORB drain plug. Product Features:- Billet constructionĀ using 6061-T6 aluminum for long life, and added strength
- 80% or Almost DOUBLE the factory fluid capacity at 2000ML compared to 1150ML
- Machined fins for improved cooling
- Rare Erath magnet built in to pull metal from the fluid
- US-Made Viton Gasket
- -6 ORB drain plug for easy service
-
Quick ViewLooking to go above 45 psi in your BMW-powered vehicle? Looking for a plug-and-play solution? We have you covered with our BMW 5 bar sensor. These will allow 58 psi to be read and are factory plug, and play. Simply remove your old sensor, replace it with the 5 bar, and have your tuner rescale your map values in both your DME tune and your PI tune if applicable.
-
Quick ViewAre you building a single kit for the N54, N55, or S55 platform?Ā M7 Locking exhaust nuts is not easy. So we made our own to combat the issue. These are the perfect solution to the problem of hard-to-find M7 lock nuts. Sold individually so order the number you need.
Note:Ā This is nuts ONLY Stud not included, by our extended M7 studs here - https://vargasturbo.com/product/vtt-fab-extended-m7-n54-n55-s55-b58-2-port-head-studs/
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStop the Flex. Launch with Confidence.
Soft bushings are the enemy of hard launches and drivetrain longevity. The factory BMW transfer case bushingsāespecially on the G8X and F9X platformsāare notoriously soft. Thatās the last thing you want when youāre putting serious power down.
Sure, you could replace the entire bushing with a solid one, but that often requires lowering or removing the transfer caseānot to mention the added NVH (noise, vibration, and harshness) that comes with it.
Our transfer case bushing inserts offer a smarter solution: reduce bushing flex without sacrificing comfort. You keep smooth, quiet drivability around town and at idleābut when itās time to launch, the transfer case stays planted.
Fitment Notice ā Two Versions Available:
BMW uses two different transfer case bushing types. We now offer Version A and Version B inserts to match.
ā ļø You must physically inspect your vehicleās bushing to determine which version you need.
We are not responsible for incorrect orders if this step is skipped. -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB Billet Mac Solenoid brackets
$49.99 – $53.99Price range: $49.99 through $53.99Building a kit using Mac solenoids to control boost? Need an easy way to mount it? VTT-FAB has you covered with our billet Mac Solenoid brackets. Machined from 6061 billet and anodized in 3 colors, these are the perfect way to mount your Mac valve and look good while doing it. Each kit includes:- One Mac Solenoid bracket (3-Port or 4-Port)
- 2 Allen screws to hold the valve to the bracket
- M6 Moutning Bolt
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Billet BMW B58 Vacuum/Boost Adapter
$53.99 – $69.99Price range: $53.99 through $69.99We are happy to release our BMWB58 (Fits ALL B58 models including TU found in the A90/A91 Toyota Supra) vacuum/boost adapter. These go inline with the intake manifold fitting and provide a full boost/vacuum signal from the manifold. This fitting adds two 1/8NPT bungs to accept any fitting that has 1/8" NPT threads. You can choose options, Fitting by itself, 1/4" barb, as well as 1/8NPT plugs if you only want one barb, etc. You can choose straight or 90-degree barbs. Once installed it tucks perfectly under your engine cover. These are perfect for running your PI switch off manifold pressure which is much more accurate than charge pipe, and they are also great for BOV running the proper size line without having to drill a hole in your manifold. These do space out any sensors etc giving inaccurate readings like some of the other brands do. They are made from 6061-T6 anodized black, with steel plugs, and Blue Anodized barbed fittings. You can choose to order in a few ways. Adapter alone - $40 Basic kit - 1 Adapter, 1 barb, and one plug $45.00 Dual Barb kit - 1 Adapter, 2 barbs, $55.00 -
Quick ViewLooking to make sure all metal contaminates that are possibly in your oil are not circulated? VTT has you covered with our Titanium Magnetic oil drain plugs for BMW, and any other vehicle that uses an M12x1.5 drain plug. This drain plug will capture any ferrous metal in your oil, and capture it to be cleaned during your next oil change. It also is stronger than a Steel or Aluminum drain plug, and looks cool! These are made from GR5 Titanium and use a rare earth magnet to capture metal particles in your oil... Kit includes:
- 1 Titanium Drain Plug
- 1 M12 Crush Washer
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT VC, and Catch can kit. ALL YOU NEED
$1,289.99 – $1,859.99Price range: $1,289.99 through $1,859.99One of the most common emails we get here at VTT is regarding VC set up with catch cans, and which fittings to pick, how to set it up, etc. This kit does away with all of that, and we give you exactly what you need to g to external PCV on the N54 from the experience of installing hundreds of kits. -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT 10th Gen Honda Civic GC Turbocharger Upgrade
$1,389.99 – $1,609.99Price range: $1,389.99 through $1,609.99Support power level GC Stock-350WHP GC+ Stock-400WHP Ready to take your 10th Gen to the next level?Ā Don't want to deal with core charges, long lead times, or restrictive factory housings? Look no further! VTT has you covered with our 100% new castingĀ āGCā turbocharger upgrade. We start by keeping the great design elements of the factory 1.5L turbo and removing the not-so-great ones such as the small factory inlet area, bearing housing oil structure, thrust bearing, and anything else we saw that could be improved upon.Ā With the basics covered, we stepped it up a level by adding proprietary VTT changes and finished off by having all these parts cast to OE quality.Ā What this means for you is serious 1.5L power made easy; GCs are a drop in turbocharger upgrade that supports up to 400WHP while maintaining near factory spool and all factory connections including oil, water, downpipe, and charge pipe. -
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT is proud to offer the very best charge pipe solution for the VAG MK7 Golf/Jetta/A3 platforms. This system completely does away with the restrictive, and muli-connection stock charge pipe system, and replaces it with two single 6-ply, Heat Resistant, Wire reinforced silicone charge pipes rated at over 200 psi.Ā They are molded for the perfect fit in your engine bay, while not sacrificing anything in the way of flow or size. -
Quick ViewThis harness allows you to run aftermarket brakes and not have the brake warning light on the dash due to the brake pad wear sensor being left unplugged. Direct plug, and plug, unplug the wear sensor and plug this in. Nothing else is required. Kit includes: One harness
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT is proud to offer our billet replacement for the BMW B58 factory plastic Oil filter housing cap. This cap does away with the weak plastic cap while adding a strong magnet to pull metal from the oil, and some pop/color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. We offer these caps in 4 anodized colors - Red, Black, Blue, and Clear -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT 8V RS3/8S TTRS Silicone Charge pipes
$222.49 – $474.99Price range: $222.49 through $474.99VTT is proud to offer the very best charge pipe solution for the Audi 8V RS3 platform. This system completely does away with the restrictive, and muli-connection stock charge pipe system, and replaces it with two single 6-ply, Heat Resistant, Wire reinforced silicone charge pipes rated at over 200 psi.Ā They are molded for the perfect fit in your engine bay, while not sacrificing anything in the way of flow or size. They also completely isolate your charge air from any additional heat soak coming in from the engine or ambient heat. -
Sale!Quick View
VTT Cold Side Charge Pipe / Turbosmart BOV Kit
$409.99Original price was: $409.99.$409.79Current price is: $409.79.A plug and play BOV option for your N54. This kit comes with everything you will need to replace your undersized factory DV with a high quality Turbosmart Race port. -
Quick ViewLooking to remove the HPFP or DI system on your N54? this plate will block the vacuum pump and prevent oil leaks. You will need to remove any fuel lines, etc. Kit includes
- Block Plate
- 3 bolts
- O-Ring
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / Details -
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewN55 VR9 TurboSmart KOMPACT EM DV
$230.37 – $270.74Price range: $230.37 through $270.74VTT Is proud to offer the Turbosmart Kompact EM DV for the N55 The award-winning Kompact EM series Diverter Valves, are the worldās first truly plug and play Diverter Valves. Simply unplug and unbolt your OEM Diverter Valve, and install ours in its place. No adapters, hoses, or extra assembly required. All this while retaining complete OE control of the DVās operation. -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewCatch Can – Fitting A
$15.99 – $41.99Price range: $15.99 through $41.99 -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Carbon Fiber Dragy Holder
$21.99 – $51.99Price range: $21.99 through $51.99Tired of your Dragy flying all over the car as you try to do runs? Tired of low sats or no sats warning due to improper location of the Dragy in the vehicle? Well say goodbye to those issues with our new Carbon Fiber and Plastic Dragy holders. These are made from either 100% Pre-Preg Carbon Fiber, or molded plastic for a perfect fit. The carbon fiber gives it just the right look to add to your performance vehicle! Each holder has dual Suction cups and will stick to any smooth surface. We suggest mounting them in the upper left or right corner of your windshield with a full view of the sky. Dragy holder features- Stop your Dragy from flying off the dash, and having to search for it
- Position your Dragy in the optimal position for the best satellite coverage
- VTT Dragy holder exposes the entire top of the Dragy so nothing is blocking the receiver from the Satellite
- The charging port is not blocked and can be accessed with the cover on
- Choose from REAL Carbon Fiber or Molded Plastic
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPut an end to the dreaded plastic PS pulley issues with our 100% Billet Aluminum PS pulley. We make these from 6061-T6 aluminum and anodize them in one of 5 colors (Black, Red, Blue, Gold and Clear) for a great look, and long-lasting finish. These weigh 7Oz, very close to the weight of a stock pulley, and are lighter than the cast aluminum versions on the market. Kit includes:- One Billet Power Steering Pulley
- All BMW S65
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT noticed a hole in the VTT A9X Supra/BMW Z4 / G2X / G42 Billet Diff Lock Down Kit market for a high-quality, lightweight, NVH-friendly, and easy-to-install Diff Lock Down kit to improve diff stability under launching, and hard cornering. So we did something about it and went to work on a very innovative design that 100% positively locks the diff down from movement, while shielding it from adding a ton of NVH, and can be used with the stock diff, and subframe bushings. This design uses existing mounting points on the vehicle, you do NOT have to remove the subframe or the Diff to install. Simply remove 4 diff bolts, drill two holes in the subframe slightly bigger, install two M10 riv-nuts, and install the lockdown, you do not even have to move the exhaust. A typical install can be 15-30 minutes for someone who is experienced working on vehicles, an hour if you like taking it slow. You WILL need a Riv-nut tool to install the Riv-nuts, we provide a link below for what we recommend on Amazon. Features:- Lightweight 1.5 lbs for the entire lockdown plate
- Uses FOUR connection points on the Diff, and two on the subframe for the ultimate in positive diff location, this will stop all diff movement on launch, saving your guibos, etc
- 100% Billet construction from 6061-T6 aluminum
- Anodized in 4 colors for corrosion resistance, a long-lasting finish, and good looks
- The subframe does NOT have to be removed for installation
- Uses all 12.9 grade hardware
- Does not add excessive NVH
- Positively locks down the diff to eliminate all unwanted movement under launches, acceleration, cornering, etc.
-
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT BMW Carbon Fiber Driveshaft
$1,699.99 – $1,878.49Price range: $1,699.99 through $1,878.49VTT Carbon Fiber Driveshaft for BMW Applications
Why overpay for a carbon fiber BMW driveshaft?
VTT is proud to offer a premium carbon fiber driveshaft manufactured exclusively for VTT in the USA by GCDS (Gulf Coast Driveshaft) ā one of the premier driveshaft manufacturers in the country with extensive experience in high-performance and drag racing applications.
Each driveshaft is constructed using 3.31" carbon fiber tubing, paired with NEAPCO Performance 1350 series U-joints, then bonded using a proprietary high-strength process and precision balanced to within 1/8 in-oz as a complete assembly.
Every shaft is torque tested in-house prior to shipping to ensure proper bonding and structural integrity. GCDS and VTT are among the few manufacturers that perform full torque testing on each shaft before it leaves the facility.
To complete the system, the driveshaft is paired with VTT-designed 7075 aluminum adapters, eliminating the factory guibos and unnecessary flex points. The shaft connects directly to the BMW 3-bolt front flange, while a VTT 4340 rear adapter replaces the factory slip-in / screw-retained shaft design for improved strength and reliability.
Proudly Made in the USA.
PLEASE NOTE! YOU MUST SEND US YOUR VIN NUMBER TO PROPERLY PROCESS YOUR ORDER, IF YOU DO NOT SEND YOUR VIN, YOU ORDER IS GOING TO BE HELD
PLEASE NOTE! Driveshafts can have UNUSUALLY LONG LEAD TIMES. We hope to reduce this with GCDS, but if the shaft shows OUT OF STOCK, expect a lead time of 4ā8 weeks, unless we specifically state that it can ship sooner.
Due to the nature of these shafts being manufactured by a 3rd party, ANY ORDERS PLACED FOR VTT CF DRIVESHAFTS ARE 100% FINAL.
NO REFUNDS. NO CANCELLATIONS. FOR ANY REASON.
THIS INCLUDES LONG LEAD TIMES.
PLEASE ORDER CAREFULLY. ONCE THE ORDER IS PLACED, IT IS FINAL.
-
Quick View
N54 Stage 2 Kit (Fits all N54 models LHD & RHD)
From: $2,329.99WHP Level supported (with proper fuel, upgrades, and tuning) Stock - 625WHP -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT BMW F8X S55 Engine Catch Can
$339.99 – $359.99Price range: $339.99 through $359.99VTT is proud to announce our F8X Series S55 engine catch can set up. This kit uses our already extremely popular modular catch can, and couples it with a custom CNC 6061 bracket, VTT CNC banjo fittings, VTT 5 ply silicone hose, and Push lock fittings. Installation is simple, takes about 30 minutes to 2 hours depending on your skill level, and requires removing one factory hose to install the VTT hoses. Giving an OEM fit and finish when installed. Our kit stands out from others on the market by using high-quality AN fittings, and VTT Banjo adapters. This is the ONLY catch can kit that is plug, and play with our CNC Billet Valve cover -
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT noticed a hole in the F9X X3/4M market for a high-quality, lightweight, NVH-friendly, and easy-to-install Diff Lock Down kit to improve diff stability under launching, and hard cornering. So we did something about it and went to work on a very innovative design that 100% positively locks the diff down from movement, while shielding it from adding a ton of NVH, and can be used with the stock diff, and subframe bushings. This design uses existing mounting points on the vehicle, you do NOT have to remove the subframe or the Diff to install. Simply remove 4 diff bolts, drill two holes in the subframe slightly bigger, install two M8 riv-nuts, and install the lockdown, you do not even have to move the exhaust. A typical install can be 30-45 minutes for someone who is experienced working on vehicles, an hour or two if you like taking it slow. You WILL need a Riv-nut tool to install the Riv-nuts, we provide a link below for what we recommend on Amazon. Features:- Lightweight 1.5 lbs for the entire lockdown plate
- Uses FOUR connection points on the Diff, and three on the subframe for the ultimate in positive diff location, this will stop all diff movement on launch, saving your guibos, etc
- 100% Billet construction from 6061-T6 aluminum
- Anodized in 3 colors for corrosion resistance, a long-lasting finish, and good looks
- The subframe does NOT have to be removed for installation
- Uses all 12.9 grade hardware
- Does not add excessive NVH
- Positively locks down the diff to eliminate all unwanted movement under launches, acceleration, cornering, etc.
-
Quick ViewTired of getting off the dyno, and having your drivetrain malfunction light on due to a broken plastic ride height bracket? So were we, after we broke 3 of them, we knew it was time to make our own to combat the issue. This bracket is cut from 6061-T6 for strength and anodized black for a long-lasting finish.
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT N54/55 BMW Single Piece Silicone Cold Side Charge Pipe
$112.49 – $464.99Price range: $112.49 through $464.99VTT is proud to offer the very best charge pipe solution for the BMW E Series N54/55 platforms. This system completely does away with the restrictive, and muli-connection stock charge pipe system, and replaces it with a single 6-ply, Heat Resistant, Wire reinforced silicone charge pipe rated at over 200 psi.FITMENT:
ā¢ E Series N54 vehicles 335, 135 (Does not fit Z4, and 5 Series) ā¢E Series N55 vehicles 335, 135 (Does not fit SUV or other models) -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT RS3/TTRS Ultimate Front Drag Brake Kit
$1,339.99 – $1,949.99Price range: $1,339.99 through $1,949.99Looking to make you Rs3/TTRS faster in the 1/4 mile or 1/2 mile racing? Want to run 17, or 15" wheels, and slicks in the front? Want to drop close to 65lbs of weight off the front of the car at the same time? Do not want to break the bank while doing so? Look no further than the VTT Ultimake Front Drag kit for the Rs3/TTRS. This kit will allow you to run the wheel/tire combo you need to drop your ET's all while putting the car on a significant diet over the stock front brake setup. The kit is a true plug-and-play setup using Genuine VTT parts, coupled with DOT-approved brake lines, CNC rotor hats/brackets, and a CEL eliminator harness for the brake sensor. This kit comes in 3 different variations in 2 different caliper sizesDisclaimer: The HD kits are designed for street use, and drag racing. Never use for heavy braking racing environments such as Auto-X or Road Racing.Ā Always drive within your limits!
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewBanjo Fitting Upgrade
$31.99 – $64.99Price range: $31.99 through $64.99 -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT “Spline Lock” Hub Puller
$74.99 -
Sale!Quick View
S55 Turbocharger Install Kit
$329.99Original price was: $329.99.$329.93Current price is: $329.93.Everything needed to a successful install without having to make a trip to the dealer. -
Quick ViewLooking for a way to do burnouts in your ATC13-2 Equipped Xdrive BMW that doesn't have an RWD mode such as G-Series non-M vehicles, and SUVs? We were too! VTT is proud to offer the ONLY easy-to-install, plug, and-play Xdriove controller on the market. This device will allow you to turn off, and turn on again your X-drive capability from the driver seat with a remote. While other options do exist such as X-Delete, or an in-dash gauge, one is a very slow process and is not viable to use as a way to do a burnout at the drag strip, and the other is a very expensive, AND very intrusive device that requires removal of most of the dash, and installing a gauge. Our solution takes 30 seconds to install once you gain access to the underside of the vehicle, and can be removed just as easily. Once installed, you can remotely disable your Xdrive from the driver's seat to perform your burnout, and then quickly enable it again to perform your launch with AWD active. This action does NOT require a key cycle, as soon as you activate it again the car will dismiss any lights and codes generated. This truly is the best of both worlds for ease of use, practicality, and effectiveness, all while coming at a very affordable price. This device uses a BMW plug on one end, and our custom-printed male plug on the other, for a plug, and play OEM fit. NO cutting any wires!
PLEASE NOTE: WHEN ACTIVATED YOUR DASH WILL LIGHT UP WITH CODES BECAUSE YOU ARE IN ESSENCE DISCONNECTING THE TRANSFER CASE. YOU MAY ALSO EXPERIENCE SPORT STEERING DURING THIS TIME WHICH MEANS A HARDER-TO-TURN WHEEL. THIS IS ALL NORMAL. WE ONLY SUGGEST USING THE DEVICE FOR SHORT PERIODS OF TIME, SUCH A BURNOUT AT THE STAGING AREA OF A DRAG RACE. IN SOME INSTANCES, THE CAR WILL NOT ALLOW A BURNOUT IF THE BRAKE, AND THROTTLE ARE APPLIED AT THE SAME TIME DUE TO ECU LOGIC, IN THESE INSTANCES INSTALLING OUR WIRELESS LINE LOCK ELIMINATES THIS ISSUE. MANY TIMES AN AFTERMARKET TUNE WILL ALSO ELIMINATE THIS ISSUE.
THIS DEVICE CAN BE USED FOR THINGS SUCH AS DRIFTING DONUTS ETC., BUT WE DO NOT CONDONE ANY DRIVING OUTSIDE OF LEGAL GUIDELINES. PLEASE USE THIS PRODUCT RESPONSIBLY. SEE ABOVE FOR WHAT IS GOING TO HAPPEN WHEN YOU ENGAGE THIS DEVICE
Install/User Guide is here - Install Guide
Features:- Works on any vehicle outlined below from stock to tuned
- 30-second install
- 30-second removal
- NON-intrusive ZERO cutting of wires, or taking anything apart on the vehicle TRULY plug and play
- OEM fit and finish on the plugs
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsThese are Billet 321 Stub transitions to make a perfect transition from B58/S58 Oval head ports to a 1.25" Sch-10 pipe. This saves you a step and valuable time when fabricating a manifold from scratch. Time is money! These fit our B58, and S58 Wire cut flanges for a perfect transition -
Quick View
VTT “GC” S55/N55 to B58 Coil Conversion Kit
From: $339.99VTT is proud to offer its very own Game Changer S55/N55 to B58 Coil conversion kit for the BMW S55/N55 platforms. The 55 series of engines has notoriously had ignition problems with the factory coils, while aftermarket upgrades do exist, they can be bulky. The solution is the BMW B58 ignition coils which are extremely robust and can support well over 1000WHP with no issues. This means a plug-and-play affordable solution that fits like stock, and looks AMAZING doing so! We designed our own 6061-T6 Billet bracket in a plethora of colors including matching shades for every S55/N55 Valve Cover. This means you can mix and match the color of the bracket with coil color, with VC color to truly tailor your engine bay to look exactly how you want it to!Note: Flash setting changes may be required when installing the conversion kit to ensure the proper function of the B58 coils with S55/N55 DME. This can be found in almost all flashing software settings such as MHD, Bm3, etc.
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT is proud to release our very own center feed N54 intake manifold.Ā This is NOT the SAME sheet metal manifold everyone is selling with a different logo on it, this is a ground-up design focusing on utility as well as increased flow capability. We performed CAE/Multiphysics simulation for both steady and unsteady state operating conditions in order to bring real-world performance benefits to your N54 build.Ā Our manifold is stronger, outflows the OEM manifold, and installs just as easily as your stock piece (no custom charge pipe or throttle body harness required).Ā Performance gains of 20-30WHP+ were had with no tune changes on a 570WHP stock motor F-RB lite turbo car at the top of the RPM range where it matters most for performance.Ā These numbers will only increase with ported heads, high lift cams, or even higher horsepower builds! -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick View
VTT BMW M12x1.50 Wheel Stud Kits
$74.99 – $137.49Price range: $74.99 through $137.49Looking to get rid of your factory wheel lugs, and convert them to a high-quality stud kit for track purposes or just to make wheel changes easier? We got covered with our VTT wheel stud conversion kits. These kits are forged cold-rolled steel in 10.9 class, with corrosion-resistant coating for years of use. -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Billet Crankcase Breather replacement filter
$21.99 – $27.99Price range: $21.99 through $27.99Need a replacement filter for your VTT Billet Crankcase breather? You can order on here. We offer them in 3 heights, low 48mm, medium58mm, and tall 68mm. This is measured from base to top. The filter will include a new clamp. For reference: N54/55 mostly use the low A90 Supra use Medium Most Audi applications can fit a tall, but measure your filter before ordering. -
Quick View
VTT N54 “DI Injector” Delete Kit
$339.99Looking to get rid of the troublesome and expensive DI injectors on your BMW N54 and move to PI only and a standalone? If so VTT has you covered with its new N54 PI delete kit. This kit allows you to SAFELY remove the DI injectors, install our delete fittings, and run PI only. We machined these deletes from 310 Stainless for extreme heat, and corrosion resistance, and include 3 hold downs. These DI deletes COMPLETELY get rid of all factory provisions, including the seal. If the seal is left intact with no fuel to cool the injector or delete it will quickly overheat and melt the delicate seal causing combustion gasses to escape the engine creating misfires, and worse possibly damaging your injector bore on the cylinder head. Our deletes are machined to be a press fit into the cylinder, and can be either cooled with liquid nitrogen, and dropped in, or tapped in with a hammer, and then held down with the included hold downs. We also include M6 tapped holes on the top of each one in case they need to be removed you can attach a slide hammer, and remove the delete. These are sold as a kit and come with the following- 6 - 310 Stainless DI Delete fittings
- 3 - Hold down brackets
EXTREME ENGINE MODS ARE REQUIRED TO RUN THIS KIT, PLEASE SEE BELOW
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewToyota Supra A90/91 Carbon Fiber Strut Braces
$284.99 – $339.99Price range: $284.99 through $339.99VTT Billet & Forged Carbon Strut Bar ā A90/A91 Toyota Supra
Building on the success of our Billet G8X Strut Bars, VTT has now engineered a version specifically for the A90/A91 Toyota Supra. This design is a true evolution ā not a metal bar wrapped with carbon overlay, but a genuine forged carbon fiber center section paired with precision-machined billet ends.
Each end is CNC-machined from either 6061-T6 aluminum or Grade 2 Titanium, ensuring exceptional strength, rigidity, and long-term durability. Every piece is finished in-house and anodized in your choice of Black, Red, Blue, or genuine T2 Titanium rainbow finish.
This is a true performance and visual upgrade ā not just an accent piece.
Key Features
-
Real Forged Carbon Fiber Construction ā No metal core or cosmetic overlay; this is a full forged carbon center section.
-
Billet Aluminum or Titanium Ends ā CNC-machined from 6061-T6 aluminum or T2 Titanium for maximum precision and strength.
-
Premium Finishes ā Choose from Black, Red, Blue anodized, or genuine T2 Titanium rainbow finish.
-
Direct Fit Design ā Installs using factory mounting points; designed for a perfect fit on the A90/A91 Supra.
Kit Includes
-
(1) Strut Bar in chosen finish
-
(2) M10 Flange Bolts
-
(2) M8 Flange Bolts and Nuts
Notes
-
2021+ Models: May reuse factory hardware if desired.
-
Intake Clearance: Strut bar may not be compatible with all aftermarket intake systems. Verify fitment before installation.
Description
The VTT Billet & Forged Carbon Strut Bar for the A90/A91 Supra delivers both function and form. With its forged carbon center and billet aluminum or titanium ends, it enhances chassis rigidity while transforming the engine bayās visual appeal. Each unit is precisely engineered to align perfectly with factory mounts, offering a simple, bolt-on installation with no modification required.
If youāre looking for a true performance-grade aesthetic upgrade ā not a fake overlay or cosmetic add-on ā this is the strut bar your Supra deserves.
-
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT A90/91 Supra Single Piece Silicone Charge Pipe BOV Version
$389.99 – $629.99Price range: $389.99 through $629.99 -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT MQB Cast V2 “GC” Turbo Upgrade – G30-770/900
$1,679.99 – $1,999.99Price range: $1,679.99 through $1,999.99BALL BEARING NOW AVAILABLE!
VTT MQB āGCā Turbocharger Upgrade ā MQB IS20 / IS38 Platforms
GC (G30-770 spec / PTE ~58/60) ā Rated up to 550WHP
GC+ (G30-900 spec / PTE ~62/62) ā Rated up to 600WHP
Overview
Ready to take your MQB-powered platform to the next levelāwithout core charges, long lead times, or restrictive factory housings? The VTT V2 āGCā Turbocharger Upgrade is a 100% new casting designed to maximize flow, durability, and power potential while retaining OEM fitment and fast spool.
We retained what works within the factory layout and eliminated what doesnāt: small inlets, restrictive turbo mufflers, undersized bearing architecture, and weak thrust design. The factory IHI CHRA is replaced entirely with our proprietary center section featuring a larger turbine shaft and robust journal bearing systemāsignificantly stronger than anything found in IS20 or IS38 stock frames.
Combined with OE-quality castings, VTT geometry, and refined A/R ratios, the VTT GC platform delivers true drop-in performance capable of 550ā600WHP+ depending on configuration and fueling.
-
Quick View
VTT B58 Engine Lifting hook
$15.99Need to work on the B58 engine outside of the car? Lift it to put on an engine stand etc? BMW makes an engine lifting tab but it costs $25, and they do not always have them in stock. We made our own, to avoid the high cost, and possibly long wait time. The perfect tool when you want to lift the engine balanced in the place BMW designed for it to be lifted. Made out of coated steel for high strength, long life, and corrosion resistance. Fits all B58 models, and possibly S58 -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewReplacement Gasket for VTT Valve Covers
$31.99 – $69.99Price range: $31.99 through $69.99Need to replace the gasket on your VTT Aluminum VC? Simply choose your model from the dropdowns to ensure you get the correct version. -
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewPFS A90/91 Toyota Supra Drop in Brushless LPFP upgrade (800-1000WHP+ Capable)
$943.49 – $1,317.49Price range: $943.49 through $1,317.49PFS is proud to offer a true drop-in 800-1000WHP+ capable LPFP for A90/91 Toyota Supras. This LPFP needs NO additional pumps, wiring harnesses, etc etc. It will support up to 800WHP on Ethanol percentages as high as E98 and will support much higher power levels with less E content as long as you have the octane to support it. For the pump, we start with a factory bucket, we modify it extensively to accept our custom PFS Brushless fuel pump. We then re-terminate the factory wiring to accept the new pump. No wiring splices, done the same way the factory does -the right way. -
Out of stockQuick View
VTT 2.5″ Billet Audi 4.0T Intakes
MSRP: $649.00 - $699.00$609.99 – $669.99Price range: $609.99 through $669.99These are currently out of stock with NO ETA. We have made them so you cannot order for now...
VTT is happy to announce our 4.0T Billet intakes. These intakes get rid of the restrictive factory intakes and replace them with our billet intakes which use a billet flange to connect to the turbos with full 2.5" powder-coated aluminum tubing, which is finished off with our high flow filters. These will remove improve flow and improve turbocharger efficiency. If you want to run the intakes to the stock box, you can by cutting the tubes down and removing the filters as an option which saves $50. These fit most ALL 4.0T Variants. Model fitment- Audi RS6 C7 (4G) / V8 4.0 2013+
- Audi RS7 C7 / V8 4.0 2013+
- Audi S6 C7 / V8 4.0 2012+
- Audi S7 C7 / V8 4.0 2012+
- Audi A8 V8 4.0 2013+
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT S55/N55 EWG BILLET CNC Valve Cover
$1,519.99VTT S55/N55 EWG Billet Aluminum Valve Cover
Performance. Durability. Style. VTT is proud to introduce our S55/N55 EWG Billet Aluminum Valve Cover, built for owners who want to upgrade both form and function. Whether you're looking to replace your aging plastic OEM valve cover or you're running a single turbo conversion and need better clearance and heat resistance, this cover delivers on all fronts. Designed to eliminate the problematic factory PCV system, our cover allows you to configure your PCV setup exactly how you want it. We strongly recommend pairing it with a catch can for optimal performance. Each unit is fully baffled to reduce oil carryover and ensure clean crankcase ventilation.
š ļø Valve Cover Features:
- ā 100% CNC-Machined from 6061-T6 Billet Aluminum
- ā Anodized Finish in a variety of colors for a clean, custom look
- ā Lightweight Design: 9.7 lbs (vs. 7.9 lbs stock ā only 1.8 lb difference)
- ā Fully Modular PCV Configuration ā run it your way
- ā Fully Baffled Ports to prevent oil escape
- ā A must-have for single turbo conversions ā better clearance and superior heat resistance
- ā Durable & Reliable ā a major upgrade from the OEM plastic cover
š¦ Kit Includes:
- (1) Billet Aluminum Valve Cover
- (1) Set of All Required Hardware
- (1) U.S.-Made Viton Gasket
ā ļø Important Installation & PCV Notes:
When upgrading to an aluminum valve cover, you are removing the factory PCV system and its integrated functionality. If you do not replace it with an external PCV setup, your S55 may smoke or bypass oil under boost or idle conditions. We highly recommend the following:- ā At a minimum, install an external low-side PCV to ensure vacuum at idle, which aids in turbo oil drainage
- ā Block off the head ports to relieve pressure on the valve cover gasket and prevent boost leaks into the crankcase
- ā Pair this valve cover with our Modular Catch Can Kits and Head Port Block-Off Kits for the best results
Upgrade your S55 or N55 with confidenceāditch the plastic, control your PCV, and enhance your engine bay with the VTT Billet Valve Cover. -
Quick View
N54 Stage 2+ Kit (fits all N54 models LHD & RHD)
From: $2,559.99WHP Level supported (with proper fuel, upgrades, and tuning) Stock - 675WHP -
Quick View
S55 M3/M4 Silicone Charge Pipes Bundle
From: $409.99VTT silicone Charge Pipes are the premiere choice for your EBM Charge Pipe needs. Made from high quality, wire impregnated silicone, these inlets are a full 6mm thick, and can withstand even the harshest underhood conditions. -
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT 15″/17″ Drag Pack Wheels for BMW/Toyota/VAG
$256.49 – $341.99Price range: $256.49 through $341.99Looking for a Lightweight, AFFORDABLE drag pack that looks amazing for your BMW, Toyota, or VAG platform? Look no further! VTT is proud to announce our lineup of Drag pack wheels for various BMW/Toyota/VAG fitments! We teamed up with Rota and had them open custom molds for us of their extremely popular Grid design. With these molds, we have an exclusive on 15X10, 17X10, and 17X4.5 wheels in our exact specs. The wheels are currently offered in the colors and sizes belowA variety of Offsets are available, as well as spacers here - VTT Spacers can be found here - https://vargasturbo.com/product/vtt-billet-wheel-spacers/
As well as Center bore adapters here -Ā https://vargasturbo.com/product/vtt-billet-hubcentric-wheel-bore-adapters/Wheels are priced EACH, meaning per wheel
PLEASE NOTE! CHECK FITMENT CAREFULLY. ANY WHEELS THAT HAVE HAD TIRES MOUNTED OR ARE DAMAGED DURING TEST FITTING ETC. ARE NOT RETURNABLE!
We make NO CLAIM these fit ANY PLATFORM, or ANY factory brake set up. It is YOUR JOB to measure, and make sure they will fit BEFORE you mount tires or install them. WE NEVER suggest shaving down brake calipers to fit a smaller wheel. If they do not fit. GET A SMALL BRAKE KIT!
Colors offered:- Satin Black
- Gloss Black
- Bronze,
- Gun Metallic
- 15x10 ET45/ET40 (wheel weight 16 lbs)
- 17x10 ET45/ET40/ET25 (wheel weight 19lbs)
- 17x4.5 ET-20 (wheel weight 16 lbs)
- 15x10 ET45 - (wheel weight 16 lbs)
- 17x10 ET45/ET40/ET25 (wheel weight 19 lbs)
- 17x4.5 ET-20 (wheel weight 16 lbs)
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick View
BMW G2X Carbon Fiber Strut Braces
$284.99 – $339.99Price range: $284.99 through $339.99VTT Billet & Forged Carbon Strut Bar ā BMW G2X Platform (2019+)
We took our popular VTT Billet G8X Strut Bars and redesigned them specifically for the BMW G2X platform. This is not a metal bar wrapped in carbon overlay ā itās a true forged carbon fiber strut bar engineered for both performance and appearance.
Each unit features CNC-machined billet ends crafted from 6061-T6 aluminum or Grade 2 Titanium, providing exceptional strength and precision. Every bar is anodized or polished to perfection and available in Black, Red, Blue, or genuine T2 Titanium rainbow finish.
This upgrade dramatically enhances underhood aesthetics while maintaining proper chassis rigidity and fitment across all 2019+ G2X vehicles.
Key Features
-
Real Forged Carbon Fiber Center ā 100% forged carbon, not a metal core with a carbon wrap.
-
Billet Aluminum or Titanium Ends ā CNC-machined from 6061-T6 aluminum or T2 Titanium for unmatched durability and strength.
-
Premium Finishes ā Choose from Black, Red, Blue anodized, or genuine T2 Titanium rainbow finish.
-
Direct Bolt-On Fitment ā Designed to install directly using OEM mounting points. No modification required.
-
-
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewPFS S58 Port Injection Kit
$807.49 – $1,223.99Price range: $807.49 through $1,223.99Looking for some more fuel for your S58 powered BMW? Not looking to run Bulky PI plates, and push your TB and charge tract out of alignment? PFS has you covered with its Plug, and play PI kit for the S58. -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick View
VTT CNC ORB Low Profile High Flow Banjo Fittings
$47.99 – $53.99Price range: $47.99 through $53.99Made from CNC 6061-T6 Aircraft aluminum anodized black for a long-lasting finish. -
Quick ViewLooking to fix the diff bolt issue on your F9X X3/4M? VTT has taken a 3 pronged approach by offering a triple solution, one part of the solution is the front diff bushing inserts. These are pressed into the factory bushing, and fill the voids in the bushing. This keeps the stock bushing ride compliance but removes any unwanted movement. These are sold as a set Kit includes:
- Two Billet Bushing inserts
- Two 46mm Hardened Steel Washers
-
Quick ViewImprove engine/shifting feel without a huge increase in NVH or high cost! VTT G3X/G8X billet motor mount inserts upgrade mounts the way BMW does it, allowing a minimal increase in NVH while stiffening up the engine/shifting feel, and getting rid of excessive engine movement Fitment is below for GXX, G8X M2/3/4, F9X X3/4M using these mount part numbers and possibly others. They do NOT fit every engine option for these chassis. Please inquire first if you have questions 22 11 6 860 471 Engine mount, left G series Non-M 22 11 8 097 149 Engine mount, left G8X M2/3/4 22 11 6 860 457 Engine mount, left F9X X3/4M 22 11 6 860 472 Engine mount, Right G series Non-M 22119503432 Engine mount, right G8X M2/3/4 22116860458 Engine mount, right F9X X3/4M
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT N55 GC/GC+ Turbocharger Upgrade
$2,769.99 – $3,089.99Price range: $2,769.99 through $3,089.99Supported power level: GC Stock-600WHP GC+ Stock-700 WHP Ready to take your N55 to the next level?Ā Donāt want to deal with core charges, long lead times, or restrictive factory housings? Look no further! VTT has you covered with our 100% new casting N55 āGCā andĀ āGC+ā turbocharger upgrade. We start by keeping the great design elements of the factory N55 turbo and removing the not-so-great ones such as the small factory inlet area, bearing housing oil structure, thrust bearing, and anything else we saw that could be improved upon.Ā With the basics covered, we stepped it up a level adding proprietary VTT changes, and finished off by having all these parts cast to OE quality.Ā What this means for you is serious N55 power made easy; GCs are a drop in turbocharger upgrade that supports over 600-700 WHP while maintaining factory like spool and all factory connections including oil, water, downpipe, and charge pipe. -
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewPFS B58 Port Injection Kit
$620.49 – $2,022.99Price range: $620.49 through $2,022.99Looking for some more fuel for your B58 powered BMW? Not looking to break the bank on overpriced PI kits? PFS has you covered with its Plug, and play PI kit for the B58. -
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / Details -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT B58 TU BILLET CNC Valve Cover
$1,769.99VTT Billet Aluminum Valve Cover ā B58 TU
The Only Billet Valve Cover Option for the B58 TU Platform VTT is proud to introduce our B58 TU Billet Aluminum Valve Cover, designed for enthusiasts looking to enhance both the performance and appearance of their engine bay. The OEM plastic valve cover is known to crack over time and contains a problematic built-in PCV system. Our billet cover eliminates those issues and gives you complete modularity and control over your PCV setup. We recommend pairing it with our B58 TU Catch Can Kit for the ultimate crankcase ventilation solution. Additional breather optionsāincluding our oil cap breather and one-way stainless breathersāare also available to further enhance your setup.
š§ Key Features:
- ā 100% CNC-Machined 6061-T6 Aircraft-Grade Aluminum
- ā Anodized in a variety of durable color options
- ā Lightweight at 9.7 lbs (vs. 7.9 lbs for the stock plastic cover)
- ā Includes three shrouded -10 ORB ports for maximum PCV flexibility
- ā Fully baffled ports to reduce oil carryover
- ā Only billet option on the market for B58 TU
- ā Optional Titanium hardware or OEM-style fasteners
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Billet/Silicone B58 F2X/F3X Coolant Hoses
$59.99 – $559.99Price range: $59.99 through $559.99VTT is proud to announce our B58 Gen 1 Billet/Silicone coolant hose upgrade kit! The factory plastic coolant connectors are prone to breaking over time, and the hoses are just your standard run-of-the-mill coolant hose. We wanted to provide an upgrade to both areas. What we came up with is Billet 6061-T6 connectors anodized black for corrosion resistance, and 6-ply silicone molded silicone hoses in the factory shapes. Currently, these fit most Gen 1 B58 applications F2X/F3X. Application chart below.They may not fit some models, we have not test fit on all models.
Please bear in mind, the B58 coolant hoses can be difficult to install, and may require removal of other items on the engine to reach the hose connections.
-
Sale!Quick View
VTT/Rota 15″ Wheels for VAG Platforms
$379.99Original price was: $379.99.$303.99Current price is: $303.99.Finally a reasonably priced set ofĀ Custom 15" wheels in for VAG guys!These are DIRECT plug, and play as long as you have the proper brakes such as our brake kits https://vargasturbo.com/product-category/vw-vag/audi-8v-rs3-ttrs/brake-wheel-audi-8v-rs3-ttrs/ĀSpecs as follows:- 15x9"
- 5x112 Pattern
- Conical Seat (We Recommend running Wheel studs, and the proper lug nut, can be added below)
- ET+36 Offset
- 57.1 bore
- Drilled for 14mm bolts or studs.
- 15.5OZ lbs per wheel
No adapters, no hub-centric rings needed, etc. A 15" wheel designed for the VAG platforms. -
Quick View
N54 F-RB Turbocharger Kit
From: $3,157.47WHP Level supported (with proper fuel, upgrades, and tuning) Stock-850WHP VTT is proud to announce an All-new VTT GC redesign for 2021! The latest in our line of N54 VTT āGCā turbochargers. The GC āF-RBā or Full-Rebrand.ĀThis is an all-new take on the VTT N54 āGCā turbocharger, using 100% new parts throughout that is pure performance. Some of the new groundbreaking features include: All turbine side parts are now fully cast from 310 Stainless Steel for increased temperature resistance, and ultimate corrosion resistance. We also fully redesigned the turbine housing -the F-RB's have a much larger volute as well as a proprietary AR which will dramatically increase flow capacity, helping to eliminate stress on the turbine wheel. Fully redesigned compressor housings which now include V-band OR Hose Barb connection options (while our current stock of hose barb connections last). The CHRAās are redesigned with new compressor wheels, bullet nuts, and better internal parts. These are new turbochargers from the compressor housing to the bearing housing, to the turbine housing, we had them engineered to fit in the stock N54 location, but provide the full flow of a much larger turbo, and providing a flow increase over the V2 āGCā.Ā
With this all-new design, there is no other 850WHP capable turbocharger option on the market single or twins that can match the spool, ease of fitment, power, reliability, OR price of our GC āF-RBāĀ turbochargers!
-
Quick View
N20 Stage 1 upgrade (New)
$1,519.99WHP Level supported (with proper fuel, upgrades, and tuning) Stock - 350WHP Our VTT N20 Stage 1 upgrade consists of a brand new N20 turbo, custom cast and manufactured for VTT, this is coupled with a VTT custom reverse billet 9-blade compressor wheel, and a brand new 9-blade high-flowing turbine wheel. Turbo upgrade is a complete bolt-on with no changes to water or oil lines and is undetectable by the dealership. -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT B58/S58 Head Port Block-Off Kit or Billet check valve kit
$29.99 – $69.99Price range: $29.99 through $69.99VTT B58/S58 Head Port Block-Off / Built Check Valve Kit
The VTT B58/S58 Head Port Block-Off / Check Valve Kit is designed to either seal off or convert the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases ā but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time.
This kit provides two configuration options:
-
Block-Off Version ā Completely seals the factory head ports to prevent oil intrusion and unwanted vacuum leaks.
-
Billet Check Valve Version ā Converts the head ports into a robust internal PCV system using precision-engineered check valves. These one-way valves allow vacuum to function as intended while blocking boost pressure from entering the crankcase or charge tract.
By bypassing the factory PCV valve in the valve cover, the VTT kit replaces it with an improved three-valve internal system integrated directly into the cylinder head. This design improves reliability, simplifies plumbing, and ensures consistent crankcase pressure management ā critical for both stock and high-performance B58/S58 applications. This kit does NOT require any tapping, meaning no metal to get into the engine etc. You simply tap the plugs or check valves into place.
Key Features
-
Eliminates oil draw-through into the intake manifold
-
Prevents carbon buildup on intake valves
-
Converts to an internal, head-integrated PCV system
-
Utilizes precision-machined check valves for boost sealing
-
Fully reversible ā Block-offs or valves can be removed if needed
- No tapping is required. Easy install, by tapping the blocks or valve into place.
-
-
Sale!Quick View
B58 Turbocharger Install Kit
$209.99Original price was: $209.99.$188.99Current price is: $188.99. -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Modular BILLET CNC Valve Cover
$1,449.99VTT is proud to announce a ground-up system designed to give the end-user completeĀ control over their valve cover/ PCV set up. Tired of being told you will run two -10 lines from your VC to your Catch Can? So were we. Now you can run them any way you want, including complete VTA, oil cap one-way breather, etc. Nothing on the market comes close to the versatility of this setup, and it truly is the ULTIMATE Valve cover, PCV combo, or Valve cover, or PCV set up. You choose how many or how few you want to run. -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT B58 Gen 1 BILLET CNC Valve Cover
$1,449.99 – $1,879.99Price range: $1,449.99 through $1,879.99VTT B58 Gen 1 Billet Aluminum Valve Cover
Performance, Reliability, and Style for Your B58 Engine VTT is proud to release our Billet Aluminum Valve Cover for the B58 Gen 1 platform. Designed for B58 owners looking to enhance engine bay aesthetics while addressing the limitations of the factory plastic valve cover, this upgrade is a functional and visual game-changer. The OEM plastic cover is known to crack with age and mileage, and its built-in PCV system often causes issues. Our billet cover eliminates these problems and gives you full control over your PCV setup. We recommend pairing it with our B58 Catch Can Kit for maximum performance and crankcase pressure management. For additional crankcase venting, we offer multiple breather options, including a one-way stainless breather and our popular oil cap breather.
š§ Key Features:
- ā 100% CNC-Machined from 6061-T6 Aircraft-Grade Aluminum
- ā Available in a range of anodized color options
- ā Lightweight ā 9.7 lbs (vs. 7.9 lbs for OEM ā just a 1.8 lb difference)
- ā Fully baffled ports to minimize oil escape and maximize performance
- ā The only billet option currently available on the market for the B58 Gen 1
- ā Fully modular to suit any PCV configuration you want to run
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsWe have heard all the stories about fluid all over the engine bay, seen the headbands, socks, sweatbands, and all the fixes people have used and still have issues with their PS reservoir.Ā So we decided to do something about it, and started with a ground-up design that completely fixed all those issues, and added some much-needed features to an old BMW design. Kit Includes:- 1 PS Reservoir in choice of color
- 2 or 4 fittings
- 2 Hose clamps
- Optional One-Way Breather
-
Quick ViewVTT is proud to offer a truly plug-and-play line lock kit for select BMW vehicles that does NOT require running wiring inside the car, mounted switches, holes in the dash, etc. Our newly designed and released line lock kits use a 40amp wireless remote control switch with 4 different modes that allow you to tailor your line lock setup exactly as you prefer. You simply install the solenoids, install the harness with the switch which has all the wiring terminated, bleed the brakes, and you are ready for effortless burnouts which will not be interfered with by the DME because you are holding the brakes, nor wear your rear brake pads. You can store the remote anywhere in your vehicle, center console, cup holder, door cup holder, etc., and when you need to do a burnout to heat your race tires it's in arm's reach without running any wiring into the vehicle. Fitment is confirmed for G8X M3/4, A9X Supra - The kit itself including lines, solenoids, etc will fit most all late model BMW Chassis including F8X, F3X, G2X, etc. The main concern will be mounting the wireless switch in the passenger cowl area. The kit includes:
- Line lock solenoids with weather pack connectors
- Two Parker 90-degree -3 an fittings
- Two Stainless Steel adapter fittings
- Two DOT Approved Stainless Steel brake lines
- One complete wiring harness
- One Remote control switch with TWO remotes
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Billet BMW G8X Front Diff Bushing Reinforcement Insert Kit
$132.49 – $257.49Price range: $132.49 through $257.49Want to tighten up the diff on your 2021+ G8X M3/M4 and help eliminate any extra diff movement on hard launches? We got you covered with our Billet diff inserts. They are machined from 6061-T6, and anodized black for a long-lasting finish. They install easily by removing the diff bolts one at a time, inserting the bushing, and then retorquing each diff bolt. They are sold in 3 ways, front side only, rear side only, and Both front and rear side. Installing the Front side only requires less time, and labor, to install the rear, you must support the diff as you need to completely separate the flange from the supports Kit includes:- Optional 4 G8X Front Side Billet Diff bushing inserts
- Optional 4 G8X Rear Side Billet Diff bushing inserts
- Optional 4 12.9 M12 bolts, and hardened Washers
Please note: A slight increase in NVH may be noticed from this product as it stiffens up the rear end, and removes some of the sound dampening of the rubber bushings
DOES NOT INCLUDE DIFF BRACE IN PHOTOS!
-
Quick View
VTT 8V RS3 DSG Catch Can
$242.49VTT is proud to announce our 8V RS3 DSG catch can set up. Tired of DSG oil spewing all over your engine on hard launches? this kit will fix that issue at a low price and look great while doing it. What is happening is the fluid gets hot and expands there is a breather on top of the trans, and if the fluid expands enough it is pushed out of the breather up the tube, and out the vent onto your engine. This kit prevents that by allowing the fluid to be pushed up into the can while hot, and drain back into the trans once it cools down. As with our Engine catch can these use our already extremely popular modular catch can, and couples it with a custom CNC 6061 bracket, VTT -6AN to barbed fitting. Install is simple, takes about 15 minutes to an hour depending on your skill level, and requires removing the intake to gain easier access. This is the perfect complement to our RS3 engine side catch can, as they mirror each other in the engine bay. Kit Break down is as follows:- One Catch Can
- One CNC 6061 bracket
- One -6AN to barbed fitting
-
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewS55 Cold side “J” charge pipe
$121.12 – $161.49Price range: $121.12 through $161.49 -
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT Billet DUAL POINT G8X Diff Lockdown Kit
Serious traction starts here.
VTT is proud to introduce the Billet DUAL POINT G8X Diff Lockdown Kitāa must-have upgrade for high-performance G80 owners. The factory differential bushings are notoriously soft, allowing excessive diff movement that robs you of traction and stability.
As the G8X platform continues to push performance boundaries, the OEM components reveal their weaknesses. One major flaw? Significant differential deflection under hard launches, often resulting in broken rear bushingsāa growing issue in the community.
š” Our solution:
What BMW should have done from the startāa true DUAL-POINT Lockdown System that secures the differential at four key locations:-
Precision CNC-machined billet pucks at the lower differential mounts
-
Matching billet pucks at both secondary subframe points
This setup locks the diff down completely, eliminating unwanted movement and dramatically improving stability under launch and aggressive driving.
š ļø Easy Installation:
No subframe or diff removal required! Just drop the exhaust and heat shielding for access. A straightforward, no-hassle install.ā ļø PLEASE NOTE:
NVH Disclaimer:
All products designed to stiffen or reduce drivetrain movement inherently have the potential to increase NVHāNoise, Vibration, and Harshness. While these bushing inserts typically add minimal NVH, results may vary depending on your vehicle and personal sensitivity. This product was specifically engineered to minimize drivetrain movement. Returns due to NVH will not be accepted once the product has been installed.Exhaust Clearance Notice:
This product may require exhaust system modifications. Depending on your exhaust brand, fitment, and layout, adjustments may range from minor to significant.-
VTT is not responsible for any necessary exhaust modifications.
-
Vehicles using the stock G8X exhaust will almost certainly require modification.
Returns due to exhaust clearance issues will not be accepted once installed.
-
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLooking to adapt your wheel bore size to a smaller hub bore? VTT has you covered with our hub-centric adapters. These adapters are made from Billet 6061-T6 aluminum, and anodized in black. We have these sizes currently- 57.1mm hub to 60.1mm wheel bore
- 57.1mm hub to 64.1mm wheel bore
- 57.1mm hub to 66.1mm wheel bore
- 57.1mm hub to 66.6mm wheel bore
- 57.1mm hub to 67.1mm wheel bore
- 57.1mm hub to 70.3mm wheel bore
- 57.1mm hub to 71.6mm wheel bore
- 57.1mm hub to 72.6mm wheel bore
- 57.1mm hub to 73mm wheel bore
- 57.1mm hub to 74mm wheel bore
- 57.1mm hub to 74.1mm wheel bore
- 64.1mm hub to 72.6mm wheel bore
- 66.6mm hub to 72.6mm wheel bore
They are sold in sets of two, order TWO SETS for a full car, or one set per axle.
-
Quick ViewThe Factory B58 TU water neck is plastic and is right in the path of your charge pipe if you lose a connection and it blows off. If this does happen to you it can break the plastic neck emptying your coolant in seconds causing you in the best-case scenario to be stranded, and in the worst-case scenario expensive engine damage. Add some cheap insurance with our Billet Water neck.
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT is proud to offer high-performance drop-in replacement filters for the 2021+ G8X M3/M4. These filters are custom-made for VTT. They are made with a heat-resistant silicone base, a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. On the dyno, we saw more than 13WHP gains with these filters and our Carbon Fiber intake Tops. These filters will also work perfectly with the stock tops. We recommend removing the pre-filter for best flow if the stock top is used. We offer them in two colors. Red, and Black
Features:- 50 States Emissions Legal
- Easy to install 15-30 minutes even for a novice
- Filters can be cleaned forever meaning never buy new filters
- Up to 13WHP gains
- Completely reversible if you ever want to remove
Fitment: 2021+ BMW
- G80 M3
- G82 M4
- G83 M4 Convertible
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT G20/G21/G22/G23 BMW Modular Silicone Intake System
$127.49 – $669.99Price range: $127.49 through $669.99VTT Modular Silicone/Billet Intake System ā BMW G2/3/4X B58TU
VTT is proud to announce our Modular Silicone/Billet Intake System for the BMW G2/3/4X platforms equipped with the B58TU engine.
After extensive testing and countless hours of fitting, weāve created an intake system that delivers both optimized airflow and factory-level fitment.
Why Upgrade?
The factory BMW airbox itself performs well, but the intake tract down to the turbo is full of twists, turns, bellows, and even a built-in silencer that restricts flow and robs power. Our system eliminates these bottlenecks and replaces them with a 3"ā3.5" free-flowing silicone intake tube, paired with either:
-
The stock airbox (for OEM appearance and sound), or
-
Our 6" high-flow cone filter with integrated velocity stack (for maximum airflow and sound).
From testing, weāve confirmed the stock airbox is capable of supporting up to 700WHP. Beyond that, we recommend stepping up to the 6" cone filter system.
-
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT/VAG TITANIUM 5×112 to 5×114 Bolt Pattern Conversion Kits
$199.99 – $389.99Price range: $199.99 through $389.99Looking to convert your 5x112 M14x1.50 VAG vehicle to 5x114 to open up your wheel options? Want to drop 60% of the weight off steel options? We got covered with our VTT TITANIUM wheel stud conversion kits. These kits are Grade 5 Titanium studs, rated at more than 135,000PSI Tensile Strength, with Grade 5 Titanium nuts with 60-degree cone seat to fit most all aftermarket wheel applications and convert your vehicle to M12x1.5 wheel studs which allow you to fit 5x114 wheels with no other changes.PLEASE NOTE ā DO NOT USE ANY HUB CENTERING SLEEVES WITH THESE CONVERSION STUDS, THE LUGS WILL CENTER THE WHEELS. THE USE OF A CENTERING SLEEVE MAY LEAD TO STUDS BREAKING. FOR INSTALLATION YOU MUST SNUG EACH LUB UP SLOWLY, AND IN A STAR PATTERN TO GET THE WHEEL CENTERED ON THE LUGS, FAILURE TO DO SO CAN ALSO LEAD TO FAILURE.
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT BMW S58 Billet Oil Cap
$59.99 -
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT Billet & Forged Carbon G8X M3/M4 Strut Bar Upgrade
BMWās G8X M3 and M4 platforms are exceptional in nearly every way, but the factory strut bars fall short. The OEM stamped steel design lacks both strength and visual appeal ā an afterthought in an otherwise perfectly executed engine bay.
At VTT, we set out to change that. Building on our popular billet aluminum strut bar system, weāve taken it to the next level with genuine forged carbon fiber center sections ā not metal wrapped in carbon-look overlay. This is the real thing.
Key Features
-
True Billet & Forged Carbon Construction ā Combines CNC-machined billet aluminum ends with genuine forged carbon fiber center sections.
-
No Overlay or Fake Carbon ā 100% real forged carbon fiber; no stamped metal, no glued-on veneer.
-
Precision CNC-Machined Ends ā Made from 6061-T6 aluminum and anodized in your choice of Black, Red, or Clear for a premium and durable finish.
-
Functional 3-Piece Design ā Interlocking structure with a central support that enhances rigidity and overall chassis response.
-
Direct Replacement ā Installs using factory mounting points and hardware. No modifications required.
-
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT/FF N54 Intake Manifold
$1,399.99THE FAB FACTORY MANIFOLD IS BACK at VTT!
Ā -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Mini Billet Check Valves
$5.99 – $11.99Price range: $5.99 through $11.99 -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB Turbo Head Flanges
$189.99 – $524.99Price range: $189.99 through $524.99Looking to build your own turbo manifold and need a solid head flange? Look no further, VTT-FAB turbo head flanges are made from 304SS 1/2" thick, and either CNC machined or wire cut for the ultimate in consistency, clean cuts, and perfect weldability. We have them in all the popular BMW head styles and are always adding more. If you have a special need and can provide a sample or a drawing we can make you a flange.Ā -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT N54 Stock Style Coil Hold Down Kit
$112.49 – $169.99Price range: $112.49 through $169.99Tire of sloppy coil placement with your stock N54 VC? Upgraded to a VTT Cast or Billet VC, and want to run the stock style coils, while positively securing the coils to the plug? We got you covered with our N54 stock style coil hold-down bracket. This kit uses our N54 to B58 coil conversion bracket, with 6 billet S brackets to securely hold your stock style coils in place. This will eliminate any possible misfire issues from coils being raised off the plug, etc. It also looks badass, and can be ordered in all colors to match your existing setup, including Carbon Fiber! -
Quick ViewImprove engine/shifting feel without a huge increase in NVH or high cost! VTT A9X billet motor mount inserts upgrade mounts the way BMW does it, allowing a minimal increase in NVH while stiffening up the engine/shifting feel, and getting rid of excessive engine movement
-
Quick ViewWant to tighten up the diff on your 2021+ G8X M3/M4, A9X Supra, G42 2 Series, or G2X BMW and help eliminate any extra diff movement on hard launches? We got you covered with our Rear Billet diff insert kit. This is pressed into the factory bushing and fills the voids in the bushing. This keeps the stock bushing ride compliance but removes any unwanted movement. These are sold as a kit. To install remove the rear diff bushing, use the stock bolt in press the bushing in, and then replace it with the new bolt washer, and lock nut! Kit includes:
- One Billet Bushing insert
- Two 46mm Hardened Steel Washers
- One 12.9 M14 Bolt
- One M14 Lock nut
THIS KIT MAY REQUIRE LOWERING OF THE SUBFRAME TO GET THE STOCK BOLT OUT, AND THE NEW ONEĀ IN
Please note: A slight increase in NVH may be noticed from this product as it stiffens up the rear end, and removes some of the sound dampening of the rubber bushingsDOES NOT INCLUDE DIFF BUSHING IN PHOTO!
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT BMW S58 G8X M3/M4 – F9X X3M/X4M “GC” Turbocharger Upgrade
$4,409.99 – $4,829.99Price range: $4,409.99 through $4,829.99VTT S58 āGCā / āGC+ā Turbocharger Upgrades
Wheel Sizes / Power Support (Precision style designation)
Model Wheel Size (Comp / Turb) Stock Engine Power Range GC (G25-550 spec) 58/52 Up to 800WHP GC+ (G25-660 spec) 67/54 Up to 950WHP
Ready to take your BMW G8X M3/M4 or F9X X3M/X4M to the next levelāwithout core charges, long lead times, or restrictive factory housings? Look no further. The VTT S58 GC Series turbochargers deliver massive power potential while keeping factory spool characteristics and OE fitment.
We keep what BMW got right, then remove every limitation we identified: restrictive inlets, inefficient bearing housing oiling structure, weak thrust assembly, and everything else bottlenecking S58 power output. We then apply proprietary VTT revisions and cast our housings at OEM-level quality.
The result: true bolt-on S58 turbos that support 800ā950WHP, retain all factory oil/water/downpipe/charge pipe connections, and are proven record-settersāholding the G8X ET + Trap Speed records as of 7/24/22.
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Cummins 6.7L (2007-2020) BILLET CNC Valve Cover
$524.99 – $649.99Price range: $524.99 through $649.99VTT is proud to announce our 2013-2018 6.7L Cummins Billet Valve Cover. We created these for the Cummins owner who wants to get rid of their crankcase filter, and plastic VC, while giving you a variety of ways to run your crankcase ventilation. The gas chamber comes with SSS mesh to knock down any oil droplets before it gets to the turbo inlet if you choose to run stock routing. You can also rotate the gas chamber 90 degrees, and run a hose down under the truck, or you can run this with our Billet catch can, for the ultimate in keeping oil out of your turbo inlet, and out of your engine. This upgraded billet VC also adds some nice color, and pop to their engine bay. These come in 3 colors Red, Black, and Clear, Anodize, as well as custom colors, are available (3-4 weeks for a customer color $200 upcharge) -
Sale!Quick View
VTT A90/91 Supra Carbon Fiber Driveshaft
$1,999.99Original price was: $1,999.99.$1,699.99Current price is: $1,699.99.THE DRIVESHAFT for the MK5 Supra!
Why overpay for a carbon fiber MK5 Supra driveshaft?
VTT is proud to offer a premium carbon fiber driveshaft manufactured exclusively for VTT in the USA by GCDS (Gulf Coast Driveshaft) ā one of the premier driveshaft manufacturers in the country with extensive experience in high-performance and drag racing applications.
Each driveshaft is constructed using 3.25" carbon fiber tubing, paired with NEAPCO Performance 1350 series U-joints, then bonded using a proprietary high-strength process and precision balanced to within 1/8 in-oz as a complete assembly.
Every shaft is torque tested in-house prior to shipping to ensure proper bonding and structural integrity. GCDS and VTT are among the few manufacturers that perform full torque testing on each shaft before it leaves the facility.
To complete the system, the driveshaft is paired with VTT-designed 7075 aluminum adapters, eliminating the factory guibos and unnecessary flex points. The shaft connects directly to the BMW 3-bolt front flange, while a VTT 4340 rear adapter replaces the factory slip-in / screw-retained shaft design for improved strength and reliability.
Proudly Made in the USA.
PLEASE NOTE! Driveshafts can have UNUSUALLY LONG LEAD TIMES. We hope to reduce this with GCDS, but if the shaft shows OUT OF STOCK, expect a lead time of 4ā8 weeks, unless we specifically state that it can ship sooner.
Due to the nature of these shafts being manufactured by a 3rd party, ANY ORDERS PLACED FOR VTT CF DRIVESHAFTS ARE 100% FINAL.
NO REFUNDS. NO CANCELLATIONS. FOR ANY REASON.
THIS INCLUDES LONG LEAD TIMES.
PLEASE ORDER CAREFULLY. ONCE THE ORDER IS PLACED, IT IS FINAL.
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT Billet G8X M3/M4 Strut Bar Upgrade
While BMW did an excellent job designing the G8X M3 and M4 platforms, the factory strut bars leave a lot to be desired. The OEM setup uses stamped steel components with no visual appeal, giving the impression of an afterthought in an otherwise well-executed engine bay.
At VTT, we decided to change that. Our engineering team developed a replacement system that combines form and function ā turning a simple structural component into a centerpiece of precision design.
Key Features
-
True 3-Piece Interlocking Design ā Replaces the factory single āVā bar and strut bar with an interlocking billet setup that ties both sides together with an additional center support for improved rigidity.
-
CNC-Machined from 6061-T6 Aluminum ā Precision-machined for perfect fitment and strength.
-
Anodized Finish Options ā Available in Black, Red, or Clear for long-lasting corrosion resistance and a premium look.
-
Direct Replacement ā Designed to bolt directly in place of the factory components using OEM hardware. No modifications required.
-
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT External PCV Adapter fitting
$104.99 – $137.49Price range: $104.99 through $137.49Adapter fitting that is required to convert your N54 to external PCV if you want to keep your crankcase under vacuum at idle, and anytime you have a vacuum condition in your intake manifold. -
Quick ViewLooking to make you Rs3/TTRS/MK7R faster in the 1/4 mile or 1/2 mile racing? Want to run 15" wheels, and slicks in the rear? Want to drop close to 20lbs of weight off the rear of the car at the same time? Do not want to break the bank while doing so? Look no further than the VTT Ultimate Rear Drag kit for the Rs3/TTRS/MK7R. This kit will allow you to run the wheel/tire combo you need to drop your ET's all while putting the car on a significant diet over the stock rear brake set up. The kit is a true plug and play set up using Genuine Audi Calipers, coupled with StopTech Slotted rotor, and CEL eliminator harness for the brake sensor. This kit also keeps your factory Electronic E-brake for burnouts.
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewN63/N63TU – S63/S63TU Stage 1 TurboCharger Upgrade
$3,309.99 – $4,409.99Price range: $3,309.99 through $4,409.99WHP Level supported (with proper fuel, upgrades, and tuning) Stock-800WHP We are proud to introduce the first in our line of N63/N63TU - S63/S63TU turbocharger products the VTT Stage 1 hybrid turbochargers. If you are ready to take your N/S63-powered vehicle to the next level, this is the upgrade for you. We start with a fresh rebuild using all factory spec internals, then we machine the stock compressor housings to take our own custom-sized VTT billet compressor wheels, these wheels can support up to 800WHP with the proper tuning and fuel. We then triple balance the wheels, CHRA, and assemble them into the freshly prepared housings. Please select your model -
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT is proud to offer our Billet Aluminum ZF8HP Transmission Pan ā the ultimate upgrade over the factory plastic or cast aluminum pans.
CNC-machined from 6061-T6 aluminum and anodized in multiple colors, this pan adds durability, serviceability, and performance benefits. With 2 extra quarts of fluid capacity, built-in cooling features, and premium sealing, itās designed for both daily drivers and high-performance builds.
Key Features
-
6061-T6 Billet Construction ā Stronger, longer-lasting, and precision-machined.
-
Increased Fluid Capacity ā 5.7 QTs (5450ML) vs. the stock 3.7 QTs (3500ML).
-
Improved Cooling ā Machined external fins aid heat dissipation.
-
Integrated Magnet ā Rare-earth magnet supports the filter while pulling metal debris from the fluid.
-
Premium Seal ā Reusable US-made Viton gasket for a leak-free seal.
-
Easy Service ā -6 ORB magnetic drain plug for quick, clean fluid changes.
-
Anodized Finish ā Corrosion-resistant and available in multiple colors.
-
-
Sale!Quick View
VTT Aluminum Outlet & Inlet Bundle Package
$592.48 – $602.48Price range: $592.48 through $602.48Original price was: $592.48 – $602.48Price range: $592.48 through $602.48.$503.61 – $512.11Price range: $503.61 through $512.11Current price is: $503.61 – $512.11Price range: $503.61 through $512.11.Save 15% on your VTT Silicone inlets, and aluminum outlets if you order them together! -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT FAB Turbo/Downpipe Flanges
$21.99 – $64.99Price range: $21.99 through $64.99 -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT BMW F9X M5/ M8 “GC” / “GC+”Turbocharger Upgrade
$5,499.99 – $6,299.99Price range: $5,499.99 through $6,299.99VTT "GC" and "GC+" Turbocharger Upgrade ā BMW F90 M5 & F91-93 M8
GC Supported Power Level: Stock ā 1000WHP
GC+ Supported Power Level: Stock ā 1200+ WHP
Wheel / Frame Sizing (PTE Equivalent Reference)
Model Garrett Base Spec PTE Style Wheel Designation GC G25-660 58/54 equivalent GC+ G30-900 62/62 equivalent
Unleash Maximum Performance
Ready to take your BMW F90 M5 or F91-93 M8 to the next level? Skip the core charges, long lead times, and restrictive factory housingsāVTT has you covered with our 100% newly cast "GC" and "GC+" turbocharger upgrades.
We preserve what BMW did correctly, while eliminating every OEM limitation: small inlet restriction, inefficient bearing housing oiling, undersized thrust structure, and anything else holding the platform back. Then we incorporate proprietary VTT enhancements and cast all components to OE quality standards.
The result is a true drop-in turbocharger solution capable of delivering 900ā1000WHP with the GC, and 1200+ WHP with the GC+, while maintaining near factory spool and full compatibility with OEM oil, water, downpipe, and charge pipe connections.
WE HIGHLY RECOMMEND ADDING the BOV KIT! This will increase turbo longevity!
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT DAZA/DNWA GC/GC+ Turbocharger
$2,329.99 – $3,829.99Price range: $2,329.99 through $3,829.99VTT Is proud to introduce the GC and GC+ line of turbochargers for the DAZA, and DNWA 2.5L Audi engines.These units are a white sheet design based around the factory turbocharger footprint while removing all the factory restrictions left when people stuff larger wheels into factory housings., AKA "Hybrid" These turbos are priced outright meaning no core charges. Keep your factory turbo in case you ever need to go back to stock, sell it to recoup some of your investment, etc. This also means no downtime, once we have the units on the shelf, you order -> We ship... -
Quick ViewWant to tighten up the diff on your A9X Supra, G42 2 series, or G2X BMW and help eliminate any extra diff movement on hard launches or cornering? We got you covered with our Billet diff inserts. They are machined from 6061-T6, and anodized black for a long-lasting finish. They install easily by removing the diff bolts one at a time, lowering the diff slightly, inserting the bushing, and installing new washers, and bolts. Kit includes:
- 2 Front inserts
- 2 Rear inserts
- 2 Hardened 46mm washers
- 2 110mm M12x1.5 Bolts
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT S65 E9X M3 Billet/Silicone Coolant Hose Upgrade
$74.99 – $524.99Price range: $74.99 through $524.99VTT is proud to announce our S65 Billet/Silicone coolant hose upgrade kit! This is the ONLY complete kit on the market that replaces not only the hoses but ALSO the brittle factory plastic coolant connectors that are prone to breaking over time. We wanted to provide an upgrade to both areas. What we came up with is Billet 6061-T6 connectors anodized black for corrosion resistance, and 6-ply silicone molded silicone hoses in the factory shapes. These hoses are direct plug, and play, and require no changes. Upgrade your cooling and your engine bay at the same time! Fitment is as follows:- All S65 Models
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe Factory B58 TU Upper Cylinder head hose is plastic and is right in the path of your charge pipe if you lose a connection and it blows off. If this does happen to you it can break the plastic neck emptying your coolant in seconds causing you in the best-case scenario to be stranded, and in the worst-case scenario expensive engine damage. Add some cheap insurance with our Billet Upper Cylinder head hose, this sits right above the plastic water neck. Product Details:- Plug and play direct factory replacement
- 6061-T6 Billet aluminum with black anodizing for a corrosion-free life
- 7-Ply Silicone in 3 colors
- Cheap insurance against a blown charge pipe which could turn into a blown motor
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT F-Series BMW B58 MODULAR Carbon Fiber Intake System
$157.49 – $669.99Price range: $157.49 through $669.99VTT is proud to announce another product in our carbon fiber product line. The BMW F-Series B58 Modular Carbon fiber intakes system! We COMPLETELY do away with the entire factory intake tract, including the accordion hose, the turbo muffler, all of the restrictive bends. We then replaced it with a smooth radius 2.5"-4" Silicone intake pipe with wire impregnated to ensure strength and longevity. This is coupled with our billet intake connection for an OEM-like fit, and finish. We then created a 100% carbon factory-style intake top and coupled it with our high-flow cotton pre-oiled filters. These tops are 8 layers of 100% carbon, not a single layer wrapped over plastic and they are 1.3MM thick with our logo vacuum printed onto the tops, with a UV resistant gloss clear coating. This is not only strong but will resist discoloration for an extended period of time. The filters themselves are made with a heat-resistant silicone base, a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. But we didn't stop there! For the crowd looking for increased intake sound, we also made this compatible with our 4" Cone filter for increased flow, and much louder intake sound! Filters are available by themselves for a flow upgrade while keeping the stock look here -Ā https://vargasturbo.com/product/vtt-f-series-bmw-b58-high-performance-drop-in-air-filter-upgrade/ Features:- Completly modular, can switch from Carbon top to Cone filter all using our silicone intake tube
- 50 States Emissions Legal (Carbon fiber top kit only. The Cone filter option is legal for racing use only in California. Always follow all local emissions rules)
- Easy to install 15-30 minutes even for a novice
- A Beautiful Carbon Fiber finish really adds class to the B58 engine bay
- Filters can be cleaned forever meaning never buy new filters
- Completely removes the restrictive stock intake pipe, NOT only the turbo muffler elbow
- Completely reversible if you ever want to remove
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB Extension Harnesses
$49.99 – $104.99Price range: $49.99 through $104.99Need to move your coolant expansion tank to the other side of the vehicle for a single turbo kit you are building, extend Map sensor plugs, or IAT, how about Throttle Body? Don't cut your factory wires. Just get a VTT-FAB extension harness, and plug and play! These come in various lengths and are covered in expanded sheathing with heat shrink on both ends for a long-lasting, good-looking finish. Available:- Coolant Extension for late model BMW 2015+ 5 ft
- Pre-Throttle Map sensor extension harness 2 ft
- Pre-Throttle IAT Sensor extension harness 2 ft
- B58/S58/B48 etc Throttle body extension harness 2 ft
- B58 to S55 Throttle conversion/extension harness 2 ft
- EWG Actuator Extension harness, Various Lengths
- N54 stock MAP to N20 Map sensor extension
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewPFS G8X/F97/98 S58 BMW Drop in Brushless LPFP upgrade (1000WHP+ Capable)
$1,549.99 – $1,769.99Price range: $1,549.99 through $1,769.99PFS is proud to offer a true drop-in 1000WHP+ capable LPFP for G -Series s58, and the F9X X3/4M. This LPFP needs NO additional pumps, wiring harnesses, etc etc. It will support up to 800WHP on Ethanol percentages as high as E98 and will support much higher power levels with less E content as long as you have the octane to support it. For the pump, we start with a factory bucket, we modify it extensively to accept our custom PFS Brushless fuel pump. We then re-terminate the factory wiring to accept the new pump. No wiring splices, done the same way the factory does -the right way.PLEASE NOTE, X3/4M USES A DIFFERENT TOP HAT FOR PRE-LCI, AND LCI. WE HAVE NEW PRE-LCI BUILDS IN STOCK, LCI NEEDS TO SEND YOUR CORE FIRST FOR US TO UPGRADE. CURRENTLY, WE ARE WAITING ON G8X CORES, AND ARE ONLY BUILDING YOUR CORES WITH A 1-3 DAY TURNAROUND.
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT MK7/MQB Ultimate Front Drag Brake Kit
$1,339.99 – $1,949.99Price range: $1,339.99 through $1,949.99Looking to make your MK7 GTi, Golf R, Jetta, etc, faster in the 1/4 mile or 1/2 mile racing? Want to run 15" wheels, and slicks in the front? Want to drop 55 lbs of weight off the front of the car at the same time? Do not want to break the bank while doing so? Look no further than the VTT Ultimake Front Drag kit for the MK7 platforms. This kit will allow you to run the wheel/tire combo you need to drop your ETs all while putting the car on a significant diet over the stock front brake setup. The kit is a true plug-and-play setup using VTT parts, coupled with DOT-approved brake lines, CNC rotor hats/brackets, and a CEL eliminator harness for the brake sensor. This kit comes in 1 variation in 2 different caliper sizes -
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT S55/N55 EWG Cast Aluminum Valve Cover
VTT is proud to introduce our S55/N55 EWG Cast Aluminum Valve Cover, designed for performance-driven BMW owners looking for a durable, stylish, and functional upgrade. This option provides a cost-effective alternative to our billet valve cover while still delivering enhanced engine bay aesthetics and eliminating the failure-prone factory plastic cover, which can crack over time.
Beyond durability, this valve cover removes the problematic factory PCV system, giving you complete control over how you set up your PCV. We highly recommend pairing it with a catch can for optimal performance. Additionally, this cover is perfect for single turbo conversions, offering increased clearance and improved heat resistance.
-
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB S55 Factory Control EWG Top Mount Single Turbo kit
$4,913.99 – $7,550.99Price range: $4,913.99 through $7,550.99VTT-FAB is proud to offer the premiere top-mount single turbo kit for the F8X S55 platform. This kit is 100% made in the USA at our Hayward, CA facility, and only uses top-of-the-line components. We start with 321 Stainless materials as well as Billet flanges to create a high flowing, and long-lasting manifold. We couple this with our revolutionary factory-controlled external gate system using a Turbosmart 60mm Straight gate. This gives you COMPLETE control of an external wastegate with your factory ECU tune. This means no external boxes to control boost, no mac solenoids, and no vacuum/boost lines. Simply reuse your factory actuator on our adapter, and you have the best flowing, and easiest-to-control system on the market with a true boost range of 0 psi, to whatever your turbo of choice can make.We are currently taking orders for kits with a 6-8 week build time, NOT including coating time if chosen
Features:- Fully Fabbed in-house in Hayward Ca using US-sourced parts
- The ONLY top mount kit on the market that clears the factory strut bar
- All Tig Welded
- VTT-FAB 6 into Cast Collector
- Fully set up for our VTT-FAB factory-controlled turbo smart straight gate. Making this plug-and-play with your existing tuner
- 321 Stainless Weld Els for the ultimate in heat resistance and durability
- 1.25" Primary for lightening spool, and high exhaust gas velocity
- NO external boost control needed
- That AMAZING 6 into 1 turbo sound that divided housings just dont give you
- The charge pipe is flanged for a Turbosmart or Tial BOV
- Single charge pipe available for Wagner single inlet charge cooler
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewA90/91 Supra / G – Series BMW “GC” Front Drag Brake Kit
$1,289.99 – $1,949.99Price range: $1,289.99 through $1,949.99VTT āGCā Front Drag Kit ā A90/91 Toyota Supra / G Series BMW
Looking to make your A90/91 Supra faster in the Ā¼ mile or Ā½ mile? Want to run 17ā wheels (or even 15ā with suspension modifications) and front skinnies? How about shedding nearly 70 lbs of unsprung weight from the front of the car ā without breaking the bank?
Look no further than the VTT āGCā Front Drag Kit. This kit is designed specifically for drag racing, giving you the wheel/tire setup you need to drop ETs while putting your Supra on a serious diet compared to the heavy OEM front brakes.
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Billet BMW N54/N55/S55/B58 “HEAD HANDLER” Cylinder head lifting tool
$69.99 – $89.99Price range: $69.99 through $89.99Do you work on a lot of BMW engines from various platforms? Do you ever struggle with heavy cylinder heads, either lifting off the engine or simply moving around? Ever ruined an EXPENSIVE multi-layer head gasket while trying to install a cylinder head due to no secure way to hold it without two people. We answered yes to all of those things, and came up with a tool for anyone that works on BMWs often, and needs a way to simply, and easily remove/install, or simply move around a cylinder head. These cylinder head tools are machined from a solid billet of 6061-T6 aluminum and anodized in 4 colors for long-lasting corrosion resistance. They are knurled for non-slip grip when oily or wet, and positioned so the head is balanced when lifting The Head Handler fits the following engines, N54, N55, S55, B58 and we offer short extensions for installation with no cams/Cam ledges on the head, or long extensions for people that want to install or remove a head with cams still installed. (B58 only requires short extensions) -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick View
VTT A90/91 Supra Modular Silicone Intake System
$127.49 – $669.99Price range: $127.49 through $669.99 -
Quick ViewVTT is proud to announce our A90/91 Supra engine catch can set up. This kit uses our already extremely popular modular catch can, and couples it with a custom CNC 6061 bracket, VTT CNC banjo fittings, VTT 5 ply silicone hose, and Push lock fittings. Install is simple, takes about 30 minutes to 2 hours depending on your skill level, and requires removing one factory hose to install the VTT hoses. Giving an OEM fit and finished when installed This catch can fits all known intake variations we have seen, including stock intake. Kit Break down is as follows:
- One Catch Can
- One CNC 6061 bracket
- Two -10 Low Profile CNC Banjo Fittings
- Two -10 VTT 5-Ply silicone Vacuum hoses
- Two -10 Push Lock Fittings
- Two spring clamps
- Available with an optional Drain fitting, allowing quick draining
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewCNC N54/N55 Single Flange
$329.99 – $409.99Price range: $329.99 through $409.99100% CNC flange in mild or SS. This flange will fit all N54's and N55's and comes COMPLETE ready for welding your runners onto it -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT BMW Plug and Play Pre AND Post throttle 5-Bar (58 psi), 6-Bar(72 psi) Map Sensor Kits
$177.49 – $209.99Price range: $177.49 through $209.99Looking to up your boost limit on just about any BMW vehicle that runs a 3 or 4-wire BMW map sensor including but not limited to S58, B58, N54, N55, S55, S63, B48, B47, B42, B57, B46? We were too, so we decided to make a very easy plug-and-play kit for 3, and 4-wire BMW map sensors. These kits will allow you to completely replace the 3-wire sensor with one of our sensors, leave your stock 4-wire in place for IAT sensing, and move the power, ground, and sensor signal from the factory sensor to our sensor. These sensors have the proper scaling which will allow your tuner to simply change your map sensor scaling in the tune, and the factory ECU will be able to utilize the sensor voltage with no problem. We are offering these in 5 bar (58 psi), and 6 bar (72 psi), and each comes with a plug-and-play harness, and optional fittings for ease of installation.Note: For the S58/B58 our Factory style Pre-Throttle map sensor is also 5 bar, and will work fine coupled with the post throttle kit, but the scaling is different, if you want matching Voltages Pre/Post throttle you can run two of these.
A variety of install pics can be found below and - Here
Scaling PDF Links: 5-Bar / 6-Bar
Features include:- Plug and Play harnesses with no wire splicing
- Output wire for connecting a PI or external controller to your post-throttle map sensor for the most stable signal that is not affected by throttle closure
- Different fittings are available for your plumbing needs.
- Can have matching voltage signals for pre/post throttle for ease of tuning, and boost reference
- B58/S58 etc Pre Throttle - 3 Wire Harness (Charge pipe to 1/8" NPT adapter needed, for B58/S58 90 degree adapter needed to provide sensor clearance)
- B58/S58 Post Throttle - 4 Wire Harness (Boost reference will be needed from manifold to sensor)
- F90 M5 Pre/PostĀ Throttle - 4 Wire Harness (May need to repin) (Boost reference will be needed from manifold to sensor)
- Most all other platforms Pre/Post Throttle - 4 Wire Harness (May need to repin) (Boost reference will be needed from manifold to sensor)
- B58
- S58
- S63/ S63TU
- N63
- N54
- S55
- N55
- N20
- B46
- B48
- B57
- B47
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT is proud to offer our billet replacement for the factory plastic Oil filter housing cap. This cap does away with the weak plastic cap, and the need for a special tool for removal, while adding some pop, and color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. We also designed these caps to complement our Power Steering reservoirs We offer these caps in 5 colors - Red, Black, Blue, Gold, and Clear anodized The cap retains the factory hex for easy installation, and removal, and includes a new sealing O-ring Fitment includes All S65 models -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB 304SS Turbo Collectors
$189.99 – $474.99Price range: $189.99 through $474.99VTT-FAB High-Flow Turbo Collectors
Looking for the highest-flowing collectors on the market to build your custom turbo kit? Donāt want to waste time fabricating your own? VTT-FAB has you covered with our precision Cast and Billet 304SS Turbo Collectors.
We offer multiple configurations and flange stylesājust choose your setup from the dropdown and start fabbing.
-
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT S65 BILLET CNC Valve Cover Set
$1,579.99Original price was: $1,579.99.$1,342.99Current price is: $1,342.99.VTT is proud to announce our S65 Billet Valve cover set. We created these for the S65 owner who wants to add a great look to their engine bay while also getting rid of the stock valve cover which are very problematic and can crack/leak/delaminate with higher mileage. We started from scratch on these and made them the RIGHT way. We did this by getting rid of the leak-prone factory oil cap design with a threaded cap with O-ring Seal, we also added two -10 ORB bungs which allow you complete freedom to plumb in a catch can, or vent system of your choice. The internal baffling is 100% in place to knock down any oil from the vapors before being expelled! We ALSO kept the factory PCV in place. You can run these in ANY number of ways. Valve Cover Details:- 100% CNC 6061-T6 Aircraft aluminum construction
- Anodized in a variety of colors
- Lightweight; 9.7 lbs. (compared to 7.9 lbs for a stock cover - only 1.8 lbs difference)
- TWO shrouded -10 ORB ports which Give the end-user varietyĀ for setting up their Valve Cover and PCV System
- Only Billet option on the market with a threaded oil cap, and PCV choices
- Available with Titanium, steel, does NOT work with stock hardware
- Works with our 1" one-way breather for ultimate crankcase venting
- Two Billet Valve covers
- Two US-sourced Viton Gaskets
- Choice of Various breather options, PCV block-off, etc
- Choice of hardware (optional)
-
Quick ViewOut of stockWith the VTT COMPLETE Catch can set up, we completely address the low AND high sides, by separating them, and running each side into its own chamber in the catch can. We do this using a custom PCV plate, that organizes the HIGH and LOW sides into nice short hose runs and uses strategically placed check valves to keep boost out of your crankcase, and in the manifold where it belongs. Our opening in the PCV plate is baffled, and the plate chambers themselves are filled with Stainless mesh to knock down any oil mist, and the catch can is also filled with this mesh. This means any oil is knocked out of the air BEFORE it gets to your intake ports or turbocharger inlet. We completely redesigned what people think of then they see an MQB catch can set up. VOLUME in the PCV system is just as important as the vacuum itself. Every set on the market runs lines across the ENTIRE engine bay, this long run, mean vacuum drop, and volume loss, this equals poor PCV operation. Our system mounts the can directly over the cold side of the turbocharger against the firewall, and the longest hose run is only a little over 9". We also use all custom CNC aluminum Banjo fittings, and Banjo Bolts, even our check valves are custom fitted into banjo Fittings. The -6 Banjo that pulls vacuum for the low side also serves as a place to run a boost tap if wanted. This makes it easy to run a boost reference for BOV, Boost gauge, 1:1 FPR reference, etc.
-
Sale!Out of stockQuick View
VTT A90/91 Supra 4130 Chromoly Driveshaft
$1,439.99Original price was: $1,439.99.$1,223.99Current price is: $1,223.99.VTT Is proud to offer a seamless Chromoly Driveshaft for the A90/91 Supra. This driveshaft is made from seamless 4130 Chromoly steel and forged 4130 weld ends, and Spicer 1350 Yolks, and U-Joints. All pieces are then precision tig welded, and balanced. We couple the driveshaft with VTT Custom 7075 aluminum adapters which convert the 3 bolt BMW bolt pattern to the 4 bolt Spicer yolk patter. This driveshaft is rated at 4100 ft/lbs of Tq, and more than 10,000RPM. -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Brake Kits Rotors/Hats only
$117.49 – $262.49Price range: $117.49 through $262.49This is for those running our brake kits that use our 11.75" or 13" Rotors that want to easily change between rotors for dedicated drag racing and street use. You can now buy Rotor/Hat Assemblies by themselves to switch between any of our 3 optionsThe price is for ONE ROTOR / OR ONE ROTOR/HAT ASSEMBLY
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Audi 2.5TSFI Modular External PCV Plate
$242.49 – $819.99Price range: $242.49 through $819.99Modifying your Audi 2.5TSFI engine for more power, want to get rid of the problematic PCV set up which is hard to modify, and pulls oil from the crank into the combustion chamber via ports on the cylinder head? Using this plate will close off the factory PCV ports, and allow you to run an external PCV set up of your choice. We made the plate modular so you can use any of our myriad of fittings we already offer for popular BMW PCV systems, and catch cans. Go from mild to wild, and anywhere in between using our fittings, vacuum relieves, and check valves. We also offer complete kits with catch cans, and all hoses, and fittings for a plug, and play system to fully convert your Audi external PCV. -
Quick ViewHeat is the enemy of power, and the last thing you want is hot coolant heating your charge air even further right before it enters the charge cooler, but this is what BMW has done on the S58. This is done for emissions and quick warm-up purposes. However, If you are looking to make power on the S58, and are upgrading your charge cooler, or adding PI. While you are there, it takes 30 seconds to remove the coolant lines from the TB connections and replace them with our billet coolant delete kit. This completely removes the coolant from the Throttle body and provides a bypass for the coolant. Simply remove the two lines going to the throttle body, and run our hose in their place. You leave the coolant fittings on the TB open and avoid any unwanted heat being introduced into your charge tract. In our opinion a must for full effort builds. We take the work out of it for you. Kit included:
- One Plug and Play TB Coolant Delete Hose
- Billet 6061 Anodized coolant fittings for long leak-free life
- Reinforced 7-ply silicone hose for strength and longevity
- Vibration-resistant crimp clamps
- 100% plug and play, NO cutting or removing factory clamps or hoses. Fully reversible
-
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB Billet Velocity Stack
$35.69 – $45.89Price range: $35.69 through $45.89Running an open turbo, and want to straight out the airflow to the compressor for extra efficiency. Our billet velocity stack is what you need. Backed by physics a Bellmouth or velocity stack will help smooth the air coming into the turbocharger or on NA cars. These are made from 6061-T6, and anodized in a variety of colors and sizes. Currently, we offer 3", 4", and 5" These are suitable to fit any intake tubing or turbocharger inlet with that size. These are available with or without a silicone connector and clamps. Our V-Stacks are also made to extend down on the outside so you can attach a Vibrant S&B or other compatible 7" Filter on the 3"/4" version. Features:- Smooth air before it enters the turbocharger or Intake
- Very low profile, only sticking 2.5" above the turbocharger inlet. Even if you have no room for a filter these will fit
- Fits all turbochargers with a 3", 4" or 5" inlet including PTE Sportsman Cover!
- 3" and 4" version works with Vibrant #10961 7" filter or S&B 1032 FilterĀ if you have room
- 100% billet construction for high-strength
- Anodized for long life, and durability
-
Quick View
S58 Turbocharger Install Kit
$284.99Everything needed to a successful install without having to make a trip to the dealer. -
Quick View
VTT BMW S55 “GCMAX” Turbocharger Upgrade Kit
From: $5,249.99VTT āGC-MAXā Turbocharger Upgrade ā BMW S55 (Twin Turbo)
Supported Power Level (Stock Engine): Up to 1000WHP
Base Architecture: Twin Garrett G25-660 Spec
PTE Style Wheel Designation (Comp/Turb): 67/54
Overview
VTT takes the S55 platform to the next level with our āGC-MAXā evolution of the record-setting GC Series. Based on everything learned from the GC / GC+ programs, GC-MAX pushes the limit of what is possible while retaining full bolt-on, factory-location packaging.
Internal flow paths have been enlarged significantly. A/R is optimized. Inlet diameter is maximized to 2.5ā. Compressor is increased to 67mm. Most importantly ā the turbine housing has been completely retooled to accept our 54mm G25-series turbine wheel used on the G8X S58 GC+ and F9X GC series. This turbine is the key to GC-MAX power ā extremely low backpressure, rapid spool, and capability far beyond any turbine wheel of similar size.
This same wheel architecture has already pushed 1000WHP+ on S58 / S63 based applications ā and has gone 9.44 @ 146mph on a stock motor / stock drivetrain G80. GC-MAX gives the F8X owner a true bolt-on 1000WHP solution without going single turbo and without losing factory response, packaging, or reliability.
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT E/F Series BMW Ultimate Front Drag Brake Kit
$1,399.99 – $1,949.99Price range: $1,399.99 through $1,949.99Looking to make your E/F Series BMW faster in the 1/4 mile or 1/2 mile racing? Want to run 17" or 15" wheels in the front? Want to drop OVER 54lbs of unsprung weight off the front of the car at the same time? Do not want to break the bank while doing so? Look no further than the VTT Ultimate Front Drag kit for the E/F Series BMWs. This kit will allow you to run the wheel/tire combo you need to drop your ETs all while putting the car on a significant diet over the stock front brake setup. The kit is a true plug-and-play kit using Genuine VTT parts, coupled with DOT-approved brake lines, CNC 7075 rotor hats/brackets, and a CEL eliminator harness for the brake sensor. This kit comes in 1 variation, with two different caliper Options for each. We HIGHLY suggest 6-piston Calipers for street driving and 1/2 mile racing. These calipers will drop weight, AND be a braking upgrade over stock calipers. -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick View
A90/91 Supra “GC” Rear Drag Brake Kit
$1,399.99Looking to make your A90/91 Supra faster in the 1/4 mile or 1/2 mile racing? Want to run 17", or 15" wheels with a very minor suspension modification? Want to drop 35lbs of unsprung weight off the Rear of the car at the same time? Do not want to break the bank while doing so? Look no further than the VTT "GC" Rear Drag kit for the A90/91 Toyota Supra. This kit will allow you to run the wheel/tire combo you need to drop your ET's all while putting the car on a significant diet over the stock rear brake set up. Fits all 2020+ Supra, and some G-Series BMW. We have confirmed fitment on most all g series car chassis such as G20, G42 etc -
Quick ViewLooking to go above 31PSI on your VAG vehicle that uses SENT map sensors? If so you will need this 4-bar SENT sensor with integrated IAT. These are plug and play for most 2.5L engines including DAZA, and DNWA(US VERSION), as well as some other VAG platforms. You will need to have your tuner rescale your map for the sensor, but that is the only change needed. We offer them in pairs only, which is needed on most vehicles.
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Plug-and-Play S68 Uprgaded DV Kit
$349.00 – $698.00Price range: $349.00 through $698.00VTT BMW S68 Upgraded DV Kit
For G90, G99, XM, and all S68-powered models
Looking to wake up your S68-powered BMW ā G90 M5, G99 M5 Touring, XM, or other variant ā while improving boost control and ditching those restrictive plastic factory diverter valves?
Weāre proud to introduce the VTT Upgraded DV Kit for the BMW S68 ā designed for enthusiasts who want better performance, quicker boost recovery, and the option for that addictive BOV soundtrack.Our kit replaces one or both factory DVs with high-quality billet Turbosmart units, available in:
-
Plumb Back (OEM-style recirculation ā no added noise)
-
Dual Port (atmospheric vent ā signature BOV sound)
Choose the setup that fits your goals and installation comfort:
-
-
Quick ViewNeed to move your coolant expansion tank to the other side of the vehicle for a single turbo kit you are building? Don't cut your factory wires. Just get a VTT-FAB extension harness, and plug and play! These are 5 feet long, and are covered in expanded sheathing with heat shrink on both ends for a long-lasting, good-looking finish. Fits MOST late model 2015+ BMW models ith a wide 2 pin plug on the coolant expansion tank
-
Sale!Quick View
PFS Supra upgraded LPFP Line
$94.99Original price was: $94.99.$80.74Current price is: $80.74.VTT is proud to offer the PFS A90/91 Supra upgraded LPFP line. This line replaced the factory line from the tank to the hard-line under the drivers feet with a line with 22% more volume capacity. The factory line is just under 8mm ID the PFS line uses genuine Parker 801-6 hose which is 10mm ID. This increases capacity in the line by 22% as stated. This is a plug-and-play option. Remove your factory line, and install this line in its place, it will fit in all the line holders. -
Sale!Quick View
PFS Bucketless Double Shot Fuel Pump Upgrade
$649.99Original price was: $649.99.$552.49Current price is: $552.49. -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB Billet Charge Pipe Weld Flanges
$21.99 – $53.99Price range: $21.99 through $53.99Looking for charge pipe weld flanges for your custom single turbo kit? We got you covered with some of the more popular flanges. Features:- Billet 6061 T6 aluminum
- Raw finish for easy welding
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT noticed a hole in the E9X M3 market for a high-quality, lightweight, NVH-friendly, and easy-to-install Diff Lock Down kit. So we did something about it and went to work on a very innovative design that 100% positively locks the diff down from movement, while shielding it from adding a ton of NVH, and can be used with the stock diff, and subframe bushings. This design uses existing mounting points on the vehicle, you do NOT have to remove the subframe or the Diff to install. Simply lower the diff to access the front cover, drill one hole in the subframe slightly bigger, install an M12 riv-nut, and install the lockdown. A typical install can be 1-2 hours for someone who is experienced working on vehicles. You WILL need a Riv-nut tool to install the Riv-nut, we provide a link below for what we recommend on Amazon. Kit Includes:- Diff Lockdown kit
- All 12.9 Hardware
- 15mm Drill bit for Riv-nut
- M12 Riv-Nut
- 12.9 Diff Bolt with lock nut
- Hardened Steel washers for Diff Bolt
- 100% Billet construction from 6061-T6 aluminum
- Anodized in 4 colors for corrosion resistance, a long-lasting finish, and good looks
- The subframe does NOT have to be removed for installation
- Uses all 12.9 grade hardware
- Does not add excessive NVH
- Comes with a new Diff Bolt, hardened washers, and lock nut
- Positively locks down the diff to eliminate all unwanted movement under launches, acceleration, cornering, etc.
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT is proud to offer a billet breather housing cover for 911/930. This housing has one M14 threaded hole for a sensor and has NO tube hole. This version will not fit 964 turbo, or 993. The housing has a -16 ORB port and can come two ways. With a 1" barbed fitting to accept a 1" hose directly or a -16AN male fitting to accept a -16 hose end, and braided or push lock hose. This gives the end user the choice of running a normal hose or an AN-style hose. The cover is made from 6061-T6 and comes in 4 anodized colors for a beautiful finish and long life Kit includes:- 1 Cover on the color of choice
- 4 Nylock Nuts
- 1 fitting of choice (hose barb, or -16AN)
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT is proud to offer our billet replacement for the factory plastic brake Reservoir cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. These brake caps retain ALL of the factory provisions by simply allowing you to install the factory expansion rubber We also designed these caps to complement our Cummins Billet Oil caps, and Billet Power Steering caps and so all 3 will have the same design. We offer these caps in 5 colors - Red, Black, Blue, Gold, and Clear anodizedFitment includes 99% of all Dodge platforms with a coolant Reservoir tank from the late 90's forward, meaning then fit even the brand New 2022 Cummins, all the way back to the Gen 2, etc. If your Dodge is late 90's or newer this cap most likely will fit
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsRunning upgraded stock frame turbos on your S58 powered G8X M3/4 or just looking to maximize airflow on stock turbos? We have you covered with our silicone intake tubes. These completely great rid of every restriction, accordion section, and any other issues designed into the factory pipes, and replaces them with 100% smooth-flowing silicon intake tubes. These are 7 layers, and wire is impregnated to ensure they will never collapse even under extreme vacuum.Ā Design Features:- Smooth bends, and increased area for maximum flow no matter what turbos you are running
- Wire impregnated 7-Layer Silicone for high strength
- Billet anodized connectors for a great look and long-lasting finish
- High-quality German Clamps
- Easy install 30-45 minutes even for a novice
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT is proud to announce the first of our upcoming carbon fiber product line. The BMW S58 G8X M3/4 Carbon fiber intakes! BMW did a wonderful job designing these intakes and we have found they are only slightly restrictive at elevated power levels, mostly due to the secondary filter inside, and the factory paper filter. Beware of companies selling expensive intake systems, or cone set up, with a single dyno comparison claiming big gains. The factory setup is EXTREMELY efficient with only a couple of small changes. With this in mind, we decided to just take their cues, and make factory-style carbon fiber intake tops with no secondary filters, and high flow cotton pre-oiled filters. These are 8 layers of 100% carbon not a single layer wrapped over plastic and they are 1.3MM thick with our logo vacuum printed onto the tops, with a UV resistant gloss clear coating. This is not only strong but will resist discoloration for an extended period of time. The filters themselves are made with a heat-resistant silicone base, a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow.
Filters are available by themselves for a flow upgrade while keeping the stock look here - https://vargasturbo.com/product/vtt-2021-bmw-m3-m4-high-performance-drop-in-air-filter-upgrade/ Features:- 50 States Emissions Legal
- Easy to install 15-30 minutes even for a novice
- Beautiful Carbon Fiber finish really adds class to the S58 engine bay
- Filters can be cleaned forever meaning never buy new filters
- Up to 13WHP gains
- Completely reversible if you ever want to remove
Fitment: 2021+ BMW
- G80 M3
- G82 M4
- G83 M4 Convertible
-
Out of stockQuick View
VTT DAZA/DNWA Billet Intake Manifold
$1,519.99 – $3,249.99Price range: $1,519.99 through $3,249.99Looking to add some power and tq to your DAZA or DNWA powered vehicle? Also, looking to add some bling to your engine bay? Look no further than the VTT Billet Intake manifold. We truly combine function and fashion with this offering. Machined from Billet 6061-T6, with CFD testing used to aid in design, this manifold gets rid of the restrictions in the factory manifold, and throttle elbow, and improves flow through-out the powerband. During our testing, we saw gains of 29WHP/28WTQ at 5500 RPM and 19WHP/14WTQ at 7500RPM. -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB Turbocharger Outlet Flanges
$27.99 – $47.99Price range: $27.99 through $47.99Need an outlet flange for your turbo? VTT-FAB has you covered with a variety of options! All are machined from 304SS for long life, and great weldability! Choose what you need from the drop-down! -
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT is proud to offer high-performance drop-in replacement filters for the F Series BMW B58. These filters are custom-made for VTT. They are made with a heat-resistant silicone base, a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. We designed these to work with our Carbon Fiber intake Tops, but hese filters will also work perfectly with the stock tops. We offer them in two colors. Red, and Black Features:- 50 States Emissions Legal
- Easy to install 15-30 minutes even for a novice
- Filters can be cleaned forever meaning never buy new filters
- Completely reversible if you ever want to remove
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Reinforced Universal Silicone Hoses
$11.99 – $15.99Price range: $11.99 through $15.99VTT offers silicone hoses in various Push-lock sizes, we use these for our catch can kits, but they are also suitable for coolant, vacuum, boost, etc. Do not use with fuel. We offer: -10 Push Lock 24", and 18" -8 Push Lock 24", and 19.5" -6 Push Lock 24" -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT F3X Ultimate Rear Drag Brake Conversion Kit
$1,119.99 – $1,159.99Price range: $1,119.99 through $1,159.99VTT ultimate F3X ultimate rear brake conversion kit
Ā VTT is happy to announce its new rear brake conversion kits for the F3X platforms. This is the FIRST and only kit currently on the market that will allow 15" wheels and tires to be run on the rear. This kit replaces your rear brake rotors and calipers to fit 15" wheels. It includes lightweight VTT calipers to go from the single-piston factory caliper to race-inspired 4-piston calipers. At the same time, dropping up to a whopping 20 LBS of unsprung weight off the back of your vehicle!
-
Sale!Quick View
Black Tial BOV Spring
$52.49Original price was: $52.49.$49.87Current price is: $49.87.If running a Tial BOV on your N54 instead of the TurboSmart Raceport you want to run the black spring. This will provide you with the most complete vent, and eliminate any chance for flutter/surge. -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB Billet Tig Trailing Sheilds
$199.99 – $209.99Price range: $199.99 through $209.99Introducing VTT-FAB Billet TIG Trailing Shields VTT-FAB is proud to announce our Billet TIG Trailing Shields, designed to set a new standard in the trailing shield market. We identified a gap where existing options were either too expensive or made from materials that degrade, melt, or fail when exposed to hot surfaces during welding. With this in mind, we took a fresh, innovative approach and developed two high-quality trailing shields to address these issues.Product Highlights
- Premium Construction: Crafted from billet 6061-T6 aluminum and anodized in red for corrosion resistance and durability.
- Optimal Gas Coverage: Equipped with an internal diffuser and a finely calibrated screen to fully diffuse gas, ensuring optimal coverage for stronger, cleaner welds.
- Versatile Design: Two versions are available:
- Radiused Trailing Shield: Contoured to match 2.5"ā5" tubing.
- Flat Trailing Shield: Ideal for flat surfaces and other specific welding needs.
- Universal Compatibility: Suitable for all materials and designed to attach directly to your TIG torch.
- Extremely light: With fittings only 2 Oz for the flat version, and 3 Oz for the radiused!
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewMac Solenoids
$31.99 – $64.99Price range: $31.99 through $64.99Looking for Mac solenoids for your build? We got em here at VTT-FAB so you can get everything in one place. We have 3-port, and 4-port in stock! -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick View
VTT E9/8X Rear Drag Brake Conversion Kit
$949.99 – $1,069.99Price range: $949.99 through $1,069.99VTT ultimate E8/9X ultimate rear brake conversion kit
Ā VTT is happy to announce its new rear brake conversion kits for the E8X/E9X platforms. We take what already exists on the market, and make it much more complete, and much more performance-oriented while keeping the clearance for those 15ā wheels. This kit replaces your rear brake rotors and calipers to fit 15" wheels. It includes lightweight Wilwood calipers to go from the single-piston factory caliper to race-inspired 4 Piston calipers. While dropping up to a whopping 20 LBS of unsprung weight off the back of your vehicle!
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Cone Filters
$41.99 – $53.99Price range: $41.99 through $53.99VTT Cone Filters feature High flow elements with a silicone body and a velocity stack built-in for smooth flow. We offer these filters in a variety of sizes for universal use. These are also replacement filters for VTT intake kits including B58 Gen 1,Ā TU, Supra, Audi 4.0, N54 Dual Cone filter kit, etc Kit Includes:- 1 - Cone Filter
- 1 - Clamp
-
Sale!Quick View
VTT VAG RS3/TTRS/Golf 7R/S3 Double Adjust Drag Shock Kit
$1,219.99Original price was: $1,219.99.$1,097.99Current price is: $1,097.99.Looking to maximize your RS3 or TTRS for drag racing? Want to be able to dial in the perfect amount of compression or rebound on your launch? The VTT Double adjust drag shock kit is just want the doctor ordered. -
Sale!Quick View
PFS Single Shot LPFP
$589.99Original price was: $589.99.$501.49Current price is: $501.49. -
Sale!Quick View
PFS Bucketless Single Shot Fuel Pump Upgrade
$409.99Original price was: $409.99.$348.49Current price is: $348.49. -
Quick ViewIntroducing the VTT Remote Oil Cooler Plate for BMW B58 Engines Need extra oil cooling for your track-oriented B58 build or simply looking for better cooling capacity in high-temperature climates? If so, youāre likely considering running an external or upgraded oil cooler on your BMW B58-powered vehicle. However, BMWās design doesnāt make this easyāthe heat exchanger is built directly into the oil filter housing. Thatās where the VTT Remote Oil Cooler Plate comes in. This innovative solution allows you to easily and conveniently remove the factory coolant-supplied heat exchanger on the oil filter housing and replace it with -10AN or -8AN fittings, simplifying the process of running your oil cooler lines. No need to worry about looping the coolantāour plate features a built-in housing that seamlessly loops the coolant circuit for a hassle-free installation.
Key Features:
- Convenient Oil Cooler Integration: Add a remote oil cooler to your BMW-powered vehicle (Gen 1 and Gen 2 B58 engines).
- Flexible Plumbing Options: Includes -8AN or -10AN fittings for easy line routing.
- Built-In Coolant Loop: Eliminates the need to manually loop the coolant circuit, simplifying installation.
- Direct Plug-and-Play Replacement: No modifications or retrofitting required.
- Optional Fittings Available: Choose with or without fittings based on your setup.
- Optional factory gaskets
Whatās Included:
- One Block-Off Plate with Coolant Loop Housing
- Six M6 Bolts
- Optional -10AN or -8AN Fittings
-
Quick View
VTT ultimate G8X ultimate rear brake conversion kit
Ā VTT is happy to announce its new rear brake conversion kits for the G8X platforms. This is the FIRST and only kit currently on the market that will allow 17" wheels and tires to be run on the rear. This kit replaces your rear brake rotors and calipers to fit 17" wheels. It includes GENUINE BMW calipers that RETAIN full parking brake function.Ā This means no downside, 17" wheel fitment, parking brake functionality, no loss of braking power, 26.4LBS unsprung/rotating weight removed.
-
Quick View
N54 “GC LITE 2.0” Stock location Turbocharger Kit
From: $2,619.99We are proud to introduce the latest in our line of N54 turbocharger products the VTT "GC LITE" 2.0 turbochargers.WHP Level supported (with proper fuel, upgrades, and tuning) Stock-700WHP -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT BMW 5X132 G90/G99 M5 Conversion Wheel Spacers
$59.99 – $69.99Price range: $59.99 through $69.99Looking to convert your G90/G99 M5ās 5Ć132 bolt pattern to more common 5Ć112 or 5Ć114.3 wheels and open up your wheel options dramatically? Weāve got you covered with our VTT wheel spacer conversion kits.
These kits are CNC-machined from billet 6061-T6 aluminum and anodized for a long-lasting finish. We press in class 10.9 studs with a corrosion-resistant zinc coating for years of reliable use.
Each spacer allows you to bolt on either 5x112 or 5x114.3 wheels while maintaining proper hub-centric fitment. No wobble bolts or redrilling required.
Options & Specs:
-
Available in 15mm, 17.5mm, and 20mm thicknesses
-
Hub bore: 66.6mm (Hub-centric adapter rings available for other sizes)
-
Studs: M14x1.5
-
Stud length: 40mm total
-
Includes black open-ended 19mm lug nuts
QTY 1 is for ONE SPACER. If you need to do 4 wheels order FOUR!
We offer Hub-Centric adapter rings to fit other wheel bore sizes
-
-
Sale!Quick View
VTT Plug and Play S58 Single HPFP Conversion Kit
$349.00Original price was: $349.00.$299.00Current price is: $299.00.VTT Plug and Play S58 Single HPFP Conversion Kit
The Only Proven Solution to S58 Exhaust Cam Timing Drift ā Without Locking the Cam! Tested at over 1400WHP!
We are proud to introduce the first and only kit on the market that completely resolves the notorious S58 exhaust cam timing drift at high RPM ā all without sacrificing the benefits of variable valve timing by locking the cam.
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT S58 Plug and Play Coolant Pressure Sensor Kit
$39.99 – $139.99Price range: $39.99 through $139.99VTT S58 Plug-and-Play Coolant Pressure Sensor Kit ā For Single Turbo Setups
Building a high-boost single turbo S58 and need to monitor coolant pressure? VTT has the simplest and most effective solution.
This billet fitting replaces the coolant block-off plug at the front of the head when converting to a single turbo, giving you a clean, direct port to monitor coolant pressure right from the cylinder head.
Just thread your sensor into the included 90Ā° fitting, install it onto the adapter, and mount it in placeāperfect for real-time pressure monitoring via tuning platforms like BM3 Rev2 or others that support external sensor inputs.
š¦ Kit Options:
Available with or without sensor, and includes:
-
ā (1) Billet Coolant Adapter Fitting with 1/8" NPT Threads
-
ā (1) 90Ā° Male-to-Female Fitting for Low-Profile Sensor Mounting
-
ā (Optional) 75 PSI Pressure Sensor with Plug and Terminals
-
-
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT BMW B58/S58 Custom Carbon Head Gaskets
$1,043.99 – $1,610.99Price range: $1,043.99 through $1,610.99Looking for a head gasket for your BMW that will hold ALL of the boost? So were we, and nothing we tried worked. So we took matters into our own hands and had what we wanted made. These gaskets are made out of carbon material, and use stainless steel fire rings to ensure you are not pushing boost into your water jacket or between cylinders. There are two versions:- One does NOT require a groove to be cut into the block
- One DOES require a groove to be machined into the block to accept the fire ring.
- Custom made to our specs from Carbon material that will form your head/deck, and seal oil/water passages while fire rings, keep boost in the combustion chamber
- FULLY tested in-house on multiple builds to ensure boost level can be achieved
- They are NOT like the other fire ring gaskets on the marker (SCE/Athena) that do not require machine work, we had zero luck with those. THESE FLAT OUT WORK!
- Choose non-machined or machined version
- Different thicknesses are available as a custom order (4-8 week lead time)
- Different Bores Available as a custom order (4-8 week lead time)
For any gaskets NOT in stock expect a 4-8 week lead time as these are custom-made for us. This includes ANY gasket we currently do not have in stock.
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT/Ace Race 321 Stainless Weld Els
$11.99 – $19.99Price range: $11.99 through $19.99PLEASE NOTE: We keep most of these Els in stock, but if we do not, when you order we will order from Ace Race, and then we can pack all your VTT-FAB parts together for one shipment at one cost. This can slightly delay your order based on lead time from ACE Race. If ACE RACE shows the ELS in stock, and we do not have them in stock, we can usually get them in 1-2 days.
THE FABRICATOR'S CHOICE FOR HIGH HORSEPOWER TURBO MANIFOLD BUILDS!
The Ace Race Parts brand of Schedule 10 45Ā° Weld Els are available in 321 Stainless! OurĀ 321 Stainless Weld Els offer superior corrosion resistance in high-temperature applications ā especially applications that will see extended periods of wide open throttle (e.g.: a track car) or will see repeated high heat cycling (e.g.: a drag car that sees significant cooling between passes). With a slight addition of Titanium to stabilize the alloy at high temperatures,Ā 321 Stainless is an excellent choice for turbo manifolds that will be exposed to high levels of heat over a prolonged period of time.
FEATURES
- 321 Stainless Steel
- Allows for a Smooth, Unobstructed Flow of Exhaust Gas
- Durable Enough for a Wide Variety of Turbo Manifold Applications
- Capable of Withstanding 1,600Ā°F
- 37.5Ā° Beveled Ends
- Manufactured to ASTM A403/ASME B16.9 specifications
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNeed a Tee fitting for plumbing Vacuum, or Boost lines, Don't want to use cheap plastic ones that can get soft when hard, and brittle after they heat cycle? We didn't either, which is why we machined these high-quality billet tees to solve this issue. Machine from 6061-T6 aluminum, and anodized in black for a long-lasting corrosion-free finish, these tees look great, and will you never have to worry about one failing. We offer them in two sizes, each size has 12mm legs and 3 barbs:- 7.60mm / -4 Push Lock for people looking to use -4 push lock hose or -4 AN hose. This is a perfect fit for those.
- 1/4" For people looking to use 1/4" vacuum tube
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT F8X M2C/3/4 BMW Ultimate Lightweight Rear Brake Kit
$1,609.99 – $1,949.99Price range: $1,609.99 through $1,949.99Are you looking to make your F8X Series BMW faster in the 1/4 mile or 1/2 mile racing? Want to run 17" wheels in the front? Want to drop 21 lbs of unsprung weight off the front of your F8X M2C/M3/M4 at the same time? Do not want to break the bank while doing so? Look no further than the VTT F8X Series BMW Ultimate Lightweight Front Brake Kit! This kit will allow you to run the wheel/tire combo you need to drop your ETs all while putting the car on a significant diet over the stock front brake setup. The kit is a true plug-and-play kit using Custom VTT parts, coupled with DOT-approved brake lines, CNC 7075 rotor hats/brackets, and a CEL eliminator harness for the brake sensor.This kit comes in 1 variation, with two different caliper options. We HIGHLY suggest 6-piston Calipers for street driving and 1/2-mile racing. These calipers will drop weight, AND be a braking upgrade over stock calipers. Requires trimming of dust shields to fit
-
Quick ViewVTT is proud to offer a Phenolic spacer for the BMW B58 platform. When upgrading to an aluminum charge cooler you get the benefit of a better core, and more cooling capacity, but it also comes with the downside of DIRECT heat transfer from the head to the manifold which can cause heat soak and less-than-ideal IAT's even with an upgraded charge cooler. We manufacture these from G11 Expoxy sheet which has great heat and hardness characteristics, and we feel is the ideal material for this application. The thickness is 8mm.
Please note: Longer studs or bolts may be required introducing a phenolic spacer into your system
-
Quick View
PFS POD HPFP Upgrade
$1,219.99The PFS POD (Planetary OverDrive) is an Overspeed gearbox for your N54/early N55 high-pressure fuel pump.Ā Mechanical fuel pump flow potential is a function of shaft speed -spin it faster, get more fuel flow.Ā The PFS POD allows the user to increase the shaft speed 3x, drastically increasing the output capability of a stock N54 HPFP, and avoid the issues of implementing Port Injection and/or Methanol Injection on vehicles that are targeting more power than the stock fuel system can supply. -
Sale!Quick View
VTT F9X X3/4M COMPLETE lock down bundle
From:$557.47Original price was: $557.47.$529.60Current price is: $529.60.Get the COMPLETE lockdown kit for your X3/4M at one low price. Order all 4 pieces together, and save 5%! Transfer Case Bushing are optional -
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLooking to improve the overall driving feel of your Porsche 911/930 or 964? Want more direct throttle response, and improved shifter feel with less slop? Then billet mount/Trans mount upgrades are just what you are looking for. These mounts are perfect for your track build, hot rod build, or anyone looking for a more direct connection with the vehicle at the cost of a little added NVH.
The VTT Billet Engine/Trans Mounts are machined from a solid billet of 6061-T6 and come anodized in 4 colors (if you want a custom color please email, and we may be able to get that done for an added charge). The kit includes everything needed to do the engines or trans mounts including hardware. If you are looking to do BOTH engine, and trans mounts, you will need TWO sets
Kits Includes:- 2 Engine/Trans Mounts of choice
- 2 M12 bolts to mount to the engine bar
- 2 M12 washers
- 4 M8 bolts, washers, and nylock nuts to secure the mounts to the body
- M12 Bolts - 40 ft/lbs or 55 Nm.
- M8 Bolts - 18 ft/lbs or 25
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT A90/91 Billet Aluminum Guibo
$222.49 – $444.99Price range: $222.49 through $444.99 -
Sale!Quick View
VTT BMW F/G Series Double Adjust Drag Shock Kit
$1,169.99Original price was: $1,169.99.$1,052.99Current price is: $1,052.99.Looking to maximize your F or G Series BMW for drag racing? Want to be able to dial in the perfect amount of compression or rebound on your launch? The VTT Double adjust drag shock kit is just want the doctor ordered! -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT HIGH-FLOW -16 Catch Can System
$499.00 – $649.00Price range: $499.00 through $649.00VTT -16 Billet HIGH-FLOW Catch Can System
Maximum Venting for Maximum Power
VTT is proud to introduce our -16 Billet High-Flow Catch Can System ā designed from the ground up for high-horsepower applications requiring serious crankcase ventilation. Whether you're pushing over 900WHP or beyond 2000WHP, this system delivers unmatched performance, reliability, and engine bay cleanliness.
Key Features:
-
Supports -16 AN lines (with optional -12 or -20 fittings)
- 20 Fluid OZ capacity
-
Engineered for big-power builds needing high crankcase pressure relief
-
Triple-stage filtration system to eliminate oil mist ā even in the event of engine failure
-
Designed, tested, and proven to keep oil inside the catch can ā not in your engine bay
Triple Filtration Technology:
-
Stage 1 - Stainless steel filter ā captures 95% of oil mist on entry
-
Stage 2 - Perforated diffuser plate ā further disperses and slows down airflow
-
Stage 3 - Final stainless mesh layer ā scrubs out any remaining vapor before venting
This advanced system has been tested with over 200 PSI of pressure and more than half a quart of oil without releasing a trace of oil mist. As long as the catch can is properly serviced and not overfilled, even catastrophic engine failure wonāt result in a mess under your hood.
Application-Specific Kits Available:
We offer plug-and-play kits for popular platforms, including:
-
G8X M2/M3/M4 (S58) SINGLE TURBO ONLY
-
F9X X3M/X4M SINGLE SINGLE TURBO ONLY
-
A9X Toyota Supra
Each kit includes everything needed for installation: catch can, vehicle-specific bracket, fittings, hoses, and optional drain. Again: Plug-and-play kits include ALL required parts. Bracket, fittings, line, etc. No additional fittings are required except the drain if wanted.
-
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT S58 Remote Oil Filter Kit
$149.00 – $399.00Price range: $149.00 through $399.00VTT Remote Oil Filter Kit ā BMW S58
VTT is excited to introduce our Remote Oil Filter Kit for the BMW S58 engineāengineered to simplify oil filter access, streamline plumbing, and reduce weight and complexity. This kit removes the factory oil filter housing and relocates the filter underneath the vehicle, allowing for easy access and the use of a standard spin-on filter.The filter IS ACCESSIBLE even with the aluminum belly pan on, as long as you are not running a stock-style cross over downpipe.
ā ļø Important Note:
This kit deletes the factory oil cooler unless you choose to plumb it back in yourself. It is intended primarily for drag racing applications, where oil cooling is not needed for short-duration runs. For street, circuit, or road racing, an oil cooler is highly recommended. -
Quick ViewIntroducing VTT Solid Engine Mounts for BMW G8X VTT is proud to offer our Solid Engine Mounts, designed specifically for the BMW G8X M2/M3/M4 platforms!
Why Solid Engine Mounts?
Drivetrain movement is the enemy of high-performance vehicles. As power levels climb and 1/4-mile and lap times drop, the need for a fully solid engine mount solution became clear. These platforms are no exception, and weāve addressed the gap in the market with a robust and reliable solution. We took the factory engine mount design and engineered a solid mounting solution that fits seamlessly within the same space constraints. The result is the only solid engine mount available for these platforms.Key Benefits
- Eliminates Drivetrain Movement: These mounts completely eliminate unwanted engine and drivetrain movement during heavy launches, high-G cornering, and hard acceleration. This ensures maximum power transfer to the driveline, with no energy wasted on component movement.
- Premium Construction: Made from solid 6061-T6 aluminum, these mounts are anodized black for long-lasting corrosion resistance.
- Factory Fitment: Each kit includes two mounts that fit directly into the factory locations using factory mounting hardware.
Fitment
These mounts are compatible with G8Xplatforms including:- G8X: M2/M3/M4
Features:
- Completely eliminates engine and drivetrain movement.
- Constructed from billet 6061-T6 aluminum with a durable anodized finish.
- Plug-and-play fitment using factory mounting hardware.
Whatās Included:
- Two VTT Billet Solid Engine Mounts
Important Note on NVH
These mounts are intended for RACING purposes. Please be aware that these mounts will increase NVH (noise, vibration, and harshness). They are designed for enthusiasts seeking zero movement and are willing to sacrifice some comfort for ultimate performance. If you choose to install these in a street car, understand that the level of NVH increase will vary depending on other drivetrain components, such as transmission or transfer case mounts. Refunds will not be offered for NVH-related complaints. -
Sale!Quick View
VTT Ultimate G8X Lock down Bundle
From:$872.48Original price was: $872.48.$828.86Current price is: $828.86. -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewReplacement Brake Pads for VTT Brake Kits
$69.99 – $209.99Price range: $69.99 through $209.99 -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Tesla Model 3 / Model Y Billet Wheel Spacers
$59.99 – $74.99Price range: $59.99 through $74.99VTT is proud to offer billet wheel spacers for most Tesla platforms. These spacers are CNC machined from 6061-T6 aluminum and hard anodized black for a long corrosion-free life. We offer them in the below sizes, which fit many platforms including but not excluded to Model 3, Model Y, Model S, and Model X- 5x114.3 to 5/114.3 64.1 Bore for Model Y, Model 3 - 15mm, 17.5mm, 20mm, and 25mm
- 5X120 TO 5/120 64.1 Bore for Model S, Model X - 15mm, 17.5mm, 20mm, and 25mm
THESE ARE SOLD INDIVIDUALLY, FOR ONE AXLE ORDER TWO, FOR A COMPLETE SET, ORDER FOUR.
YOU MUST ENSUREĀ YOU HAVE CLEARANCE IN YOUR WHEEL TO FIT THE ORIGINAL MOUNTING HOLES AS THEY ARE NOT FLUSH WITH THE SPACER.
PLEASE DOUBLE-CHECK YOUR BOLT PATTERN, AND HUB BORE BEFORE YOU ORDER. INSTALLED SPACERS CANNOT BE RETURNED!
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLooking to add some airflow to your 2007.5-2017 stock or modified Cummins diesel? Our "Max-Flow" Air Horn gets rid of the restrictive factory air horn and opens up 100%+ more flow to your engine (flows similar to a Banks Monster Ram). Whether you are just trying to make your stock truck run better or free up much-needed flow with an upgraded truck this is the upgrade for you. We made some great changes to the horn including adding an Us-Made Viton Oring instead of a gasket so you no longer have to try to line up the gasket and the bolts when installing the new air horn which can be a cuss-worthy endeavor, as well as the features below. Features of the Horn- Stock Location fitment for plug-and-play install
- Much less restrictive, boost pressure is increased without adding WGDC
- Outflows the stock intake by over 100%
- 4" Inlet for Max-Flow Boost pipes
- 4 1/8" NPT ports for optimal use of Methanol or NOS
- Integrated Viton Gasket to replace the stock gasket (eliminates having to line up the gasket)
- Recommended to be used with our Heater Grid delete kit for max gains - https://vargasturbo.com/product/vtt-billet-heater-grid-delete-dodge-cummins-2007-5-2018/
- This kit is not emissions compliant and is only for use for off-road or race vehicles
- Requires our Silicone Charge (Boost) tubes or other 4" Cold aside boost pipe - https://vargasturbo.com/product/vtt-2013-2018-cummins-6-7l-7-ply-silicone-charge-boost-pipes/
- Cast Max-Flow Airhorn in your choice of color wrinkle Black, or Wrinkle Red
- All hardware needed for the installation
- Brand New #1 injector line
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT F8X Series BMW Ultimate Lightweight Front Brake Kit
$1,609.99 – $1,949.99Price range: $1,609.99 through $1,949.99Are you looking to make your F8X Series BMW faster in the 1/4 mile or 1/2 mile racing? Want to run 17" wheels in the front? Want to drop close to 50 lbs of unsprung weight off the front of your F8X M2C/M3/M4 at the same time? Do not want to break the bank while doing so? Look no further than the VTT F8X Series BMW Ultimate Lightweight Front Brake Kit! This kit will allow you to run the wheel/tire combo you need to drop your ETs all while putting the car on a significant diet over the stock front brake setup. The kit is a true plug-and-play kit using Custom VTT parts, coupled with DOT-approved brake lines, CNC 7075 rotor hats/brackets, and a CEL eliminator harness for the brake sensor. This kit comes in 1 variation, with two different caliper Options. We HIGHLY suggest 6-piston Calipers for street driving and 1/2-mile racing. These calipers will drop weight, AND be a braking upgrade over stock calipers.Ā -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Circle Logo Tee
$31.99 -
Sale!Quick View
PFS Double Shot LPFP
$819.99Original price was: $819.99.$696.99Current price is: $696.99. -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick View-6 Drain Valves For Cans
$31.99 – $53.99Price range: $31.99 through $53.99 -
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewBMW G90/G99 M5 S68 Turbo-Forward Full Flow Intake System ā VTT Complete Billet Turbo Inlet & Dual 4ā Filter Upgrade
$1,099.99Original price was: $1,099.99.$899.99Current price is: $899.99.VTT G90/G99 M5 Complete Turbo-Side Intake System
VTT is proud to announce the first and only intake system for the G90/G99 M5 that eliminates every factory restriction from turbo to filter. Other āintake kitsā on the market only replace the upper half of the system ā leaving the restrictive factory turbo inlet piping in place. That is the actual primary airflow choke pointā¦ meaning those kits only solve half the problem.
Our system removes the entire factory tract and replaces it with precision-engineered billet 6061-T6 adapters that bolt directly to the turbochargers, transitioning into reinforced 2.5ā ā 4ā high-temp silicone and finishing with dual VTT 4ā dry element filters.
This is a true full-flow system ā no factory bottlenecks ā the S68 finally breathes correctly.
Color Options (Make Your Engine Bay Stand Out)
Available silicone colors: Black, Red, Blue, White, Orange
Key Benefits
-
FULL unrestricted flow from turbo outlet all the way to filter
-
Completely eliminates every factory intake bottleneck
-
Major improvement in turbo induction sound
-
Billet 6061-T6 turbo adapters anodized in black
-
High-quality 7-ply silicone construction
-
Direct bolt-on, retains all sensors and PCV functions
-
-
Quick View
VTT/PFS Stainless Steel Fuel Strainer for Walbro In-Tank Pumps
The fuel system is one of the most critical components of your entire buildāit delivers the fuel that translates into big power and fast times! Without proper filtration, your Walbro 274, 285, or 295 fuel pump can ingest contaminants, leading to premature failure. However, choosing the right strainer or pre-filter is just as important as post-filtration. šØ Why Does Your Fuel Pump Need the Right Strainer? ā Too fine of a filter can restrict flow and cause the inlet to collapse. ā Too coarse of a filter can allow debris to pass through, damaging the pump and engine. ā Low-quality materials can break down, collapse, or cause fueling issuesāleading to potential engine failure.The VTT/PFS Stainless Steel Fuel Strainer ā The Ultimate Solution
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-Boost Crankcase Ventilation Adapter for BMW Engines Building or running a high-boost, high-powered BMW engine? Boost increases crankcase pressure, which, if left unchecked, can lead to issues such as smoking, power loss, and even engine failure. Adequate venting is essential for optimal performance and engine health. These are designed to connect directly to S58/B58(TU) stock VC, or screw into ANY VTT Billet or Cast VC While some believe a -10AN vent is sufficient for these builds, the truth is: itās not. To address this, we developed a larger, more effective solution for our buildsānow available for everyone. Our Oil CapĀ adapter securely snaps in place, replacing your oil cap and providing a platform for a -16ORB fitting in a variety of configurations. Choose from -12AN to -20AN fittings, depending on your buildās needs. This cap is thicker than our low-profile option so care must be taken when planning hood clearance for the versatile venting options.Key Features:
- Attractive Oil cap design
- Connects to stock S58/B58(TU) VC or VTT Billet/Cast VC
- Vented, comes with multi-hole venting to knock down large oil droplets before they make their way into the catch can system
- High-performance venting: Supports configurations from -12AN to -20AN fittings.
- Customizable: Compatible with various fittings to suit your build.
Important Notes:
- This kit requires you to supply your own hose, hose ends, and catch can to complete the system.
- Some fitting options may require 4ā5 days for shipping, as we keep only select configurations in stock.
- Also fits other platforms such as B48, B46, Mini, etc. DOES NOT FIT Gen 1 B58
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewPFS F8X S55-powered BMW Drop in Brushless System (DIBS) LPFP upgrade (800-1000WHP+ Capable)
$829.99 – $1,099.99Price range: $829.99 through $1,099.99PFS is proud to offer a true drop-in LPFP for S55-powered BMWs.Ā This LPFP needs NO additional pumps, wiring harnesses, controllers, etc.Ā Capability is 850whp on E85 and up to 1000whp on race fuel. We start with a factory bucket, we modify it to accept our high-flow brushless fuel pump. We then re-terminate the factory wiring to accept the new pump. No wiring splices, done the same way the factory does -the right way.Ā Every pump is fully tested on our flow bench to ensure proper function before shipping -you're going to be installing a product that has already proven itself. This pump is a true drop-in meaning you pull the factory unit out, install this pump, plug the factory plug into the hat, and you are done. The stock ECU controls the pump fully, and NO tune changes are required to take advantage of it.Ā Installation is easy for the DIY'er, and if you use a performance shop it'll be easy for them -just tell them to remove the old and replace it with new same as factory pump. -
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB S58 Factory Control EWG Top Mount Single Turbo kit
$6,614.99 – $10,772.99Price range: $6,614.99 through $10,772.99VTT-FAB is proud to offer the premiere top-mount single turbo kit for the G8X S58 platform. This kit is 100% made in the USA at our Hayward, CA facility, and only uses top-of-the-line components. We start with 321 Stainless materials as well as Billet flanges to create a high flowing, and long-lasting manifold. We couple this with our revolutionary factory-controlled external gate system using a Turbosmart 60mm Straight gate. This gives you COMPLETE control of an external wastegate with your factory ECU tune. This means no external boxes to control boost, no mac solenoids, and no vacuum/boost lines. Simply reuse your factory actuator on our adapter, and you have the best flowing, and easiest-to-control system on the market with a true boost range of 0 psi, to whatever your turbo of choice can make.Please inquire about the current build time on kits - Sales@vargasturbo.com
NOTE: EVERY VTT-FAB SINGLE TURBO KIT IS BUILT TO ORDER, AND CANNOT BE CANCELLED ONCE MADE, PLEASE ORDER CAREFULLY.
PLEASE NOTE: GARRETT TURBOCHARGER OPTIONS DO NOT COME WITH WATER COOLING LINES. THEY ARE OIL-COOLED ONLY WHICH IS 100% FINE FOR STREET AND DRAG DUTIES. IF YOU PLAN TO ROAD RACE THE CAR WE SUGGEST ADDING WATER LINES
WE HIGHLY, HIGHLY SUGGEST RUNNING OUR ONE-WAY BREATHER WHEN ADDING A SINGLE TURBO KIT, AS YOU DELETE MOST OF THE PCV SYSTEM, FAILURE TO ADD THIS OR SOME SORT OF CRANKCASE VENTING LIKELY WILL RESULT IN CRANKCASE PRESSURE, AND POSSIBLY SMOKING. YOU CAN ADD ONE FROM THE DROP DOWNS
Features:- Fully Fabbed in-house in Hayward Ca using US-sourced parts
- Full 4" Downpipe for every kit (available in factory style termination or Race 4" single with optional turn down)
- All Tig Welded
- VTT-FAB 6 into BILLET COLLECTOR
- Fully set up for our VTT-FAB factory-controlled turbo smart straight gate. Making this plug-and-play with your existing tuner
- 321 Stainless Weld Els for the ultimate in heat resistance and durability
- 1.25" Primary for lightening spool, and high exhaust gas velocity
- NO external boost control is needed
- That AMAZING 6 into 1 turbo sound that divided housings just dont give you
- The charge pipe is flanged for a Turbosmart or Tial BOV
-
Sale!Quick View
VTT A9X Supra / G42 2 Series / G2X Lock down Bundle
From:$714.97Original price was: $714.97.$679.23Current price is: $679.23. -
Quick ViewAlready have the VTT X3/4M rear diff bushing kit, and want to add the front side. This will allow you to buy it separately.Ā Adding in the front side increases installation time, and difficulty as the diff will need to be dropped, and a tool will need to be used to press in the front side bushing Kit includes:
- Front side bushing which will work in conjunction with the rear side to fully lock down the bushing. (Requires the diff to be lowered, and the insert pressed into the front)
-
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT “DCS” EWG System for TurboSmart Straight Gates
$755.99 – $1,421.99Price range: $755.99 through $1,421.99VTT is proud to offer our EWG "Direct Control System" or DCS! This is a completely new innovation for people looking to control the highest-flowing wastegate on the market using an existing BMW electronic actuator. This system will allow BMW owners who have a vehicle with Electronic Wastegates from the factory to utilize this system to control an externally wastegated turbo system, AND it will ALSO allow ANY vehicle to use this setup to control your own custom turbo system. This is done by utilizing our custom 7075 Billet aluminum bracket coupled with a Turbosmart Straight gate, and if needed an EWG controller made for us by DCCD Pro. This allows direct external wastegate control over any turbocharger system with or without EWG for the factory. Features:- Utilizes the most current wastegate technology the Turbosmart Straight Gate. This gate allows maximum flow with minimal restriction, low drive pressure, and much more. Full details can be found here - https://www.turbosmart.com/product/electronic-straightgate-esg50-external-wastegate/
- Can be configured in multiple ways, and angles based on how you mount the adapter
- The adapter is 7075 Aluminum which has the strength of steel and weight of aluminum
- All connection fittings, are made from Nitronic 60 which has extremely high temperature and wear properties
- Zero Drive Pressure, no springs, no poppet valves, direct control over the gate using factory ECU logic
- Adaptable to ANY turbo system on any car to provide the ultimate in boost control!
-
Quick ViewLooking to replace your damaged factory BMW Actuator part number - 11658691853 VTT has located and ordered in bulk these actuators, and offer them at a discounted price. These are 100% FACTORY BMW OEM actuators, not aftermarket. Fitment is for the following, but they work to replace basically any BMW Actuator.
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB Billet Extended Turbo Drain Adapters
$41.99 – $59.99Price range: $41.99 through $59.99Looking for a high-quality extended turbo drain in a straight or 45-degree angle for Garrett GT, GTX, G series, and T3/T4 (precision, etc). We got you covered with these high-quality billet drain adapters. Flanges available:- VTT-FAB-062 T3/T4 square opening, Garrett GT/GTX40+/G40+ 3.5" neck, All precision -10AN Male
- VTT-FAB-063 Garrett GT/GTX25-35/G25-G35 3.5" neck -10AN Male
- VTT-FAB-064 Garrett GT/GTX25-35/G25-G35 4" neck -3/4" hose barb
- VTT-FAB-081 T3/T4 square opening, Garrett GT/GTX40+/G40+ 2.5" 45-degree neck, All precision -10AN Male
- VTT-FAB-082Ā T3/T4 square opening, Garrett GT/GTX40+/G40+ 2.5" 45-degree neck, All precision 3/4" Hose Barb
- VTT-FAB-083 T3/T4 square opening, Garrett GT/GTX40+/G40+ 1" neck, All precision -10AN Male
- VTT-FAB-084 Garrett GT/GTX25-35/G25-G35 2.5" 45-degree neck -10AN Male
- VTT-FAB-085 Garrett GT/GTX25-35/G25-G35 2.5" 45-degree neck -3/4" hose barb
- VTT-FAB-086 Garrett GT/GTX25-35/G25-G35 1" neck -10AN Male
-
Quick ViewAvailable via PRE-ORDER. We expect stock Q2/2023 Supported power level GC Stock-550WHP Ready to take your FK8 CTR to the next level?Ā Don't want to deal with core charges, long lead times, or restrictive factory housings? Look no further! VTT has you covered with our 100% new castingĀ āGCā turbocharger upgrade. We start by keeping the great design elements of the factory 2L turbo and removing the not-so-great ones such as the small factory inlet area, bearing housing oil structure, thrust bearing, and anything else we saw that could be improved upon. This is not your basic TD04 CHRA. We completely changed the bearing structure to an 8mm turbine shaft, and journal bearing, making it larger than anything in the TD04 MHI family, this truly is a custom unit. We also increased the thrust assembly dramatically to deal with the increased thrust loads. With the basics covered, we stepped it up a level by adding proprietary VTT changes to the housings, A/R Ratios and finished off by having all these parts cast to OE quality.Ā What this means for you is serious 2.0L power made easy; GCs are a drop in turbocharger upgrade that supports up to 550WHP while maintaining very fast spool and all factory connections including oil, water, downpipe, and charge pipe. This turbo is perfect for the FK8 owner looking to max out the factory fuel system and make their CTR more fun to drive with power to redline, as well as the customer looking to add a fuel system and push towards the 550+WHP range. This truly is the unit for everyone. We said the same with our 1.5L SI offering, and have delivered on every promise, due to our no-compromise approach to the upgrade.
-
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT “Game Changer” S58 Charge Air Cooler
$3,779.99 – $4,319.99Price range: $3,779.99 through $4,319.99VTT is proud to announce our āGame Changerā charge air cooler for the S58 G8X, and F9X X3/4M platforms! We have completed testing, and any production changes, and are happy to open Pre-orders for the coolers! While the factory charge air cooler is well done, and robust it leaves a lot to be desired on repeated pulls and ends up heat soaked very quickly. Using Proprietary US MADE āWAGNER Intercoolerā Cores. We then couple that with CFD-designed runners, and end tanks that we have TIG welded right here in San Leandro California. With this strategy, we are able to take the limited space given to us by the factory, and add not only a larger more efficient core, but also much better designed/flowing runners, and end tanks. We also pack the unit with tons of awesome features, all at a great price! Pricing is as follows:- DI Manifold only - Raw Aluminum - $3999
- PI Manifold with Fuel Rail and PI provisions - Raw Aluminum - $4199
- DI Manifold only - Cerakoted with thermal Dispersion OR custom color - $4369
- PI Manifold With Fuel Rail and PI provisions - Cerakoted with thermal Dispersion OR custom color - $4569
-
Sale!Quick View
VTT BMW E9/8X Double Adjust Drag Shock Kit
$1,169.99Original price was: $1,169.99.$1,052.99Current price is: $1,052.99.Looking to maximize your E9/8X Series BMW for drag racing? Want to be able to dial in the perfect amount of compression or rebound on your launch? The VTT Double adjust drag shock kit is just want the doctor ordered! -
Sale!Quick View
VTT A90/91 Double Adjust Drag Shock Kit
$1,399.99Original price was: $1,399.99.$1,259.99Current price is: $1,259.99.Looking to maximize your A90/91 for drag racing? Want to be able to dial in the perfect amount of compression or rebound on your launch? The VTT Double adjust drag shock kit is just want the doctor ordered! -
Quick ViewN54 Specific bracket for our Midual VTT catch cans. This is for the Dual can version. Mounts to the driver side strut bar.
-
Quick ViewThis is the same as our N54 OCC brackets except the tabs are bent at a 90-degree angle to make for mounting to any flat surface.
-
Sale!Quick View
External HPFP Controller for Secondary HPFP
$389.99Original price was: $389.99.$370.49Current price is: $370.49. -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB Aluminum V-Band Flanges / Complete Assemblies
$17.99 – $31.99Price range: $17.99 through $31.99Looking to get rid of problematic hose connections, and have a secure charge pipe tract with upwards of 200psi rated pressure? We got you covered with our Billet Aluminum V-band flanges. These flanges are made from 6061-T6 and come raw for easy welding. Utilize a male, and female stepped design with an Oring seal for the ultimate in reliability. Optional clamp is also available. Sizes offered:- 2"
- 2.5"
- 3"
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT BMW TITANIUM 5×112 to 5×114 Bolt Pattern Conversion Kits
$199.99 – $389.99Price range: $199.99 through $389.99Looking to convert your 5x112 M14x1.25 BMW vehicle to 5x114 to open up your wheel options? Want to drop 60% of the weight off steel options? We got covered with our VTT TITANIUM wheel stud conversion kits. These kits are Grade 5 Titanium studs, rated at more than 135,000PSI Tensile Strength, with Grade 5 Titanium nuts with a 60-degree cone seat to fit most all aftermarket wheel applications and convert your vehicle to M12x1.5 wheel studs which allow you to fit 5x114 wheels with no other changes.PLEASE NOTE ā THESE STUDS WILL ONLY WORK IF YOUR WHEELS ARE DRILLED M14 THESE WILL NOT WORK FOR WHEELS DRILLED M12!
DO NOT USE ANY HUB-CENTERING SLEEVES WITH THESE CONVERSION STUDS, THE LUGS WILL CENTER THE WHEELS. THE USE OF A CENTERING SLEEVE MAY LEAD TO STUDS BREAKING. FOR INSTALLATION YOU MUST SNUG EACH LUB UP SLOWLY, AND IN A STAR PATTERN TO GET THE WHEEL CENTERED ON THE LUGS, FAILURE TO DO SO CAN ALSO LEAD TO FAILURE.
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLooking to add some airflow to your 2007.5-2018 Cummins diesel? This is the mod for you. This gets rid of the restrictive failure-prone Heater delete grid, and offers a billet anodized plate in its place. This gets rid of the factory restriction, and possible dreaded bolt dropping into the cylinder. The delete plate is machined from solid 6061-T6 in 4 different colors and has the stand offs as PART of the plate. This costs more to machine but means you are not trying to hold stand off and line up bolts at the same time, which can be a cuss-worthy endeavor. The kit includes:- Heater Grid delete plate in choice of color
- OEM Gasket set
- Map sensor harness extender
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLooking to get rid of the stock rubber Vaccum/Coolant hoses, with a much stronger option, and add some color to your 10th gen civic engine bay? We got you covered with our 6-ply 2016-2021 Civic Silicone Vaccum/Coolant hose kit. Avail in 3 colors, Red, Blue, and Black to match our Silicone Charge Pipes, and Vacuum/Coolant hose kits. These are a direct fit, and come will all-new worm-style clamps to get rid of the hard-to-service spring clamps. -
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLooking to get rid of the stock rubber radiator hoses, with a much stronger option, and add some color to your 10th gen civic engine bay? We got you covered with our 6-ply 2016-2021 Civic Silicone Radiator hose kit. Avail in 3 colors, Red, Blue, and Black to match our Silicone Charge Pipes, and Vacuum/Coolant hose kits. These are a direct fit, and available with new German Made Norma Clamps of you can reuse your original Spring clamps. -
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT is proud to offer the very best charge pipe solution for the 10th Gen Honda Civic platform. This system completely does away with the restrictive, and muli-connection stock charge pipe system, and replaces it with two single 6-ply, Heat Resistant, Wire reinforced silicone charge pipes rated at over 200 psi.Ā They are molded for the perfect fit in your engine bay, while not sacrificing anything in the way of flow or size. -
Quick View
VTT āGCā Turbocharger Upgrade ā Mercedes M177 / M178 AMG
Supported Power Level (stock engines): up to 900WHP
Base Spec: Garrett G25-660
PTE-style Wheel Designation (Comp/Turb): 58/54
Ready to take your M177/M178 AMG to the next levelāwithout core charges, long lead times, or restrictive factory housings? VTTās 100% new-casting GC turbo upgrade keeps what AMG did right and removes the bottlenecks: restrictive inlets, inefficient bearing-housing oiling, undersized thrust design, and more. We add proprietary VTT revisions and cast at OE-level quality for a true bolt-on that retains near-stock spool and all factory connections (oil, water, downpipe, charge pipe).
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsLooking to upgrade your stock throttle body elbow with a billet piece with the factory restrictions removed, and add some billet pop while doing so? The VTT Billet throttle body is what you are looking for. Machined from Billet 6061-T6 aircraft aluminum, and anodized in either Clear (Raw aluminum), Black or Red. It also comes with a matching spacer that is the proper width to ensure you can add a Turbosmart Kompact DV, and not have fitment issues. Our Spacer also used O-rings instead of a gasket to avoid having to sandwich two gaskets between the pieces. The spacer has one -6AN port, and one 1/8NPT port for various uses, Boost reference, methanol injection, etc These are a direct bolt-on for either 2017-2018, or 2019+ 8V RS3, and 8S TTRS. Please choose the model you need based on the year of your vehicle, and the color you want.Don't forget your VTT Silicone charge pipes, and Turbosmart Kompact DV to complete the upgrade!
-
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT E90 Carbon Fiber Headlight Duct
$548.99 – $602.99Price range: $548.99 through $602.99VTT Carbon Fiber headlight duct for the E90 will complete any racecar or streetcar build helping to get rid of weight and add functionality with a working 6ā³ velocity stack to run your turbocharger into for optimal flow, and ram air. 100% multi-layer prepreg Carbon Fiber, with a UV resistant clear coat for the ultimate in strength, and durability! We offer them in the following varieties: Passenger side duct with 6ā³ Velocity stack 3ā³ hose connection Passenger side duct with 6ā³ Velocity stack 4ā³ hose connectionFITMENT: PLEASE NOTE IT FITS ALL E90, AND E91 MODELS INCLUDING M3, ETC. THIS LIGHT HAS NOT BEEN TEST FIT ON AN LCI VEHICLE, AND WE CAN NOT CONFIRM IT FITS LCI. WE CAN ONLY CONFIRM PRE-LCI FITMENT AT THIS TIME.
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Sticker
$5.99 – $11.99Price range: $5.99 through $11.99 -
Quick ViewWHP Level supported (with proper fuel, upgrades, and tuning) Stock-500WHP Stage 2 / Stock -550WHP Stage 2+
-
Quick View
VTT Hurricane Billet One-Way Crankcase Breather
VTT is proud to introduce the first and only plug-and-play ONE-WAY crankcase breather kit for Hurricane engine applications!
This breather is a simple yet effective upgradeājust remove your oil cap, install the breather, and instantly free up horsepower. It improves turbo draining, ring seal, eliminates crankcase pressure, and enhances your engine bay's aesthetics. Fits with the engine cover on, and you can remove/install the cover without taking off the breather.
Key Features & Benefits:
ā Easy Installation ā Plug-and-play design; installs in minutes
ā Reduces Crankcase Pressure ā Improves turbo performance & engine efficiency
ā Compatible with Stock or Aftermarket PCV Systems ā Can be used alone or paired with the VTT Engine Catch Can for maximum crankcase pressure relief
ā High-Quality Construction ā- 6061-T6 Aircraft-Grade Aluminum with a durable black anodized finish
- Four Stainless Steel Baffles for superior oil control
- PTFE One-Way Check Ball to ensure proper ventilation
- Premium Filter & Clamp to maintain performance and longevity
-
Quick View
VTT Billet 2025+ Ram 1500 Hurricane Dual Catch Can System
(THIS SYSTEM CURRENTLY ONLY FITS SO ENGINES, HO IS COMING SOON)
Itās well known that direct-injected engines are prone to intake valve carbon buildup due to oil vapors being pulled through the factory PCV (Positive Crankcase Ventilation) and CCV (Crankcase Ventilation) systems. While the factory design attempts to mitigate this, it falls short in fully preventing oil contamination.
This results in:
ā Oil accumulation in the intake manifold (PCV/Low Side)
ā Oil entering the turbochargers and charge pipes (CCV/High Side)
ā Excess carbon buildup on intake valves
ā Oily charge pipes, turbo inlets, and degraded performanceThe Ultimate Solution ā VTTās Dual Catch Can System
The most effective way to prevent oil contamination and carbon buildup is with a catch can system. Our system filters oil from blow-by gases before they re-enter the engine.
Unlike most aftermarket catch cans that only address the high side (CCV)āwhich operates under boostāour system features two catch cans for complete protection:
š¹ Low Side (PCV) ā Captures oil vapors at idle and cruise
š¹ High Side (CCV) ā Captures oil vapors under boostThis ensures a clean intake tract, charge pipes, and intake valves throughout your vehicleās lifespan.
Install Video - Link
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Billet Non-Marring Double Ended AN wrenches
$12.99 – $149.99Price range: $12.99 through $149.99Secure Your AN Fittings the Right Way ā Without the Damage
VTT now offers a complete line of precision Billet 6061-T6 Aluminum AN Wrenches, designed to grip without marring your fittings. Whether you're working with -3 or -20 AN sizes, we've got you covered.These wrenches are lightweight, durable, and anodized in 8 vibrant colors for a long-lasting finish and easy size identification.
Available Options:
-
Full Kit: Includes all sizes from -3 to -20
-
Common Size Kit: Includes -4, -6, -8, -10, and -12
-
Individual Wrenches: Purchase only the sizes you need
-
-
Sale!Quick View
VTT Billet B58 (TU) HMM (Coolant Unit) Delete kit
$249.99Original price was: $249.99.$199.99Current price is: $199.99.VTT B58 (TU) HMM Delete Plate
Looking to build a race car with a B58 engine?
Doing a B58 swap and donāt want the complicated BMW Heat Management Module (HMM)?
Need a simple -16AN or -20AN line setup instead of the factory tangle?If so, the VTT B58 (TU) HMM Delete Plate is exactly what you need.
This kit eliminates the bulky OEM Heat Management Module and replaces it with a clean billet block-off solution. The included rear water pump plug and hold-down bracket ensure proper sealing, while the modular -16ORB port allows you to run your choice of -16AN, -20AN, or any compatible fitting. Build your lines, run them to the radiator, add an inline thermostat if desired ā and enjoy a vastly simplified, race-ready B58 cooling system.
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT is proud to offer our Pre-Preg Hand Crafted CarbonĀ Fiber engine covers for the S58 engine. These are plug-and-play and snap into the factory mounting studs using the factory rubber mounts. BMW did a fabulous job on the latest engine offerings, but the overuse of plastics leaves the engine bays looking cheap, and unfinished. These carbon fiber engine covers, as well as our carbon fiber strut bars, are the perfect addition for anyone looking to give their engine bay, a polished, and sharp look. Available in Gloss, and Matte finish for the G8X and X3/4M platformsPLEASE NOTE: MUST REUSE FACTORY EMBLEM
-
Quick ViewVTT is proud to offer high-performance drop-in replacement filters for the 2019+ F9X X3/4M. These filters are custom-made for VTT. They are made with a heat-resistant silicone base, and a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. The factory filters have been proven to be restrictive, and you can improve power, and milage with this simple yet effective upgrade! Simply remove your engine cover, swap in the upgraded filters, and enjoy a better-flowing engine! We offer them in two colors. Red, and Black Features:
- 50 States Emissions Legal
- Easy to install in 15-30 minutes even for a novice
- Filters can be cleaned forever meaning never buy new filters
- Up to 13WHP gains
- Completely reversible if you ever want to remove
Fitment: 2019+ BMW
- F97 X3M
- G98 X4M
-
Quick ViewLooking to fix the diff bolt issue on your G0X X3/X4, G3X 5 Series, and G1X 7 Series chassis? VTT is proud to offer our Rear diff bushing insert kit. This is pressed into the factory bushing and fills the voids in the bushing. This keeps the stock bushing ride compliance but removes any unwanted movement. These are sold as a kit and are available in the rear side only. Kit includes:
- One Billet Bushing insert
- Two 46mm Hardened Steel Washers
- One 12.9 M14 Bolt
- One M14 Lock nut
-
Quick View
VTT 2019+ BMW G2X Carbon Fiber Intake Lids
VTT is proud to offer carbon fiber intake lids for 2019+ BMW G2X platforms and the Toyota Supra.
BMW did an excellent job designing the factory intake system, and through testing weāve found it is only mildly restrictive at elevated power levels. With that in mind, we chose to build on BMWās original design rather than reinvent itācreating a factory-style carbon fiber intake lid paired with a high-flow, reusable cotton filter that maintains stock appearance while improving airflow.
Unlike cosmetic carbon pieces, these intake lids are constructed from 8 full layers of 100% carbon fiber, not a single cosmetic layer wrapped over plastic. Each lid is 1.3 mm thick, vacuum-formed with our VTT logo embedded into the carbon, and finished with a UV-resistant high-gloss clear coat to prevent yellowing and discoloration over time.
The optional high-flow filter features a heat-resistant silicone base and a pre-oiled cotton weave element, designed to capture contaminants while maintaining excellent airflow. Filters are fully serviceable and reusable, eliminating the need for replacements.
For customers wanting airflow improvements while keeping a completely stock appearance, the filter is also available separately here:
https://vargasturbo.com/product/vtt-bmw-toyota-b58-tu-high-performance-drop-in-air-filter-upgrade/ -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT “1.3” Kit for BMW G8X Platforms
$3,259.99 – $3,359.99Price range: $3,259.99 through $3,359.99VTT Is proud to announce our "1.3" kit for BMW G8X Platforms. This kit is a COMPLETE kit for G8X AWD or RWD vehicles looking to maximize their traction at the drag strip. This setup virtually guarantees a 1.3 or better 60 ft time in an AWD vehicle and will beat your best ET before installing. For RWD vehicles this is a must to maximize traction... The kit includes EVERYTHING needed to convert the vehicle to 17" wheels/Slicks in the rear and opens up many options for tires. We recommend Hoosier 28/10.5/17 DBR or MT ET Street R 305/45/17 Buying everything together gets you a 10% discount over buying them on their own!- 2 17x10" Rota wheels custom-made for VTT in various colors
- 2 Tires of your choice MT ET Street R 305/45/17 or Hoosier DBR 28/10.5/17 mounted and balanced before shipment
- VTT complete Ultimate rear brake kit which comes with a custom 2-piece hat/rotor retains the stock parking brake and drops over 26 lbs of unsprung rotating weight off the rear
- 15mm rear spacers to get the perfect fitment for the included tires
- VTT wheel stud kit
Fitment Guide
Fitment confirmed on G80 M3 / G82 M4 / G81 M3 Touring / G83 VertĀ -
Quick View
VTT EVO X Billet One-Way Crankcase Breather
VTT is happy to introduce the first and only available plug-and-play ONE-WAY crankcase breather kit for the 2008-2015 EVO X applications. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, and remove crankcase pressure, all while adding a cool look to your engine bay.Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups, including our VTT Engine catch cans, and billet Valve CoverMade from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one-way check ball, a high-quality filter, and a clamp all work together to keep crankcase pressure where it belongs, out of your crankcase. -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB Carbon Fiber Turbo Blanket
$69.99 – $104.99Price range: $69.99 through $104.99Looking to keep the underhood heat down on your single turbo car, or build? We got you covered with our VTT-FAB Carbon Fiber Turbo Blankets. The outer shell is made of Carbon Fiber, and the inner shell is Silica Fiber. For 2500F intermittent / 1800 direct heat rating. We have them in 2 sizes T3, and T4. See fitment below Kit included:- 1 Carbon Blanket of choice
- 2 install springs
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB Cast Aluminum Short Radius Elbows
$15.99 – $17.99Price range: $15.99 through $17.99Perfect for welding onto compressor housings, or charge piping when you need a tight transition or don't have a lot of room. Available in 2", 2.5", and 3" -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick View2013-2022 VTT Cummins Billet Fuel, and DEF Filler Caps
$15.99 – $21.99Price range: $15.99 through $21.99VTT is proud to offer our billet replacement for the factory plastic Fuel fill, and DEF fill caps. These caps do away with the weak plastic caps, and are precision machined from 6061-T6, then anodized in Blue and Green. These are direct-fit caps and completely replace the factory caps. The fuel fill cap has a rare earth magnet which allows you to stick the cap to the fuel door hinge while filling up to keep it secure. The DEF fill cap allows you to connect it t the plastic strap so it does not get lost. Caps are available as a pair or separatelyFitment:
All 2013-2018 Cummins Ram 1500-2500-3500, 3.0L Ecoboost diesel -
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT is proud to offer the very best EASY-TO-INSTALL charge pipe solution for the 2013-2018 Cummins platform. This system completely does away with the restrictive, and muli-connection stock charge pipe system, and replaces it with two single 7-ply, Heat Resistant, Wire reinforced silicone charge pipes rated at over 250 psi. DON'T struggle trying to install aftermarket hard pipes with 8 clamps, and cuss-worthy space to try to squeeze them in! These are molded for the perfect fit in your engine bay, while not sacrificing anything in the way of flow or size. They also completely isolate your charge air from any additional heat soak coming in from the engine or ambient heat. The stock hot side pipes have many irregular shapes and turns causing turbulence as well as carrying heat.
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT 6 Piston Caliper upgrade (Must own 4 piston kit)
$1,109.99 – $1,169.99Price range: $1,109.99 through $1,169.99 -
Sale!Quick View
VTT DAZA/DNWA GC/GC+ Turbocharger Installation Kit
$294.99Original price was: $294.99.$265.49Current price is: $265.49.Everything you need to perform a successful install on your 2.5 turbo swap! -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewClassic VTT Tee
$31.99 -
Quick ViewThis is the same as our N54 OCC brackets except the tabs are bent at a 90-degree angle to make for mounting to any flat surface.
-
Quick ViewVTT silicone Charge Pipes are the premiere choice for your EBM Charge Pipe needs. Made from high quality, wire impregnated silicone, these inlets are a full 6mm thick, and can withstand even the harshest underhood conditions.
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Hoodie
$47.99 -
Sale!Out of stockQuick View
Plazmaman N54 Intake Manifold
$2,039.99Original price was: $2,039.99.$2,038.96Current price is: $2,038.96. -
Quick ViewOut of stockWHP Level supported (with proper fuel, upgrades, and tuning) Stock-500WHP Stage 2 / Stock -550WHP Stage 2+
-
Sale!Quick View
N54 USB to Serial for HPFP controller (FTDI Chipset)
$37.99Original price was: $37.99.$36.09Current price is: $36.09. -
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT X PFS “EBS” External Brushless System – 2500HP Capable
$2,379.99 – $2,719.99Price range: $2,379.99 through $2,719.99VTT x PFS EBS (External Brushless System) Fuel System
VTT, in collaboration with Performance Fueling Solutions (PFS), is proud to introduce the PFS EBS ā External Brushless System.
The EBS is a fully stand-alone, next-generation brushless fuel system available in both platform-specific and universal fitments. Built around state-of-the-art Protec brushless pump technology, this system is capable of supporting up to 2,500 HP on ethanol-based fuels ā and even more on gasoline or ethanol blends.
With its compact 15" x 10" footprint and ultra-lightweight construction, the PFS EBS is engineered for performance without compromise. The complete system ā including pumps, surge tank, FPR, controllers, and wiring harness ā weighs in at under 10 lbs (dry), thanks to a carbon fiber mounting plate and carefully chosen lightweight materials.
EBS Bench Testing Video:
EBS Bench Test Video -
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Upgraded Silicone G8X (S58) coolant hose kit
$189.99 – $799.99Price range: $189.99 through $799.99VTT Upgraded Silicone G8X (S58) Coolant Hose Kit
Available in BLACK as of 3/12/26 with RED, BLUE, and ORANGE coming very soon!
Upgrade the Weak OEM Plastic Coolant Connectors on Your BMW S58
The issue with the factory S58 coolant system is not the rubber hoses themselves ā itās the OEM plastic quick-connect fittings. Over time, these plastic connectors can become weak, crack, or fail, especially in high-heat performance environments.
VTTĀ offers an upgraded 6-ply silicone coolant hose kit for the BMW S58 platform, featuring CNC-machined billet aluminum connectors for improved durability, reliability, and long-term performance.
This kit is designed as a direct replacement for multiple factory coolant hoses and connector assemblies shown in the OEM BMW cooling system diagram.
Beyond improving reliability, these hoses also add a splash of color to your engine bay, giving the S58 a cleaner and more performance-focused appearance.
Order the complete kit for a savings of almost 15%!
-
Quick View
Stop the Flex. Launch with Confidence.
Soft bushings are the enemy of hard launches and drivetrain longevity. The factory BMW transfer case bushings on the F9X M5/M8 platform are notoriously softāexactly the opposite of what you want when you're putting serious power to the ground.
Sure, you could replace the entire bushing with a solid one, but that often requires lowering or removing the transfer caseānot to mention the added NVH (noise, vibration, and harshness) that comes with it.
Our VTT transfer case bushing inserts offer a smarter solution: reduce bushing flex without sacrificing comfort. You keep smooth, quiet drivability around town and at idleābut when itās time to launch, the transfer case stays planted.
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT HO Hurricane Billet Intake Manifold
Designed for the 3.0L Twin Turbo Dodge / Stellantis Hurricane Engine
Direct bolt-on to the HO engines, will fit the SO as well, but modifications will be required!VTT is proud to introduce our ground-up engineered Hurricane Billet Intake Manifold ā purpose-built specifically for the new generation Stellantis 3.0L Hurricane platform.
This is not a modified stock Intake
This is not a sheet metal welded manifold
This is a fully CNC-machined, aerospace-grade billet manifold engineered from scratch for high-boost, high-flow performance applications.
Engineered for the Next Generation
Using advanced CAE and multi-physics simulation under both steady and transient load conditions, we optimized runner geometry, plenum volume, and internal flow paths to support the airflow demands of modern twin-turbo or single-turbo hurricane builds.
The result is:
-
Superior top-end flow over the OEM composite unit
-
Improved cylinder-to-cylinder distribution
-
Increased plenum stability under high boost
-
Clean integration with factory systems
Designed to install cleanly and function properly without compromise.
Injector specs for PI - 48mm Length - 14mm Top - 14mm Lower O-Ring
-
-
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT F9X M5/M8 S63 BOV Kit
$999.99Original price was: $999.99.$899.99Current price is: $899.99.VTT F9X M5 / M8
Blow-Off Valve (BOV) Kit ā S63 Engine
Fits BMW F90 M5 & F91 / F92 / F93 M8 (All Trims)
Why the S63 Needs a Proper Blow-Off Valve
As capable as the S63 platform is in the F9X M5 and M8, one critical component is missing from the factory configuration: a true diverter valve (DV) or blow-off valve (BOV) to properly vent excess boost pressure during throttle lift.
From the factory, the S63 relies on Valvetronic to manage pressure relief. While this strategy works from an OEM drivability standpoint, it is not an effective method of fully venting boost pressure. Under higher load, rapid throttle closures, or tuned conditions, this can lead to compressor surge, increased stress on the turbochargers, and reduced turbocharger longevity over time.
The VTT BOV Kit adds the missing mechanical venting solution the S63 needs. By properly evacuating excess boost pressure during throttle lift, this system:
-
Reduces compressor surge
-
Protects turbochargers under aggressive driving
-
Improves long-term reliability
-
Delivers the signature BOV sound enthusiasts expect
This is a functional upgrade firstāsound is simply the byproduct.
If upgrading Turbos on your F9x, this kit is something we feel is required to increase longevity
-
-
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewBMW F9X M5-M8 S63 Turbo-Forward Full Flow Intake System ā VTT Complete Billet Turbo Inlet & Dual 4ā Filter Upgrade
$1,099.99Original price was: $1,099.99.$999.99Current price is: $999.99.VTT F9X M5 / M8
Complete Turbo-Side Intake System (S63)
VTT is proud to offer a true full turbo-side intake system for the BMW F9X M5 and M8 platforms, equipped with the S63 engine, that eliminates every factory airflow restriction from the turbocharger inlet all the way to the air filter.
Most intake kits on the market only replace the upper airbox or filter section, while leaving the restrictive factory molded plastic turbo inlet piping in place. That turbo-side inlet is the primary airflow choke point on the S63 platformāmeaning those kits only address half of the problem.
Our system replaces the entire factory intake tract, starting directly at the turbochargers, with precision-machined 6061-T6 billet adapters that bolt straight to the compressor inlets. Airflow then transitions smoothly into reinforced 2.5ā ā 4ā high-temperature silicone tubing, finishing with dual VTT 4ā dry-element air filters.
This is a true unrestricted intake systemāno factory bottlenecks left behindāallowing the S63 to breathe properly under both stock and increased airflow demand.
-
Sale!Quick View
VTT Billet B58/S58 HPFP Block off plates
$129.99Original price was: $129.99.$99.99Current price is: $99.99.VTT B58/S58 HPFP Block-Off Plate Kit
If youāre converting your B58 or S58 build to port injection (PI) only and removing the direct injection (DI) system and high-pressure fuel pumps (HPFPs), youāll need to properly seal the HPFP ports in the valve cover.
Our billet aluminum block-off plates provide a simple, clean solution.
Just remove the HPFP and cam follower, then install the plate ā it seals the valve cover and eliminates the HPFP cleanly and securely.Please Note:
-
Removing the HPFP typically requires a standalone ECU.
-
If youāre only removing a single HPFP (such as on the S58), a tune adjustment will be necessary for proper operation.
-
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewHurricane TT I6 Oil and Coolant Adpater Fittings
$39.99 – $59.99Price range: $39.99 through $59.99Upgrade Your Hurricane TT I6 with Ease ā AN Line Adapter Fittings
Planning to install aftermarket turbochargers on your Hurricane TT I6 and want a hassle-free solution for routing your oil and coolant lines? We've got you covered.
These precision-machined adapter fittings make it simple to convert your factory ports to standard AN line connections:
-
Oil Feed: Converts to -4 AN male
-
Coolant Ports: Converts to -6 AN male
-
Oil Drain: Converts to -10 AN male
Part Numbers:
-
VTT-FAB-126 ā Oil Feed Adapter (-4 AN Male)
-
VTT-FAB-127 ā Coolant Adapter (-6 AN Male)
-
VTT-FAB-084 ā Oil Drain Adapter (-10 AN Male)
Fitment:
Compatible with all Hurricane TT I6 engines, including Standard Output (SO) and High Output (HO) variants. -
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAdd a Touch of Style & Performance to Your Hurricane Engine Bay
Upgrade your engine bay with the VTT Billet Aluminum Oil Cap, designed for both function and form. Machined from high-grade 6061-T6 billet aluminum and anodized in your choice of Black, Red, Blue, or Clear, these caps deliver a premium look with a durable, long-lasting finish.Whether you're at a show or under the hood, this is a small detail that makes a big statement.
Features:
āļø Precision-machined from 6061-T6 billet aluminum
āļø Anodized in 4 vibrant colors for corrosion resistance and visual impact
āļø Direct replacement ā simply remove your stock cap and screw this one onFitment - ALL Hurricane engines SO andĀ HO
-
Quick View
VTT G8X Billet Oil Cooler Adapter Fittings ā Convert to -10AN
Looking to upgrade your G8X to a larger external oil cooler or simply replace the bulky factory hard lines with clean, braided -AN lines? VTT has the solution.
Our Billet Oil Cooler Adapter Fittings allow you to convert both sides of the factory system to -10AN maleāfrom the oil filter housing to the inlets and outlets on the factory oil cooler.
Whether you're building a full drag car with no cooler or a track-focused setup with a large front-mount oil cooler, these adapters paired with our S58 Remote Oil Filter Kit give you full flexibility to configure your oiling system your way.
š§ Kit Includes:
-
(2) Billet -10AN Adapter Fittings (for either the oil filter housing or factory cooler)
Note:
If you're converting both ends (housing and cooler), youāll need 2 kits. -
-
Quick ViewHigh-Boost Crankcase Ventilation Adapter for S58/B58 Engines Building or running a high-boost, high-powered S58 or B58 engine? Boost increases crankcase pressure, which, if left unchecked, can lead to issues such as smoking, power loss, and even engine failure. Adequate venting is essential for optimal performance and engine health. While some believe a -10AN vent is sufficient for these builds, the truth is: itās not. To address this, we developed a larger, more effective solution for our buildsānow available for everyone. Our low-profile adapter securely snaps in place, replacing your oil cap and providing a platform for a -16ORB fitting in a variety of configurations. Choose from -12AN to -20AN fittings, depending on your buildās needs. At just 10mm thick, this adapter maximizes hood clearance for versatile venting options.
Key Features:
- Low-profile design: Only 10mm thick for maximum hood clearance.
- High-performance venting: Supports configurations from -12AN to -20AN fittings.
- Customizable: Compatible with various fittings to suit your build.
Important Notes:
- This kit requires you to supply your own hose, hose ends, and catch can to complete the system.
- Some fitting options may require 4ā5 days for shipping, as we keep only select configurations in stock.
- Also fit other platforms such as B48, B46, Mini, etc. DOES NOT FIT Gen 1 B58
-
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB B58 Factory Control EWG Top Mount Single Turbo kit
$6,614.99 – $9,980.99Price range: $6,614.99 through $9,980.99VTT-FAB is proud to offer the premiere top-mount single turbo kit for the BMW G Series, and Toyota A91 6 port B58 platforms. This kit is 100% made in the USA at our Hayward, CA facility, and only uses top-of-the-line components. We start with 321 Stainless materials as well as Billet flanges to create a high-flowing, and long-lasting equal-length manifold. We couple this with our revolutionary factory-controlled external gate system using a Turbosmart 60mm Straight gate. This gives you COMPLETE control of an external wastegate with your factory ECU tune. This means no external boxes to control boost, no mac solenoids, and no vacuum/boost lines. Simply reuse your factory actuator on our adapter, and you have the best flowing, and easiest-to-control system on the market with a true boost range of 0 psi, to whatever your turbo of choice can make. We use NO Silicone connectors at all on this kit. Two VTT-FAB HD clamps ensure you will never have to worry about blown boost hgoses etc.If your kit choice shows out of stock, please inquire about the current build time on kits - Sales@vargasturbo.com
NOTE: EVERY VTT-FAB SINGLE TURBO KIT IS BUILT TO ORDER, AND CANNOT BE CANCELLED ONCE MADE, PLEASE ORDER CAREFULLY.
PLEASE NOTE: GARRETT TURBOCHARGER OPTIONS DO NOT COME WITH WATER COOLING LINES. THEY ARE OIL-COOLED ONLY WHICH IS 100% FINE FOR STREET AND DRAG DUTIES. IF YOU PLAN TO ROAD RACE THE CAR WE SUGGEST ADDING WATER LINES
WE HIGHLY, HIGHLY SUGGEST RUNNING OUR ONE-WAY BREATHER WHEN ADDING A SINGLE TURBO KIT, AS YOU DELETE MOST OF THE PCV SYSTEM, FAILURE TO ADD THIS OR SOME SORT OF CRANKCASE VENTING LIKELY WILL RESULT IN CRANKCASE PRESSURE, AND POSSIBLY SMOKING. YOU CAN ADD ONE FROM THE DROP DOWNS
Features:- Fully Fabbed in-house in Hayward Ca using US-sourced parts
- Full 4" Downpipe for every kit (available in factory style termination or Race 4" single with optional turn down)
- All Tig Welded
- VTT-FAB 6 into BILLET COLLECTOR
- Fully set up for our VTT-FAB factory-controlled turbo smart straight gate. Making this plug-and-play with your existing tuner
- 321 Stainless Weld Els for the ultimate in heat resistance and durability
- 1.25" Primary for lightening spool, and high exhaust gas velocity
- NO external boost control is needed
- That AMAZING 6 into 1 turbo sound that divided housings just dont give you
- The charge pipe is flanged for a Turbosmart or Tial BOV
- NO Silicone connectors of any kind, twin VTT-FAB HD clamps secure the charge pipe
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsDont be fooled by non-vented- 4-piston caliper front drag brake kits for the G8X. That is all they are good for, one use, Drag racing. If you want a brake kit that matches what your G8X is and is as comfortable doing repeated stops on the street, highway, etc look no further! VTT G8X Lightweight front brake kit drops almost 60 lbs off the front of your G8X, all while using 13" vented rotors, and 6 piston calipers. These brakes will give the factory setup a run for its money in stopping power, and allow you to run the front wheels you need for the traction!Ā This kit will allow you to run the wheel/tire combo you need to drop your ETs all while putting the car on a significant diet over the stock front brake setup. The kit is a true plug-and-play kit using Genuine VTT parts, coupled with DOT-approved brake lines, CNC 7075 rotor hats/brackets Install Guide - Here Fitment Guide:- G8X All
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT G8X BMW Ultimate Lightweight Rear RACE Brake Kit (No Parking Brake)
$1,789.99 – $1,999.99Price range: $1,789.99 through $1,999.99 -
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsAre you looking to make your F9X X3/4M SUV BMW faster in the 1/4 mile or 1/2 mile racing? Want to run 17" wheels in the front? Want to drop close to 75 lbs of unsprung weight off the front of your F9X X3/4M at the same time? Do not want to break the bank while doing so? Look no further than the VTT F9X Series BMW Ultimate Lightweight Front Brake Kit! This kit will allow you to run the wheel/tire combo you need to drop your ETs all while putting the car on a significant diet over the stock front brake setup. The kit is a true plug-and-play kit using Genuine Wilwood parts, coupled with DOT-approved brake lines, CNC 7075 rotor hats/brackets, and a CEL eliminator harness for the brake sensor. Fitment Guide:- F9X X3/4M ALL
-
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB S55 Factory Control EWG Top Mount Single Turbo Manifold
$2,049.99Original price was: $2,049.99.$1,844.99Current price is: $1,844.99.Are you looking to fab up your own S55 Single kit, but want our game-changing factory control via Turbosmart Straight gate? Yep, we offer that. This manifold is fully fabricated in-house using 321 1.25" Sch 10 Weld els, our own wire cut flange, and cast 6 into 1 Collector. We also fab the Turbosmart straight gate port which will provide perfect fitment for our factory-controlled setup. this manifold is designed to work with T3 V-Band inlets such as Garret G25, G30, G35, PTE T3 Size V-band inlet turbos, and Turbosmart T3 V-Band inlet turbos. This kit will require the use of our VTT-FAB Factory controlled External Straight gate set up, which can be purchased separately, and can be added from the drop-down. Features:- Fully Fabbed in-house in Hayward Ca using US-sourced parts
- All Tig Welded
- 6 into Cast Collector that fits most T3 Small Frame Style V-band flanges (choose turbo chose from the drop-down)
- Fully set up for our VTT-FAB factory-controlled turbo smart straight gate. Making this plug-and-play with your existing tuner
- 321 Stainless Weld Els for the ultimate in heat resistance and durability
- 1.25" Primary for lightening spool, and high exhaust gas velocity
- Works with VTT-FAB Fitting adapters
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsWhile BMW did a beautiful job on the F9X X3/4M's they sure decided to get cheap out on the strut bars. Ugly steel bars with no real pop or aesthetically pleasing qualities seem like an afterthought to such a well-thought-out car. Well, here at VTT we decided to do something about it, and immediately took our bars off, and let our engineers go to work on a solution. What they came up with is beautiful, and functional. 100% CNc machined from 6061-T6 aluminum and anodized in a variety of colors The result adds a gorgeous look to your X3/4M engine bay, and what BMW should have done from the factory. Pair these with our beautiful center strut bar for the complete set-up! -
Quick View
VTTEV Tesla Lifting pucks
$27.99Tesla engineered 4 distinct locations on their vehicles to accept specialized pucks to aid in lifting. VTTEV has manufactured these pucks out of high strength Polymer with an O-ring fit to ensure you lift your Tesla properly from the lifting points every time, and save you money over buying the pucks from Tesla! Kit includes:- 4 VTTEV lifting pucks
- VTTEV screen printed Padded carry case
EVERY VTTEV LIGHTWEIGHT RANGE-EXTENDING BRAKE KIT GETS A FREE SET OF LIFTING PUCKS!
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewPFS S58 Port Injection Block Off kit
$112.49 – $222.49Price range: $112.49 through $222.49Looking to return your S58 back to stock, and need a way to close off the ports drilled in the manifold? We got you covered. This kit will bolt into place, allow you to use your existing fuel rail, and insert injector blanks. Or you buy a new rail with the blanks, which will allow you to sell your current PI kit complete. -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB Turbocharger Inlet Flanges
$21.99 – $29.99Price range: $21.99 through $29.99Need an outlet inlet for your turbo? VTT-FAB has you covered with a variety of options! All are machined from 304SS for long life, and great weldability! Choose what you need from the drop down! -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT/ACE Race SEAMLESS PIPE 321 STAINLESS – 4 FOOT LENGTH
$59.99 – $97.49Price range: $59.99 through $97.49PLEASE NOTE: We keep most of these Tube Sections in stock, but if we do not, when you order we will order from Ace Race, and then we can pack all your VTT-FAB parts together for one shipment at one cost. This can slightly delay your order based on lead time from ACE Race. If ACE RACE shows the tube in stock, and we do not have them in stock, we can usually get them in 1-2 days.
THE FABRICATOR'S CHOICE FOR BUILDING TURBO MANIFOLDS & MERGE COLLECTORS!
The Ace Race Parts brand of Schedule 10 321 Stainless Pipe isĀ the perfect match for our Stainless Weld Els for fabricating turbo manifolds. OurĀ 321 Stainless Pipe offers superior corrosion resistance in high-temperature applications ā especially applications that will see extended periods of wide open throttle (e.g.: a track car) or will see repeated high heat cycling (e.g.: a drag car that sees significant cooling between passes). With a slight addition of Titanium to stabilize the alloy at high temperatures,Ā 321 Stainless is an excellent choice for turbo manifolds that will be exposed to high levels of heat over a prolonged period of time.
FEATURES
- 321Ā Stainless Steel
- Seamless Construction ā No Internal Weld Bead
- Allows for a Smooth, Unobstructed Flow of Exhaust Gas
- Durable Enough for a Wide Variety of Turbo Manifold Applications
- Capable of Withstanding 1,600Ā°FĀ
- Manufactured to the ASTM A312Ā specification
-
Quick ViewLooking to control a Garett G25-G35 turbocharger with a BMW EWG actuator, look no further. These billet 7075 Aluminum brackets allow direct fitment of the BMW EWG actuator to the Garrett housing, slotted to allow for almost unlimited adjustability. Features:
- Allows direct fit of BMW EWG to Garrett turbos with no fabrication
- 7075 Aluminum for the strength of steel, but lightweight attributes of aluminum
- Anodized for corrosion resistance, and long-lasting finish
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT is happy to offer our very unique and universal billet mount to fit any roll bar or cage withĀ 1.5", 1.75", or 2" diameter tubing. These mounts are designed from 6061-T6 aluminum and are made to SECURELY hold a JBL Flip version 3 - Version 6 and allows you to bring music into your race car, off-road vehicle, rock crawler, boat, basically anything that has a length of tubing this will allow you to have an easy way to have tunes without having to install and mount a stereo system. They can also be used as a single mount to hold things such as a helmet, steering wheel, or anything you want to quickly hang for easy access once seated. For the JBL flip you will need TWO mounts, simply install them loosely, snap in your JBL Flip to get the proper spacing, and tighten down. The device is then securely mounted and can be removed easily. We offer these in a variety of anodized colors for a long-lasting durable finish including Black, Red, Blue, Clear, Orange, and Green Mounts are sold individually Features:- Billet 6061-T6 Aluminum construction anodized in a variety of colors
- Can be used to SECURELY mount a JBL Flip 3-6 to anything that has a length of 1.5", 1.75" or 2" tubing
- Can also be used as a universal mount for anything you need to hang in your race car, off-road vehicle, etc
- Completely reversible, and can be moved from vehicle to vehicle
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNobody likes oil leaks, but if you have an older Porsche 911 you have learned to live with them due to thin magnesium covers. Well, those days are over! VTT is proud to offer full-billet CNC chain covers for a variety of Porsche 911 platforms.Ā These covers do away with forever the thin magnesium leak-prone factory cover and replace them with thick billet pieces that will help you eliminate leaks while looking amazing!
These cover 1974-1988 2.7L Cars all the way up to 3.3L. These are machined from aerospace billet 6061-T6 and anodized in various colors for a long-lasting finish, and a brilliant look in your engine bay.Ā These are set up to use oil-fed tensioners, and if you want to go with manual tensioners you will need 2x Freeze plug (OEM# 900-036-008-02). We always suggest replacing the gaskets with new ones when changing the covers.
Each kit includes the following
- Two Left/Right billet covers in the color of choice
- Optional New hardware
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsWhile testing our 10th Gen GC turbo we were looking for something to control the PCV a little better and add options for the guys making big power to get rid of the factory PCV so we developed this billet valve cover and dual catch can kit. This is a COMPLETE kit, that fits with our without a flex fuel kit. The Cans bolt to the firewall, and route to the VC via custom lines, and our banjo fittings. Not only does this VC looks beautiful in your engine bay, it is also extremely functional and allows you to tailor your PCV system. The kit is available currently in 3 colors. Red, Black, and Clear anodize and comes with everything needed for a plug-and-play install.Kit Features:
- Gets rid of the stock factory VC, and replace it with a 6061-T6 billet valve cover which will last the lifetime of the car
- Shrouded -10ORB PCV ports for use with our Catch can kit, or you can tailor your system with VTA breathers, etc
- Factory fit and finish
- Comes with US-Made Viton Gasket
Kit Includes:
- One Billet VC in the color of choice
- One Dual Catch Can kit with all connections
- One Vacuum Relief Valve
- Billet Oil Cap
- Viton Gasket
- Titanium or SS hardware options
-
Quick ViewUpgraded your heater delete plate, and your sensor harness is coming up a bit short? No problem, we got you covered with our extension harness. Made from factory style connectors, and high-quality wiring. This harness is the perfect solution to the problem.
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsGet rid of your dry rotted, old factory hose with this reinforced 7-ply silicone upper Radiator hose. Our 7-Ply hose has a burst pressure of over 300PSI and will last the lifetime of the truck. Comes in 3 colors, Black, Red, and Blue Kit Included:- 1 - 7-Ply silicone hose in color of choice
- 2 - high quality German made hose clamps
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Billet 69-83′ IMS Cover
$84.99Billet cover to replace the factory IMS color. Made from 6061-T6, and anodized in 4 colors for a long-lasting finish. Fits 2.2, 2.4, 2.7, and 3.0L engines Kit includes:- Cover in the color of choice
- 3 nylock nuts
-
Quick View
GC Stock ā 700 WHP
VTT 6.7 Cummins āGCā Turbocharger Upgrade
Ready to take your 6.7 Cummins to the next level without dealing with core charges, long lead times, or restrictive factory housings? VTT has you covered with our 100% new casting GC turbocharger upgrade.
We retained the best aspects of the factory Cummins turbo design while eliminating key limitationsāsuch as outdated 12-blade turbine wheels, restrictive turbine housings, and cast compressor wheels. In their place, weāve implemented modern aero advancements, including a billet cobalt VGT nozzle for increased durability and long service life.
Many assume the compressor wheel is the primary factor in power production. While it plays a role, the turbine wheel is the true driver of turbocharger flow and performanceāincluding blade count, aero design, and efficiency.
By replacing the outdated 12-blade turbine with an advanced 9-blade Inconel turbine featuring modern aero and weight-reduction cutouts, the GC turbo delivers:
- Stock-like spool characteristics
- Significantly increased flow capacity
- Up to 700 WHP capability with proper supporting mods
We then take it further with proprietary VTT design enhancements and OE-quality castings, resulting in a true drop-in turbocharger capable of serious performance for towing, sled pulling, or street useāwhile maintaining factory fitment across all connections.
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT 911/930/964T Billet Anodized Single Plug Valve Covers
$339.99 – $649.99Price range: $339.99 through $649.99Nobody likes oil leaks, but if you have an older Porsche 911 you have learned to live with them due to paper/graphite gaskets and thin Magnesium valve covers. Well, those days are over! VTT is proud to offer full-billet CNC Valve covers for a variety of Porsche 911 platforms.Ā These covers do away with forever the thin magnesium leak-prone factory cover, paper or graphite gaskets with thick billet pieces and custom molds o-ring gaskets that will help you eliminate leaks while looking amazing!
These cover 2.0L Cars all the way up to 3.3L including 964 Turbo with single spark plug heads. These are machined from aerospace billet 6061-T6 and anodized in a variety of colors for a long-lasting finish, and a brilliant look in your engine bay.Ā We designed them with extra cooling fins to help pull some heat out of the engine as well.
Each kit includes the following
- Two Upper or two Lower or both Upper and Lower billet covers in the color of choice
- Complete gasket set
- Optional New hardware
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT is proud to offer our billet replacement for the factory plastic Power steering cap. This cap does away with the weak plastic cap while adding some pop, and color to your engine bay. These Power Steering caps retain ALL of the factory provisions. We also designed these caps to complement our Cummins Billet Oil caps, and Cummin Brake Reservoir Caps, so all 3 will have the same design. We offer these caps in 5 colors - Red, Black, Blue, Gold and Clear anodizeFitment:
All 2013-2022 Cummins -
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT is proud to offer high-performance drop-in replacement filters for the BMW B58 TU, this includes G series BMW including Z4, A90/91 Toyota Suora, and. These filters are custom-made for VTT. They are made with a heat-resistant silicone base, and a high-flowing cotton weave element with a pre-oiled design to catch contaminates but allow free flow. We designed these to work with our Carbon Fiber intake Tops, but these filters will also work perfectly with the stock tops. We offer them in two colors. Red, and Black Features:- 50 States Emissions Legal
- Easy to install in 15-30 minutes even for a novice
- Filters can be cleaned forever meaning never buy new filters
- Completely reversible if you ever want to remove
-
Quick ViewAdding a Front-facing manifold to your N54, and need to extend your map sensor harness? We got you covered with ur 24" extension harness. High-quality wiring, with seating, and our own 3D printed connectors ensure a perfect fit.
-
Quick ViewShow off your VTT support and get a good laugh from people with our "We Like To Party" License plate bracket. Born from the infamous quote in Talladega nights
-
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewPFS Golf R, GTI, Audi A3 MQB OEM Replacement LPFP
$222.49Original price was: $222.49.$189.12Current price is: $189.12.Replace your failed OEM fuel pump with a PFS OEM replacement. These are tested to flow the same as stock, and will completely replace your LPFP with a brand new bucket. This also replaces the fuel filter as the filter is built-in into the bucket. Comes with a 1-year warranty -
Quick ViewAll new design for 2018! We are proud to introduce the latest in our line of N54 turbocharger products the VTT "GC" 2.0 turbochargers. This is a new N54 turbocharger from the ground up, using 100% new parts throughout.
-
Quick View
VTT 600 Power Pack
From:$3,699.97Original price was: $3,699.97.$3,599.47Current price is: $3,599.47. -
Quick View
VTT 700 Power Pack
From:$4,281.96Original price was: $4,281.96.$4,145.46Current price is: $4,145.46. -
Out of stockQuick View
Shotgun Double Barrel (N55 2011 Only)
$1,289.99 – $1,519.99Price range: $1,289.99 through $1,519.99 -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewRUN VTT Tee
$31.99 -
Quick View
VTT / Turbosmart EBM BOV Kit
$369.99A plug and play BOV option for your Ecoboost Mustang. This kit comes with everything you will need to replace your undersized factory DV with a high quality Turbosmart Race port. -
Quick ViewVTT silicone inlets are the premiere choice for your EBM inlet needs. Made from high quality, wire impregnated silicone, these inlets are a full 6mm thick, and can withstand even the harshest underhood conditions.
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewN54 Dual Flanges
$329.99 – $409.99Price range: $329.99 through $409.99Built to order. Lead times vary -
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewN54 Stage 3 VTT VTR (Limited Fitment)
$9,094.44 – $9,688.14Price range: $9,094.44 through $9,688.14WHP Level supported (with proper fuel, upgrades, and tuning) 500 - 800WHP -
Out of stockQuick View
Shotgun Double Barrel N54
$1,289.99 – $1,519.99Price range: $1,289.99 through $1,519.99 -
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewTurboSmart KOMPACT EM DV
$294.99Original price was: $294.99.$280.24Current price is: $280.24. -
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewN54 Stage 3 VTT VTX-R (Limited Fitment)
$8,960.39 – $9,285.29Price range: $8,960.39 through $9,285.29WHP Level supported (with proper fuel, upgrades, and tuning) 500 - 900WHP -
Quick ViewThe VTT Single Shot EBM pump is a must have when running E85, and looking for anything over 350WHP
-
Quick View
EBM Upgraded Wastegate Actuator
$127.49The upgrade comes with our own custom rod end to fit the EBM, and is 100% ready to install.
Product categories
- 10% Max Discount
- 15% Max Discount
- BMW
- Diesel
- Ford
- Honda
- Hurricane I6
- Mercedes
- Mitsubishi
- N/S63TU
- No Discount Products
- Porsche
- Powersports
- Tier OBD
- Toyota
- Uncategorized
- Universal
- VTT
- VTT-FAB
- VTTEV
- VW/VAG