-
Quick View
VTT Modular Cast Aluminum CNC Valve Cover Kit
From: $967.44VTT Cast Aluminum Valve Cover ā N54
Upgrade your BMW N54 with VTTās Cast Aluminum Valve Coverāa durable, high-performance alternative to the factory plastic cover. This version offers the same precision machining as our billet model, but at a lower cost, making it the best bang-for-your-buck valve cover upgrade.
By eliminating the factory PCV system, this valve cover allows full customization of your PCV setup. It is also fully modular, meaning it seamlessly integrates with all VTT PCV fittings, breather options, and accessories.
Built from aircraft-grade aluminum, powder-coated in three bold colors, and fully baffled to prevent unwanted oil escape, this cover is a must-have for N54 owners seeking longevity, reliability, and performance.
Key Features & Benefits:
ā Cast CNC 6061-T6 Aircraft-Grade Aluminum Construction ā Built for strength and durability
ā Powder-Coated in Multiple Colors ā Choose from Black Wrinkle, Blue Wrinkle, or Red Wrinkle for a flawless finish
ā Lightweight Design ā Weighs 9.0 lbs (compared to 7.9 lbs for the stock coverājust a 1.1 lb difference)
ā Fully Modular PCV System ā Compatible with all VTT PCV fittings, breathers, and accessories
ā Cost-Effective Alternative ā More affordable than other non-modular cast options
ā Fully Baffled Ports ā Prevents unwanted oil escape
ā Direct Fit for BMW N54 Engines ā Includes a new factory gasket and all required installation hardware -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Modular PCV/Catch Can (Ready to install kits)
$232.49 – $474.99Price range: $232.49 through $474.99VTT Ultimate Modular Valve Cover & PCV System
VTT is proud to introduce a ground-up system that gives the end user complete control over their valve cover and PCV setup. Tired of being told you must run two -10AN lines from your valve cover to your catch can? So were we. This system allows you to configure it exactly how you wantārun it fully VTA, use an oil cap one-way breather, or create your own hybrid setup. Nothing else on the market matches the versatility and functionality of this modular system.
Itās the ULTIMATE Valve Cover & PCV Comboāor choose just the components you need. Run as many or as few connections as you like.
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewN55 Installation kit
$74.99 – $189.99Price range: $74.99 through $189.99 -
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT is proud to offer a Titanium hardware upgrade for all our Billet and Cast VC's. This will come with M6x30 Ti bolts N54 /N55/S55/B58 Gen 1/ B58 TU it will be an Umbrella head with a 16.3mm head. These bolts weigh half as much as comparable steel hardware and look amazing. Colors to choose from will be Burnt, Black, and Natural (silver) -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT- S55 / N55 PCV Delete kit
$99.99 – $399.99Price range: $99.99 through $399.99Have a problematic PCV on your S55/N55 powered BMW, don't want to pay to replace the entire VC? The VTT PCV delete kit is just what you need. This kit blocks the factory PCV from pulling from the head ports, gets rid of the tear-prone rubber diaphragm, and essentially converts your VC into VTA through the factory front port on the VC. This kit can work stand-alone with the cap, and a -10 ORB plug, can be used to run an extra breather port, or it can be installed with any Catch Can kit that uses the front port of the stock VC. Simply remove the factory cap, take out the diaphragm, screw the plug into the center port, and tap the new cap on with a soft blow hammer or similar. This deletes the PCV and allows you to avoid the issues of a failed diaphragm. Kit Choices- Cap and -10ORBĀ plug only (to be used with an existing catch can or VTA)
- Cap and Catch can kit (recirc or VTA) Complete kit to delete the PCV, and run a catch can (Currently works with S55 only)
- Cap Only (To be used if routing an additional hose from the cap to location or set up of choice, requires your parts to work)
- 1 PCV Cap
- 1 PCV port block off Plug
- 1 -10 ORB Plug
- Optional Catch Can kit
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT VAG/BMW/TOYOTA Billet Wheel Spacers
$21.99 – $37.99Price range: $21.99 through $37.99VTT Billet Wheel Spacers
VTT is proud to offer billet wheel spacers for most VAG, BMW, and the A90/91 Toyota Supra platforms.
Each spacer is:
-
CNC-machined from 6061-T6 aluminum
-
Hard anodized black for a long, corrosion-free life
We offer multiple fitments and sizes to suit a wide range of applications.
THESE ARE SOLD INDIVIDUALLY, FOR ONE AXLE ORDER TWO FOR A COMPLETE SET ORDER FOUR.
ANYTHING OVER 5MM WILL REQUIRE LONGER BOLTS OR STUDS. YOU CAN CHOOSE TO ADD A VTT WHEEL STUD KIT FROM THE OPTIONS.
PLEASE DOUBLE CHECK YOUR BOLT PATTERN AND HUB BORE BEFORE YOU ORDER. INSTALLED SPACERS CANNOT BE RETURNED!
-
-
Quick View
N54 Stage 1 Upgrade Kit (Fits all N54 models LHD & RHD)
From: $2,039.99WHP Level supported (with proper fuel, upgrades, and tuning) Stock - 525WHP -
Quick View
VTT PCV Flapper delete
$59.99Made of 6061-T6 aircraft aluminum anodized black, comes with O-ring, and stainless steel holding clip -
Quick ViewLooking to fix the diff bolt issue on your F9X X3/4M? VTT has taken a 3 pronged approach by offering a triple solution, one part of the solution is the Rear diff bushing insert kit. This is pressed into the factory bushing and fills the voids in the bushing. This keeps the stock bushing ride compliance but removes any unwanted movement. These are sold as a kit and are available in rear side only, and front and rear sides both. Adding in the front side increases installation time, and difficulty as the diff will need to be dropped, and a tool will need to be used to press in the front side bushing Kit includes:
- One Billet Bushing insert
- Two 46mm Hardened Steel Washers
- One 12.9 M14 Bolt
- One M14 Lock nut
- Optional front side bushing which will fully lock down the bushing. (requires the diff to be lowered, and the bushing pressed into the front)
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewS55 “GC” Turbocharger Upgrade
$4,059.99 – $5,019.99Price range: $4,059.99 through $5,019.99WHP Level supported (with proper fuel, upgrades, and tuning) Stock-800WHP VTT S55 GC Turbochargers.Ā GC stands for "Game Changers" and that is exactly what these do! They bring a fully new casting Stainless Steel turbine manifold/housing, all new compressor housing with single piece high flow inlet, as well as our tried, and true V2 GC CHRA with a Mar-M246 GTX28 profile turbine wheel, and custom compressor wheel. These turbos have NO core charges, keep your stock turbos, sell them, hold them if you want to go back to stock etc. The turbos will come with custom VTT silicone inlet hoses to mate up with all inlets on the market making them 100% plug, and play. There is no better, more powerful, or well thought out upgrade on the market at any price point! -
Quick View
VTT G Series S58 Billet One Way Crankcase Breather
VTT is happy to introduce the first and only available plug and play ONE-WAY crankcase breather kit for BMW G series S58 applications With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay. FITS with the engine cover on. Engine cover can be removed, and installed without removing the breather. -
Quick ViewGet rid of the restrictive stock plastic intake on your E-Series N55 powered BMW, and replace it with our 2.5 full flow aluminum intake. This is a MUST when upgrading turbos, or trying to get the most from your stock turbo. Constructed of high-grade aluminum, and powder coated with a very durable gloss black finish this upgrade looks as good as it performs.
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsThe stock outlet adapter on the N54/55 is NOTORIOUS for cracking when removing. This Billet replacement ensures no leaks, and no more cracked adapters. Available in 6 colors! Black, Red, Clear, Blue, Purple, Gold -
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT is Proud to offer our Billet Aluminum DCT Transmission pan. This pan does away with the factory plastic pan and upgrades it to 6061-T6 aluminum anodized in a variety of colors. This pan increases fluid capacity by 80% or almost DOUBLE the stock pan, has a US-made reusable Viton Gasket, a rare earth magnet built in to pull metal from the fluid, machined external fins to help aid in cooling, and a -6 ORB drain plug. Product Features:- Billet constructionĀ using 6061-T6 aluminum for long life, and added strength
- 80% or Almost DOUBLE the factory fluid capacity at 2000ML compared to 1150ML
- Machined fins for improved cooling
- Rare Erath magnet built in to pull metal from the fluid
- US-Made Viton Gasket
- -6 ORB drain plug for easy service
-
Quick ViewLooking to go above 45 psi in your BMW-powered vehicle? Looking for a plug-and-play solution? We have you covered with our BMW 5 bar sensor. These will allow 58 psi to be read and are factory plug, and play. Simply remove your old sensor, replace it with the 5 bar, and have your tuner rescale your map values in both your DME tune and your PI tune if applicable.
-
Quick ViewAre you building a single kit for the N54, N55, or S55 platform?Ā M7 Locking exhaust nuts is not easy. So we made our own to combat the issue. These are the perfect solution to the problem of hard-to-find M7 lock nuts. Sold individually so order the number you need.
Note:Ā This is nuts ONLY Stud not included, by our extended M7 studs here - https://vargasturbo.com/product/vtt-fab-extended-m7-n54-n55-s55-b58-2-port-head-studs/
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsStop the Flex. Launch with Confidence.
Soft bushings are the enemy of hard launches and drivetrain longevity. The factory BMW transfer case bushingsāespecially on the G8X and F9X platformsāare notoriously soft. Thatās the last thing you want when youāre putting serious power down.
Sure, you could replace the entire bushing with a solid one, but that often requires lowering or removing the transfer caseānot to mention the added NVH (noise, vibration, and harshness) that comes with it.
Our transfer case bushing inserts offer a smarter solution: reduce bushing flex without sacrificing comfort. You keep smooth, quiet drivability around town and at idleābut when itās time to launch, the transfer case stays planted.
Fitment Notice ā Two Versions Available:
BMW uses two different transfer case bushing types. We now offer Version A and Version B inserts to match.
ā ļø You must physically inspect your vehicleās bushing to determine which version you need.
We are not responsible for incorrect orders if this step is skipped. -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB Billet Mac Solenoid brackets
$49.99 – $53.99Price range: $49.99 through $53.99Building a kit using Mac solenoids to control boost? Need an easy way to mount it? VTT-FAB has you covered with our billet Mac Solenoid brackets. Machined from 6061 billet and anodized in 3 colors, these are the perfect way to mount your Mac valve and look good while doing it. Each kit includes:- One Mac Solenoid bracket (3-Port or 4-Port)
- 2 Allen screws to hold the valve to the bracket
- M6 Moutning Bolt
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Billet BMW B58 Vacuum/Boost Adapter
$53.99 – $69.99Price range: $53.99 through $69.99We are happy to release our BMWB58 (Fits ALL B58 models including TU found in the A90/A91 Toyota Supra) vacuum/boost adapter. These go inline with the intake manifold fitting and provide a full boost/vacuum signal from the manifold. This fitting adds two 1/8NPT bungs to accept any fitting that has 1/8" NPT threads. You can choose options, Fitting by itself, 1/4" barb, as well as 1/8NPT plugs if you only want one barb, etc. You can choose straight or 90-degree barbs. Once installed it tucks perfectly under your engine cover. These are perfect for running your PI switch off manifold pressure which is much more accurate than charge pipe, and they are also great for BOV running the proper size line without having to drill a hole in your manifold. These do space out any sensors etc giving inaccurate readings like some of the other brands do. They are made from 6061-T6 anodized black, with steel plugs, and Blue Anodized barbed fittings. You can choose to order in a few ways. Adapter alone - $40 Basic kit - 1 Adapter, 1 barb, and one plug $45.00 Dual Barb kit - 1 Adapter, 2 barbs, $55.00 -
Quick ViewLooking to make sure all metal contaminates that are possibly in your oil are not circulated? VTT has you covered with our Titanium Magnetic oil drain plugs for BMW, and any other vehicle that uses an M12x1.5 drain plug. This drain plug will capture any ferrous metal in your oil, and capture it to be cleaned during your next oil change. It also is stronger than a Steel or Aluminum drain plug, and looks cool! These are made from GR5 Titanium and use a rare earth magnet to capture metal particles in your oil... Kit includes:
- 1 Titanium Drain Plug
- 1 M12 Crush Washer
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT VC, and Catch can kit. ALL YOU NEED
$1,289.99 – $1,859.99Price range: $1,289.99 through $1,859.99One of the most common emails we get here at VTT is regarding VC set up with catch cans, and which fittings to pick, how to set it up, etc. This kit does away with all of that, and we give you exactly what you need to g to external PCV on the N54 from the experience of installing hundreds of kits. -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT 10th Gen Honda Civic GC Turbocharger Upgrade
$1,389.99 – $1,609.99Price range: $1,389.99 through $1,609.99Support power level GC Stock-350WHP GC+ Stock-400WHP Ready to take your 10th Gen to the next level?Ā Don't want to deal with core charges, long lead times, or restrictive factory housings? Look no further! VTT has you covered with our 100% new castingĀ āGCā turbocharger upgrade. We start by keeping the great design elements of the factory 1.5L turbo and removing the not-so-great ones such as the small factory inlet area, bearing housing oil structure, thrust bearing, and anything else we saw that could be improved upon.Ā With the basics covered, we stepped it up a level by adding proprietary VTT changes and finished off by having all these parts cast to OE quality.Ā What this means for you is serious 1.5L power made easy; GCs are a drop in turbocharger upgrade that supports up to 400WHP while maintaining near factory spool and all factory connections including oil, water, downpipe, and charge pipe. -
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT is proud to offer the very best charge pipe solution for the VAG MK7 Golf/Jetta/A3 platforms. This system completely does away with the restrictive, and muli-connection stock charge pipe system, and replaces it with two single 6-ply, Heat Resistant, Wire reinforced silicone charge pipes rated at over 200 psi.Ā They are molded for the perfect fit in your engine bay, while not sacrificing anything in the way of flow or size. -
Quick ViewThis harness allows you to run aftermarket brakes and not have the brake warning light on the dash due to the brake pad wear sensor being left unplugged. Direct plug, and plug, unplug the wear sensor and plug this in. Nothing else is required. Kit includes: One harness
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT is proud to offer our billet replacement for the BMW B58 factory plastic Oil filter housing cap. This cap does away with the weak plastic cap while adding a strong magnet to pull metal from the oil, and some pop/color to your engine bay. These oil filter housing caps retain ALL of the factory provisions for the filter basket, including the lower pins which are important for the proper function of pressure bypass, etc. We offer these caps in 4 anodized colors - Red, Black, Blue, and Clear -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT 8V RS3/8S TTRS Silicone Charge pipes
$222.49 – $474.99Price range: $222.49 through $474.99VTT is proud to offer the very best charge pipe solution for the Audi 8V RS3 platform. This system completely does away with the restrictive, and muli-connection stock charge pipe system, and replaces it with two single 6-ply, Heat Resistant, Wire reinforced silicone charge pipes rated at over 200 psi.Ā They are molded for the perfect fit in your engine bay, while not sacrificing anything in the way of flow or size. They also completely isolate your charge air from any additional heat soak coming in from the engine or ambient heat. -
Sale!Quick View
VTT Cold Side Charge Pipe / Turbosmart BOV Kit
$409.99Original price was: $409.99.$409.79Current price is: $409.79.A plug and play BOV option for your N54. This kit comes with everything you will need to replace your undersized factory DV with a high quality Turbosmart Race port. -
Quick ViewLooking to remove the HPFP or DI system on your N54? this plate will block the vacuum pump and prevent oil leaks. You will need to remove any fuel lines, etc. Kit includes
- Block Plate
- 3 bolts
- O-Ring
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / Details -
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewN55 VR9 TurboSmart KOMPACT EM DV
$230.37 – $270.74Price range: $230.37 through $270.74VTT Is proud to offer the Turbosmart Kompact EM DV for the N55 The award-winning Kompact EM series Diverter Valves, are the worldās first truly plug and play Diverter Valves. Simply unplug and unbolt your OEM Diverter Valve, and install ours in its place. No adapters, hoses, or extra assembly required. All this while retaining complete OE control of the DVās operation. -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewCatch Can – Fitting A
$15.99 – $41.99Price range: $15.99 through $41.99 -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Carbon Fiber Dragy Holder
$21.99 – $51.99Price range: $21.99 through $51.99Tired of your Dragy flying all over the car as you try to do runs? Tired of low sats or no sats warning due to improper location of the Dragy in the vehicle? Well say goodbye to those issues with our new Carbon Fiber and Plastic Dragy holders. These are made from either 100% Pre-Preg Carbon Fiber, or molded plastic for a perfect fit. The carbon fiber gives it just the right look to add to your performance vehicle! Each holder has dual Suction cups and will stick to any smooth surface. We suggest mounting them in the upper left or right corner of your windshield with a full view of the sky. Dragy holder features- Stop your Dragy from flying off the dash, and having to search for it
- Position your Dragy in the optimal position for the best satellite coverage
- VTT Dragy holder exposes the entire top of the Dragy so nothing is blocking the receiver from the Satellite
- The charging port is not blocked and can be accessed with the cover on
- Choose from REAL Carbon Fiber or Molded Plastic
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsPut an end to the dreaded plastic PS pulley issues with our 100% Billet Aluminum PS pulley. We make these from 6061-T6 aluminum and anodize them in one of 5 colors (Black, Red, Blue, Gold and Clear) for a great look, and long-lasting finish. These weigh 7Oz, very close to the weight of a stock pulley, and are lighter than the cast aluminum versions on the market. Kit includes:- One Billet Power Steering Pulley
- All BMW S65
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT noticed a hole in the VTT A9X Supra/BMW Z4 / G2X / G42 Billet Diff Lock Down Kit market for a high-quality, lightweight, NVH-friendly, and easy-to-install Diff Lock Down kit to improve diff stability under launching, and hard cornering. So we did something about it and went to work on a very innovative design that 100% positively locks the diff down from movement, while shielding it from adding a ton of NVH, and can be used with the stock diff, and subframe bushings. This design uses existing mounting points on the vehicle, you do NOT have to remove the subframe or the Diff to install. Simply remove 4 diff bolts, drill two holes in the subframe slightly bigger, install two M10 riv-nuts, and install the lockdown, you do not even have to move the exhaust. A typical install can be 15-30 minutes for someone who is experienced working on vehicles, an hour if you like taking it slow. You WILL need a Riv-nut tool to install the Riv-nuts, we provide a link below for what we recommend on Amazon. Features:- Lightweight 1.5 lbs for the entire lockdown plate
- Uses FOUR connection points on the Diff, and two on the subframe for the ultimate in positive diff location, this will stop all diff movement on launch, saving your guibos, etc
- 100% Billet construction from 6061-T6 aluminum
- Anodized in 4 colors for corrosion resistance, a long-lasting finish, and good looks
- The subframe does NOT have to be removed for installation
- Uses all 12.9 grade hardware
- Does not add excessive NVH
- Positively locks down the diff to eliminate all unwanted movement under launches, acceleration, cornering, etc.
-
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT BMW Carbon Fiber Driveshaft
$1,699.99 – $1,878.49Price range: $1,699.99 through $1,878.49VTT Carbon Fiber Driveshaft for BMW Applications
Why overpay for a carbon fiber BMW driveshaft?
VTT is proud to offer a premium carbon fiber driveshaft manufactured exclusively for VTT in the USA by GCDS (Gulf Coast Driveshaft) ā one of the premier driveshaft manufacturers in the country with extensive experience in high-performance and drag racing applications.
Each driveshaft is constructed using 3.31" carbon fiber tubing, paired with NEAPCO Performance 1350 series U-joints, then bonded using a proprietary high-strength process and precision balanced to within 1/8 in-oz as a complete assembly.
Every shaft is torque tested in-house prior to shipping to ensure proper bonding and structural integrity. GCDS and VTT are among the few manufacturers that perform full torque testing on each shaft before it leaves the facility.
To complete the system, the driveshaft is paired with VTT-designed 7075 aluminum adapters, eliminating the factory guibos and unnecessary flex points. The shaft connects directly to the BMW 3-bolt front flange, while a VTT 4340 rear adapter replaces the factory slip-in / screw-retained shaft design for improved strength and reliability.
Proudly Made in the USA.
PLEASE NOTE! YOU MUST SEND US YOUR VIN NUMBER TO PROPERLY PROCESS YOUR ORDER, IF YOU DO NOT SEND YOUR VIN, YOU ORDER IS GOING TO BE HELD
PLEASE NOTE! Driveshafts can have UNUSUALLY LONG LEAD TIMES. We hope to reduce this with GCDS, but if the shaft shows OUT OF STOCK, expect a lead time of 4ā8 weeks, unless we specifically state that it can ship sooner.
Due to the nature of these shafts being manufactured by a 3rd party, ANY ORDERS PLACED FOR VTT CF DRIVESHAFTS ARE 100% FINAL.
NO REFUNDS. NO CANCELLATIONS. FOR ANY REASON.
THIS INCLUDES LONG LEAD TIMES.
PLEASE ORDER CAREFULLY. ONCE THE ORDER IS PLACED, IT IS FINAL.
-
Quick View
N54 Stage 2 Kit (Fits all N54 models LHD & RHD)
From: $2,329.99WHP Level supported (with proper fuel, upgrades, and tuning) Stock - 625WHP -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT BMW F8X S55 Engine Catch Can
$339.99 – $359.99Price range: $339.99 through $359.99VTT is proud to announce our F8X Series S55 engine catch can set up. This kit uses our already extremely popular modular catch can, and couples it with a custom CNC 6061 bracket, VTT CNC banjo fittings, VTT 5 ply silicone hose, and Push lock fittings. Installation is simple, takes about 30 minutes to 2 hours depending on your skill level, and requires removing one factory hose to install the VTT hoses. Giving an OEM fit and finish when installed. Our kit stands out from others on the market by using high-quality AN fittings, and VTT Banjo adapters. This is the ONLY catch can kit that is plug, and play with our CNC Billet Valve cover -
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT noticed a hole in the F9X X3/4M market for a high-quality, lightweight, NVH-friendly, and easy-to-install Diff Lock Down kit to improve diff stability under launching, and hard cornering. So we did something about it and went to work on a very innovative design that 100% positively locks the diff down from movement, while shielding it from adding a ton of NVH, and can be used with the stock diff, and subframe bushings. This design uses existing mounting points on the vehicle, you do NOT have to remove the subframe or the Diff to install. Simply remove 4 diff bolts, drill two holes in the subframe slightly bigger, install two M8 riv-nuts, and install the lockdown, you do not even have to move the exhaust. A typical install can be 30-45 minutes for someone who is experienced working on vehicles, an hour or two if you like taking it slow. You WILL need a Riv-nut tool to install the Riv-nuts, we provide a link below for what we recommend on Amazon. Features:- Lightweight 1.5 lbs for the entire lockdown plate
- Uses FOUR connection points on the Diff, and three on the subframe for the ultimate in positive diff location, this will stop all diff movement on launch, saving your guibos, etc
- 100% Billet construction from 6061-T6 aluminum
- Anodized in 3 colors for corrosion resistance, a long-lasting finish, and good looks
- The subframe does NOT have to be removed for installation
- Uses all 12.9 grade hardware
- Does not add excessive NVH
- Positively locks down the diff to eliminate all unwanted movement under launches, acceleration, cornering, etc.
-
Quick ViewTired of getting off the dyno, and having your drivetrain malfunction light on due to a broken plastic ride height bracket? So were we, after we broke 3 of them, we knew it was time to make our own to combat the issue. This bracket is cut from 6061-T6 for strength and anodized black for a long-lasting finish.
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT N54/55 BMW Single Piece Silicone Cold Side Charge Pipe
$112.49 – $464.99Price range: $112.49 through $464.99VTT is proud to offer the very best charge pipe solution for the BMW E Series N54/55 platforms. This system completely does away with the restrictive, and muli-connection stock charge pipe system, and replaces it with a single 6-ply, Heat Resistant, Wire reinforced silicone charge pipe rated at over 200 psi.FITMENT:
ā¢ E Series N54 vehicles 335, 135 (Does not fit Z4, and 5 Series) ā¢E Series N55 vehicles 335, 135 (Does not fit SUV or other models) -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT RS3/TTRS Ultimate Front Drag Brake Kit
$1,339.99 – $1,949.99Price range: $1,339.99 through $1,949.99Looking to make you Rs3/TTRS faster in the 1/4 mile or 1/2 mile racing? Want to run 17, or 15" wheels, and slicks in the front? Want to drop close to 65lbs of weight off the front of the car at the same time? Do not want to break the bank while doing so? Look no further than the VTT Ultimake Front Drag kit for the Rs3/TTRS. This kit will allow you to run the wheel/tire combo you need to drop your ET's all while putting the car on a significant diet over the stock front brake setup. The kit is a true plug-and-play setup using Genuine VTT parts, coupled with DOT-approved brake lines, CNC rotor hats/brackets, and a CEL eliminator harness for the brake sensor. This kit comes in 3 different variations in 2 different caliper sizesDisclaimer: The HD kits are designed for street use, and drag racing. Never use for heavy braking racing environments such as Auto-X or Road Racing.Ā Always drive within your limits!
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewBanjo Fitting Upgrade
$31.99 – $64.99Price range: $31.99 through $64.99 -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT “Spline Lock” Hub Puller
$74.99 -
Sale!Quick View
S55 Turbocharger Install Kit
$329.99Original price was: $329.99.$329.93Current price is: $329.93.Everything needed to a successful install without having to make a trip to the dealer. -
Quick ViewLooking for a way to do burnouts in your ATC13-2 Equipped Xdrive BMW that doesn't have an RWD mode such as G-Series non-M vehicles, and SUVs? We were too! VTT is proud to offer the ONLY easy-to-install, plug, and-play Xdriove controller on the market. This device will allow you to turn off, and turn on again your X-drive capability from the driver seat with a remote. While other options do exist such as X-Delete, or an in-dash gauge, one is a very slow process and is not viable to use as a way to do a burnout at the drag strip, and the other is a very expensive, AND very intrusive device that requires removal of most of the dash, and installing a gauge. Our solution takes 30 seconds to install once you gain access to the underside of the vehicle, and can be removed just as easily. Once installed, you can remotely disable your Xdrive from the driver's seat to perform your burnout, and then quickly enable it again to perform your launch with AWD active. This action does NOT require a key cycle, as soon as you activate it again the car will dismiss any lights and codes generated. This truly is the best of both worlds for ease of use, practicality, and effectiveness, all while coming at a very affordable price. This device uses a BMW plug on one end, and our custom-printed male plug on the other, for a plug, and play OEM fit. NO cutting any wires!
PLEASE NOTE: WHEN ACTIVATED YOUR DASH WILL LIGHT UP WITH CODES BECAUSE YOU ARE IN ESSENCE DISCONNECTING THE TRANSFER CASE. YOU MAY ALSO EXPERIENCE SPORT STEERING DURING THIS TIME WHICH MEANS A HARDER-TO-TURN WHEEL. THIS IS ALL NORMAL. WE ONLY SUGGEST USING THE DEVICE FOR SHORT PERIODS OF TIME, SUCH A BURNOUT AT THE STAGING AREA OF A DRAG RACE. IN SOME INSTANCES, THE CAR WILL NOT ALLOW A BURNOUT IF THE BRAKE, AND THROTTLE ARE APPLIED AT THE SAME TIME DUE TO ECU LOGIC, IN THESE INSTANCES INSTALLING OUR WIRELESS LINE LOCK ELIMINATES THIS ISSUE. MANY TIMES AN AFTERMARKET TUNE WILL ALSO ELIMINATE THIS ISSUE.
THIS DEVICE CAN BE USED FOR THINGS SUCH AS DRIFTING DONUTS ETC., BUT WE DO NOT CONDONE ANY DRIVING OUTSIDE OF LEGAL GUIDELINES. PLEASE USE THIS PRODUCT RESPONSIBLY. SEE ABOVE FOR WHAT IS GOING TO HAPPEN WHEN YOU ENGAGE THIS DEVICE
Install/User Guide is here - Install Guide
Features:- Works on any vehicle outlined below from stock to tuned
- 30-second install
- 30-second removal
- NON-intrusive ZERO cutting of wires, or taking anything apart on the vehicle TRULY plug and play
- OEM fit and finish on the plugs
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsThese are Billet 321 Stub transitions to make a perfect transition from B58/S58 Oval head ports to a 1.25" Sch-10 pipe. This saves you a step and valuable time when fabricating a manifold from scratch. Time is money! These fit our B58, and S58 Wire cut flanges for a perfect transition -
Quick View
VTT “GC” S55/N55 to B58 Coil Conversion Kit
From: $339.99VTT is proud to offer its very own Game Changer S55/N55 to B58 Coil conversion kit for the BMW S55/N55 platforms. The 55 series of engines has notoriously had ignition problems with the factory coils, while aftermarket upgrades do exist, they can be bulky. The solution is the BMW B58 ignition coils which are extremely robust and can support well over 1000WHP with no issues. This means a plug-and-play affordable solution that fits like stock, and looks AMAZING doing so! We designed our own 6061-T6 Billet bracket in a plethora of colors including matching shades for every S55/N55 Valve Cover. This means you can mix and match the color of the bracket with coil color, with VC color to truly tailor your engine bay to look exactly how you want it to!Note: Flash setting changes may be required when installing the conversion kit to ensure the proper function of the B58 coils with S55/N55 DME. This can be found in almost all flashing software settings such as MHD, Bm3, etc.
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT is proud to release our very own center feed N54 intake manifold.Ā This is NOT the SAME sheet metal manifold everyone is selling with a different logo on it, this is a ground-up design focusing on utility as well as increased flow capability. We performed CAE/Multiphysics simulation for both steady and unsteady state operating conditions in order to bring real-world performance benefits to your N54 build.Ā Our manifold is stronger, outflows the OEM manifold, and installs just as easily as your stock piece (no custom charge pipe or throttle body harness required).Ā Performance gains of 20-30WHP+ were had with no tune changes on a 570WHP stock motor F-RB lite turbo car at the top of the RPM range where it matters most for performance.Ā These numbers will only increase with ported heads, high lift cams, or even higher horsepower builds! -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT BMW M12x1.50 Wheel Stud Kits
$74.99 – $137.49Price range: $74.99 through $137.49Looking to get rid of your factory wheel lugs, and convert them to a high-quality stud kit for track purposes or just to make wheel changes easier? We got covered with our VTT wheel stud conversion kits. These kits are forged cold-rolled steel in 10.9 class, with corrosion-resistant coating for years of use. -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Billet Crankcase Breather replacement filter
$21.99 – $27.99Price range: $21.99 through $27.99Need a replacement filter for your VTT Billet Crankcase breather? You can order on here. We offer them in 3 heights, low 48mm, medium58mm, and tall 68mm. This is measured from base to top. The filter will include a new clamp. For reference: N54/55 mostly use the low A90 Supra use Medium Most Audi applications can fit a tall, but measure your filter before ordering. -
Quick View
VTT N54 “DI Injector” Delete Kit
$339.99Looking to get rid of the troublesome and expensive DI injectors on your BMW N54 and move to PI only and a standalone? If so VTT has you covered with its new N54 PI delete kit. This kit allows you to SAFELY remove the DI injectors, install our delete fittings, and run PI only. We machined these deletes from 310 Stainless for extreme heat, and corrosion resistance, and include 3 hold downs. These DI deletes COMPLETELY get rid of all factory provisions, including the seal. If the seal is left intact with no fuel to cool the injector or delete it will quickly overheat and melt the delicate seal causing combustion gasses to escape the engine creating misfires, and worse possibly damaging your injector bore on the cylinder head. Our deletes are machined to be a press fit into the cylinder, and can be either cooled with liquid nitrogen, and dropped in, or tapped in with a hammer, and then held down with the included hold downs. We also include M6 tapped holes on the top of each one in case they need to be removed you can attach a slide hammer, and remove the delete. These are sold as a kit and come with the following- 6 - 310 Stainless DI Delete fittings
- 3 - Hold down brackets
EXTREME ENGINE MODS ARE REQUIRED TO RUN THIS KIT, PLEASE SEE BELOW
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewToyota Supra A90/91 Carbon Fiber Strut Braces
$284.99 – $339.99Price range: $284.99 through $339.99VTT Billet & Forged Carbon Strut Bar ā A90/A91 Toyota Supra
Building on the success of our Billet G8X Strut Bars, VTT has now engineered a version specifically for the A90/A91 Toyota Supra. This design is a true evolution ā not a metal bar wrapped with carbon overlay, but a genuine forged carbon fiber center section paired with precision-machined billet ends.
Each end is CNC-machined from either 6061-T6 aluminum or Grade 2 Titanium, ensuring exceptional strength, rigidity, and long-term durability. Every piece is finished in-house and anodized in your choice of Black, Red, Blue, or genuine T2 Titanium rainbow finish.
This is a true performance and visual upgrade ā not just an accent piece.
Key Features
-
Real Forged Carbon Fiber Construction ā No metal core or cosmetic overlay; this is a full forged carbon center section.
-
Billet Aluminum or Titanium Ends ā CNC-machined from 6061-T6 aluminum or T2 Titanium for maximum precision and strength.
-
Premium Finishes ā Choose from Black, Red, Blue anodized, or genuine T2 Titanium rainbow finish.
-
Direct Fit Design ā Installs using factory mounting points; designed for a perfect fit on the A90/A91 Supra.
Kit Includes
-
(1) Strut Bar in chosen finish
-
(2) M10 Flange Bolts
-
(2) M8 Flange Bolts and Nuts
Notes
-
2021+ Models: May reuse factory hardware if desired.
-
Intake Clearance: Strut bar may not be compatible with all aftermarket intake systems. Verify fitment before installation.
Description
The VTT Billet & Forged Carbon Strut Bar for the A90/A91 Supra delivers both function and form. With its forged carbon center and billet aluminum or titanium ends, it enhances chassis rigidity while transforming the engine bayās visual appeal. Each unit is precisely engineered to align perfectly with factory mounts, offering a simple, bolt-on installation with no modification required.
If youāre looking for a true performance-grade aesthetic upgrade ā not a fake overlay or cosmetic add-on ā this is the strut bar your Supra deserves.
-
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT A90/91 Supra Single Piece Silicone Charge Pipe BOV Version
$389.99 – $629.99Price range: $389.99 through $629.99 -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT MQB Cast V2 “GC” Turbo Upgrade – G30-770/900
$1,679.99 – $1,999.99Price range: $1,679.99 through $1,999.99BALL BEARING NOW AVAILABLE!
VTT MQB āGCā Turbocharger Upgrade ā MQB IS20 / IS38 Platforms
GC (G30-770 spec / PTE ~58/60) ā Rated up to 550WHP
GC+ (G30-900 spec / PTE ~62/62) ā Rated up to 600WHP
Overview
Ready to take your MQB-powered platform to the next levelāwithout core charges, long lead times, or restrictive factory housings? The VTT V2 āGCā Turbocharger Upgrade is a 100% new casting designed to maximize flow, durability, and power potential while retaining OEM fitment and fast spool.
We retained what works within the factory layout and eliminated what doesnāt: small inlets, restrictive turbo mufflers, undersized bearing architecture, and weak thrust design. The factory IHI CHRA is replaced entirely with our proprietary center section featuring a larger turbine shaft and robust journal bearing systemāsignificantly stronger than anything found in IS20 or IS38 stock frames.
Combined with OE-quality castings, VTT geometry, and refined A/R ratios, the VTT GC platform delivers true drop-in performance capable of 550ā600WHP+ depending on configuration and fueling.
-
Quick View
VTT B58 Engine Lifting hook
$15.99Need to work on the B58 engine outside of the car? Lift it to put on an engine stand etc? BMW makes an engine lifting tab but it costs $25, and they do not always have them in stock. We made our own, to avoid the high cost, and possibly long wait time. The perfect tool when you want to lift the engine balanced in the place BMW designed for it to be lifted. Made out of coated steel for high strength, long life, and corrosion resistance. Fits all B58 models, and possibly S58 -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewReplacement Gasket for VTT Valve Covers
$31.99 – $69.99Price range: $31.99 through $69.99Need to replace the gasket on your VTT Aluminum VC? Simply choose your model from the dropdowns to ensure you get the correct version.
Product categories
- 10% Max Discount
- 15% Max Discount
- BMW
- Diesel
- Ford
- Honda
- Hurricane I6
- Mercedes
- Mitsubishi
- N/S63TU
- No Discount Products
- Porsche
- Powersports
- Tier OBD
- Toyota
- Uncategorized
- Universal
- VTT
- VTT-FAB
- VTTEV
- VW/VAG