-
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT X PFS “EBS” External Brushless System – 2500HP Capable
$2,379.99 – $2,719.99Price range: $2,379.99 through $2,719.99VTT x PFS EBS (External Brushless System) Fuel System
VTT, in collaboration with Performance Fueling Solutions (PFS), is proud to introduce the PFS EBS ā External Brushless System.
The EBS is a fully stand-alone, next-generation brushless fuel system available in both platform-specific and universal fitments. Built around state-of-the-art Protec brushless pump technology, this system is capable of supporting up to 2,500 HP on ethanol-based fuels ā and even more on gasoline or ethanol blends.
With its compact 15" x 10" footprint and ultra-lightweight construction, the PFS EBS is engineered for performance without compromise. The complete system ā including pumps, surge tank, FPR, controllers, and wiring harness ā weighs in at under 10 lbs (dry), thanks to a carbon fiber mounting plate and carefully chosen lightweight materials.
EBS Bench Testing Video:
EBS Bench Test Video -
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT Upgraded Silicone G8X (S58) coolant hose kit
$189.99 – $799.99Price range: $189.99 through $799.99VTT Upgraded Silicone G8X (S58) Coolant Hose Kit
Available in BLACK as of 3/12/26 with RED, BLUE, and ORANGE coming very soon!
Upgrade the Weak OEM Plastic Coolant Connectors on Your BMW S58
The issue with the factory S58 coolant system is not the rubber hoses themselves ā itās the OEM plastic quick-connect fittings. Over time, these plastic connectors can become weak, crack, or fail, especially in high-heat performance environments.
VTTĀ offers an upgraded 6-ply silicone coolant hose kit for the BMW S58 platform, featuring CNC-machined billet aluminum connectors for improved durability, reliability, and long-term performance.
This kit is designed as a direct replacement for multiple factory coolant hoses and connector assemblies shown in the OEM BMW cooling system diagram.
Beyond improving reliability, these hoses also add a splash of color to your engine bay, giving the S58 a cleaner and more performance-focused appearance.
Order the complete kit for a savings of almost 15%!
-
Sale!Quick View
VTT Billet B58/S58 HPFP Block off plates
$129.99Original price was: $129.99.$99.99Current price is: $99.99.VTT B58/S58 HPFP Block-Off Plate Kit
If youāre converting your B58 or S58 build to port injection (PI) only and removing the direct injection (DI) system and high-pressure fuel pumps (HPFPs), youāll need to properly seal the HPFP ports in the valve cover.
Our billet aluminum block-off plates provide a simple, clean solution.
Just remove the HPFP and cam follower, then install the plate ā it seals the valve cover and eliminates the HPFP cleanly and securely.Please Note:
-
Removing the HPFP typically requires a standalone ECU.
-
If youāre only removing a single HPFP (such as on the S58), a tune adjustment will be necessary for proper operation.
-
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT B58/S58 Head Port Block-Off Kit or Billet check valve kit
$29.99 – $69.99Price range: $29.99 through $69.99VTT B58/S58 Head Port Block-Off / Built Check Valve Kit
The VTT B58/S58 Head Port Block-Off / Check Valve Kit is designed to either seal off or convert the factory head ports used by the OEM low-side PCV system. These ports in the cylinder head utilize engine vacuum to evacuate crankcase gases ā but in the process, can allow oil to enter the intake manifold, leading to valve carbon buildup and other performance issues over time.
This kit provides two configuration options:
-
Block-Off Version ā Completely seals the factory head ports to prevent oil intrusion and unwanted vacuum leaks.
-
Billet Check Valve Version ā Converts the head ports into a robust internal PCV system using precision-engineered check valves. These one-way valves allow vacuum to function as intended while blocking boost pressure from entering the crankcase or charge tract.
By bypassing the factory PCV valve in the valve cover, the VTT kit replaces it with an improved three-valve internal system integrated directly into the cylinder head. This design improves reliability, simplifies plumbing, and ensures consistent crankcase pressure management ā critical for both stock and high-performance B58/S58 applications. This kit does NOT require any tapping, meaning no metal to get into the engine etc. You simply tap the plugs or check valves into place.
Key Features
-
Eliminates oil draw-through into the intake manifold
-
Prevents carbon buildup on intake valves
-
Converts to an internal, head-integrated PCV system
-
Utilizes precision-machined check valves for boost sealing
-
Fully reversible ā Block-offs or valves can be removed if needed
- No tapping is required. Easy install, by tapping the blocks or valve into place.
-
-
Sale!Quick View
VTT Plug and Play S58 Single HPFP Conversion Kit
$349.00Original price was: $349.00.$299.00Current price is: $299.00.VTT Plug and Play S58 Single HPFP Conversion Kit
The Only Proven Solution to S58 Exhaust Cam Timing Drift ā Without Locking the Cam! Tested at over 1400WHP!
We are proud to introduce the first and only kit on the market that completely resolves the notorious S58 exhaust cam timing drift at high RPM ā all without sacrificing the benefits of variable valve timing by locking the cam.
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT HIGH-FLOW -16 Catch Can System
$499.00 – $649.00Price range: $499.00 through $649.00VTT -16 Billet HIGH-FLOW Catch Can System
Maximum Venting for Maximum Power
VTT is proud to introduce our -16 Billet High-Flow Catch Can System ā designed from the ground up for high-horsepower applications requiring serious crankcase ventilation. Whether you're pushing over 900WHP or beyond 2000WHP, this system delivers unmatched performance, reliability, and engine bay cleanliness.
Key Features:
-
Supports -16 AN lines (with optional -12 or -20 fittings)
- 20 Fluid OZ capacity
-
Engineered for big-power builds needing high crankcase pressure relief
-
Triple-stage filtration system to eliminate oil mist ā even in the event of engine failure
-
Designed, tested, and proven to keep oil inside the catch can ā not in your engine bay
Triple Filtration Technology:
-
Stage 1 - Stainless steel filter ā captures 95% of oil mist on entry
-
Stage 2 - Perforated diffuser plate ā further disperses and slows down airflow
-
Stage 3 - Final stainless mesh layer ā scrubs out any remaining vapor before venting
This advanced system has been tested with over 200 PSI of pressure and more than half a quart of oil without releasing a trace of oil mist. As long as the catch can is properly serviced and not overfilled, even catastrophic engine failure wonāt result in a mess under your hood.
Application-Specific Kits Available:
We offer plug-and-play kits for popular platforms, including:
-
G8X M2/M3/M4 (S58) SINGLE TURBO ONLY
-
F9X X3M/X4M SINGLE SINGLE TURBO ONLY
-
A9X Toyota Supra
Each kit includes everything needed for installation: catch can, vehicle-specific bracket, fittings, hoses, and optional drain. Again: Plug-and-play kits include ALL required parts. Bracket, fittings, line, etc. No additional fittings are required except the drain if wanted.
-
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT S58 Plug and Play Coolant Pressure Sensor Kit
$39.99 – $139.99Price range: $39.99 through $139.99VTT S58 Plug-and-Play Coolant Pressure Sensor Kit ā For Single Turbo Setups
Building a high-boost single turbo S58 and need to monitor coolant pressure? VTT has the simplest and most effective solution.
This billet fitting replaces the coolant block-off plug at the front of the head when converting to a single turbo, giving you a clean, direct port to monitor coolant pressure right from the cylinder head.
Just thread your sensor into the included 90Ā° fitting, install it onto the adapter, and mount it in placeāperfect for real-time pressure monitoring via tuning platforms like BM3 Rev2 or others that support external sensor inputs.
š¦ Kit Options:
Available with or without sensor, and includes:
-
ā (1) Billet Coolant Adapter Fitting with 1/8" NPT Threads
-
ā (1) 90Ā° Male-to-Female Fitting for Low-Profile Sensor Mounting
-
ā (Optional) 75 PSI Pressure Sensor with Plug and Terminals
-
-
Quick View
VTT G8X Billet Oil Cooler Adapter Fittings ā Convert to -10AN
Looking to upgrade your G8X to a larger external oil cooler or simply replace the bulky factory hard lines with clean, braided -AN lines? VTT has the solution.
Our Billet Oil Cooler Adapter Fittings allow you to convert both sides of the factory system to -10AN maleāfrom the oil filter housing to the inlets and outlets on the factory oil cooler.
Whether you're building a full drag car with no cooler or a track-focused setup with a large front-mount oil cooler, these adapters paired with our S58 Remote Oil Filter Kit give you full flexibility to configure your oiling system your way.
š§ Kit Includes:
-
(2) Billet -10AN Adapter Fittings (for either the oil filter housing or factory cooler)
Note:
If you're converting both ends (housing and cooler), youāll need 2 kits. -
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT S58 Remote Oil Filter Kit
$149.00 – $399.00Price range: $149.00 through $399.00VTT Remote Oil Filter Kit ā BMW S58
VTT is excited to introduce our Remote Oil Filter Kit for the BMW S58 engineāengineered to simplify oil filter access, streamline plumbing, and reduce weight and complexity. This kit removes the factory oil filter housing and relocates the filter underneath the vehicle, allowing for easy access and the use of a standard spin-on filter.The filter IS ACCESSIBLE even with the aluminum belly pan on, as long as you are not running a stock-style cross over downpipe.
ā ļø Important Note:
This kit deletes the factory oil cooler unless you choose to plumb it back in yourself. It is intended primarily for drag racing applications, where oil cooling is not needed for short-duration runs. For street, circuit, or road racing, an oil cooler is highly recommended. -
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsHigh-Boost Crankcase Ventilation Adapter for BMW Engines Building or running a high-boost, high-powered BMW engine? Boost increases crankcase pressure, which, if left unchecked, can lead to issues such as smoking, power loss, and even engine failure. Adequate venting is essential for optimal performance and engine health. These are designed to connect directly to S58/B58(TU) stock VC, or screw into ANY VTT Billet or Cast VC While some believe a -10AN vent is sufficient for these builds, the truth is: itās not. To address this, we developed a larger, more effective solution for our buildsānow available for everyone. Our Oil CapĀ adapter securely snaps in place, replacing your oil cap and providing a platform for a -16ORB fitting in a variety of configurations. Choose from -12AN to -20AN fittings, depending on your buildās needs. This cap is thicker than our low-profile option so care must be taken when planning hood clearance for the versatile venting options.Key Features:
- Attractive Oil cap design
- Connects to stock S58/B58(TU) VC or VTT Billet/Cast VC
- Vented, comes with multi-hole venting to knock down large oil droplets before they make their way into the catch can system
- High-performance venting: Supports configurations from -12AN to -20AN fittings.
- Customizable: Compatible with various fittings to suit your build.
Important Notes:
- This kit requires you to supply your own hose, hose ends, and catch can to complete the system.
- Some fitting options may require 4ā5 days for shipping, as we keep only select configurations in stock.
- Also fits other platforms such as B48, B46, Mini, etc. DOES NOT FIT Gen 1 B58
-
Quick ViewHigh-Boost Crankcase Ventilation Adapter for S58/B58 Engines Building or running a high-boost, high-powered S58 or B58 engine? Boost increases crankcase pressure, which, if left unchecked, can lead to issues such as smoking, power loss, and even engine failure. Adequate venting is essential for optimal performance and engine health. While some believe a -10AN vent is sufficient for these builds, the truth is: itās not. To address this, we developed a larger, more effective solution for our buildsānow available for everyone. Our low-profile adapter securely snaps in place, replacing your oil cap and providing a platform for a -16ORB fitting in a variety of configurations. Choose from -12AN to -20AN fittings, depending on your buildās needs. At just 10mm thick, this adapter maximizes hood clearance for versatile venting options.
Key Features:
- Low-profile design: Only 10mm thick for maximum hood clearance.
- High-performance venting: Supports configurations from -12AN to -20AN fittings.
- Customizable: Compatible with various fittings to suit your build.
Important Notes:
- This kit requires you to supply your own hose, hose ends, and catch can to complete the system.
- Some fitting options may require 4ā5 days for shipping, as we keep only select configurations in stock.
- Also fit other platforms such as B48, B46, Mini, etc. DOES NOT FIT Gen 1 B58
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsVTT is proud to offer our Pre-Preg Hand Crafted CarbonĀ Fiber engine covers for the S58 engine. These are plug-and-play and snap into the factory mounting studs using the factory rubber mounts. BMW did a fabulous job on the latest engine offerings, but the overuse of plastics leaves the engine bays looking cheap, and unfinished. These carbon fiber engine covers, as well as our carbon fiber strut bars, are the perfect addition for anyone looking to give their engine bay, a polished, and sharp look. Available in Gloss, and Matte finish for the G8X and X3/4M platformsPLEASE NOTE: MUST REUSE FACTORY EMBLEM
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB Extension Harnesses
$49.99 – $104.99Price range: $49.99 through $104.99Need to move your coolant expansion tank to the other side of the vehicle for a single turbo kit you are building, extend Map sensor plugs, or IAT, how about Throttle Body? Don't cut your factory wires. Just get a VTT-FAB extension harness, and plug and play! These come in various lengths and are covered in expanded sheathing with heat shrink on both ends for a long-lasting, good-looking finish. Available:- Coolant Extension for late model BMW 2015+ 5 ft
- Pre-Throttle Map sensor extension harness 2 ft
- Pre-Throttle IAT Sensor extension harness 2 ft
- B58/S58/B48 etc Throttle body extension harness 2 ft
- B58 to S55 Throttle conversion/extension harness 2 ft
- EWG Actuator Extension harness, Various Lengths
- N54 stock MAP to N20 Map sensor extension
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT BMW Plug and Play Pre AND Post throttle 5-Bar (58 psi), 6-Bar(72 psi) Map Sensor Kits
$177.49 – $209.99Price range: $177.49 through $209.99Looking to up your boost limit on just about any BMW vehicle that runs a 3 or 4-wire BMW map sensor including but not limited to S58, B58, N54, N55, S55, S63, B48, B47, B42, B57, B46? We were too, so we decided to make a very easy plug-and-play kit for 3, and 4-wire BMW map sensors. These kits will allow you to completely replace the 3-wire sensor with one of our sensors, leave your stock 4-wire in place for IAT sensing, and move the power, ground, and sensor signal from the factory sensor to our sensor. These sensors have the proper scaling which will allow your tuner to simply change your map sensor scaling in the tune, and the factory ECU will be able to utilize the sensor voltage with no problem. We are offering these in 5 bar (58 psi), and 6 bar (72 psi), and each comes with a plug-and-play harness, and optional fittings for ease of installation.Note: For the S58/B58 our Factory style Pre-Throttle map sensor is also 5 bar, and will work fine coupled with the post throttle kit, but the scaling is different, if you want matching Voltages Pre/Post throttle you can run two of these.
A variety of install pics can be found below and - Here
Scaling PDF Links: 5-Bar / 6-Bar
Features include:- Plug and Play harnesses with no wire splicing
- Output wire for connecting a PI or external controller to your post-throttle map sensor for the most stable signal that is not affected by throttle closure
- Different fittings are available for your plumbing needs.
- Can have matching voltage signals for pre/post throttle for ease of tuning, and boost reference
- B58/S58 etc Pre Throttle - 3 Wire Harness (Charge pipe to 1/8" NPT adapter needed, for B58/S58 90 degree adapter needed to provide sensor clearance)
- B58/S58 Post Throttle - 4 Wire Harness (Boost reference will be needed from manifold to sensor)
- F90 M5 Pre/PostĀ Throttle - 4 Wire Harness (May need to repin) (Boost reference will be needed from manifold to sensor)
- Most all other platforms Pre/Post Throttle - 4 Wire Harness (May need to repin) (Boost reference will be needed from manifold to sensor)
- B58
- S58
- S63/ S63TU
- N63
- N54
- S55
- N55
- N20
- B46
- B48
- B57
- B47
-
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT BMW B58/S58 Custom Carbon Head Gaskets
$1,043.99 – $1,610.99Price range: $1,043.99 through $1,610.99Looking for a head gasket for your BMW that will hold ALL of the boost? So were we, and nothing we tried worked. So we took matters into our own hands and had what we wanted made. These gaskets are made out of carbon material, and use stainless steel fire rings to ensure you are not pushing boost into your water jacket or between cylinders. There are two versions:- One does NOT require a groove to be cut into the block
- One DOES require a groove to be machined into the block to accept the fire ring.
- Custom made to our specs from Carbon material that will form your head/deck, and seal oil/water passages while fire rings, keep boost in the combustion chamber
- FULLY tested in-house on multiple builds to ensure boost level can be achieved
- They are NOT like the other fire ring gaskets on the marker (SCE/Athena) that do not require machine work, we had zero luck with those. THESE FLAT OUT WORK!
- Choose non-machined or machined version
- Different thicknesses are available as a custom order (4-8 week lead time)
- Different Bores Available as a custom order (4-8 week lead time)
For any gaskets NOT in stock expect a 4-8 week lead time as these are custom-made for us. This includes ANY gasket we currently do not have in stock.
-
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB S58 Factory Control EWG Top Mount Single Turbo kit
$6,614.99 – $10,772.99Price range: $6,614.99 through $10,772.99VTT-FAB is proud to offer the premiere top-mount single turbo kit for the G8X S58 platform. This kit is 100% made in the USA at our Hayward, CA facility, and only uses top-of-the-line components. We start with 321 Stainless materials as well as Billet flanges to create a high flowing, and long-lasting manifold. We couple this with our revolutionary factory-controlled external gate system using a Turbosmart 60mm Straight gate. This gives you COMPLETE control of an external wastegate with your factory ECU tune. This means no external boxes to control boost, no mac solenoids, and no vacuum/boost lines. Simply reuse your factory actuator on our adapter, and you have the best flowing, and easiest-to-control system on the market with a true boost range of 0 psi, to whatever your turbo of choice can make.Please inquire about the current build time on kits - Sales@vargasturbo.com
NOTE: EVERY VTT-FAB SINGLE TURBO KIT IS BUILT TO ORDER, AND CANNOT BE CANCELLED ONCE MADE, PLEASE ORDER CAREFULLY.
PLEASE NOTE: GARRETT TURBOCHARGER OPTIONS DO NOT COME WITH WATER COOLING LINES. THEY ARE OIL-COOLED ONLY WHICH IS 100% FINE FOR STREET AND DRAG DUTIES. IF YOU PLAN TO ROAD RACE THE CAR WE SUGGEST ADDING WATER LINES
WE HIGHLY, HIGHLY SUGGEST RUNNING OUR ONE-WAY BREATHER WHEN ADDING A SINGLE TURBO KIT, AS YOU DELETE MOST OF THE PCV SYSTEM, FAILURE TO ADD THIS OR SOME SORT OF CRANKCASE VENTING LIKELY WILL RESULT IN CRANKCASE PRESSURE, AND POSSIBLY SMOKING. YOU CAN ADD ONE FROM THE DROP DOWNS
Features:- Fully Fabbed in-house in Hayward Ca using US-sourced parts
- Full 4" Downpipe for every kit (available in factory style termination or Race 4" single with optional turn down)
- All Tig Welded
- VTT-FAB 6 into BILLET COLLECTOR
- Fully set up for our VTT-FAB factory-controlled turbo smart straight gate. Making this plug-and-play with your existing tuner
- 321 Stainless Weld Els for the ultimate in heat resistance and durability
- 1.25" Primary for lightening spool, and high exhaust gas velocity
- NO external boost control is needed
- That AMAZING 6 into 1 turbo sound that divided housings just dont give you
- The charge pipe is flanged for a Turbosmart or Tial BOV
-
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT “DCS” EWG System for TurboSmart Straight Gates
$755.99 – $1,421.99Price range: $755.99 through $1,421.99VTT is proud to offer our EWG "Direct Control System" or DCS! This is a completely new innovation for people looking to control the highest-flowing wastegate on the market using an existing BMW electronic actuator. This system will allow BMW owners who have a vehicle with Electronic Wastegates from the factory to utilize this system to control an externally wastegated turbo system, AND it will ALSO allow ANY vehicle to use this setup to control your own custom turbo system. This is done by utilizing our custom 7075 Billet aluminum bracket coupled with a Turbosmart Straight gate, and if needed an EWG controller made for us by DCCD Pro. This allows direct external wastegate control over any turbocharger system with or without EWG for the factory. Features:- Utilizes the most current wastegate technology the Turbosmart Straight Gate. This gate allows maximum flow with minimal restriction, low drive pressure, and much more. Full details can be found here - https://www.turbosmart.com/product/electronic-straightgate-esg50-external-wastegate/
- Can be configured in multiple ways, and angles based on how you mount the adapter
- The adapter is 7075 Aluminum which has the strength of steel and weight of aluminum
- All connection fittings, are made from Nitronic 60 which has extremely high temperature and wear properties
- Zero Drive Pressure, no springs, no poppet valves, direct control over the gate using factory ECU logic
- Adaptable to ANY turbo system on any car to provide the ultimate in boost control!
-
Quick ViewLooking to replace your damaged factory BMW Actuator part number - 11658691853 VTT has located and ordered in bulk these actuators, and offer them at a discounted price. These are 100% FACTORY BMW OEM actuators, not aftermarket. Fitment is for the following, but they work to replace basically any BMW Actuator.
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB Billet Oil/Coolant Fittings, and block offs
$21.99 – $41.99Price range: $21.99 through $41.99VTT Universal Turbo Fittings ā Oil & Coolant Solutions for BMW Turbo Builds!
Looking to fabricate your own turbo kit for BMW platforms? Need an easy solution to block off water lines or create custom feed and drain fittings? Look no further! VTT offers a wide range of high-quality oil and coolant fittings to simplify your build. Our fittings are designed for most late-model BMW platforms, providing a plug-and-play solution for custom turbo setups. š Available Fitting Options: š¹ Oil Feed ā -4 AN Male š¹ Oil Drain ā -10 AN Male š¹ Coolant Fittings ā Barbed Male or Block-Off Options -
Sale!
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB Billet Velocity Stack
$35.69 – $45.89Price range: $35.69 through $45.89Running an open turbo, and want to straight out the airflow to the compressor for extra efficiency. Our billet velocity stack is what you need. Backed by physics a Bellmouth or velocity stack will help smooth the air coming into the turbocharger or on NA cars. These are made from 6061-T6, and anodized in a variety of colors and sizes. Currently, we offer 3", 4", and 5" These are suitable to fit any intake tubing or turbocharger inlet with that size. These are available with or without a silicone connector and clamps. Our V-Stacks are also made to extend down on the outside so you can attach a Vibrant S&B or other compatible 7" Filter on the 3"/4" version. Features:- Smooth air before it enters the turbocharger or Intake
- Very low profile, only sticking 2.5" above the turbocharger inlet. Even if you have no room for a filter these will fit
- Fits all turbochargers with a 3", 4" or 5" inlet including PTE Sportsman Cover!
- 3" and 4" version works with Vibrant #10961 7" filter or S&B 1032 FilterĀ if you have room
- 100% billet construction for high-strength
- Anodized for long life, and durability
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB Carbon Fiber Turbo Blanket
$69.99 – $104.99Price range: $69.99 through $104.99Looking to keep the underhood heat down on your single turbo car, or build? We got you covered with our VTT-FAB Carbon Fiber Turbo Blankets. The outer shell is made of Carbon Fiber, and the inner shell is Silica Fiber. For 2500F intermittent / 1800 direct heat rating. We have them in 2 sizes T3, and T4. See fitment below Kit included:- 1 Carbon Blanket of choice
- 2 install springs
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsNeed a Tee fitting for plumbing Vacuum, or Boost lines, Don't want to use cheap plastic ones that can get soft when hard, and brittle after they heat cycle? We didn't either, which is why we machined these high-quality billet tees to solve this issue. Machine from 6061-T6 aluminum, and anodized in black for a long-lasting corrosion-free finish, these tees look great, and will you never have to worry about one failing. We offer them in two sizes, each size has 12mm legs and 3 barbs:- 7.60mm / -4 Push Lock for people looking to use -4 push lock hose or -4 AN hose. This is a perfect fit for those.
- 1/4" For people looking to use 1/4" vacuum tube
-
Quick ViewLooking to go above 45 psi in your BMW-powered vehicle? Looking for a plug-and-play solution? We have you covered with our BMW 5 bar sensor. These will allow 58 psi to be read and are factory plug-and-play. Simply remove your old sensor, replace it with the 5 bar, and have your tuner rescale your map values in both your DME tune and your PI tune if applicable.
These are GENUINE BMW sensors directly from BMW.
PLEASE NOTE: These are GENUINE BMW sensors directly from THE BMW DEALERSHIP, BMW IS PUTTING A BMW STICKER OVER A DENSO BOX, AND SELLING THEM. THESE DO NOT HAVE BMW STAMPS ON THEM. WE HAVE ZERO CONTROL OVER THIS.
-
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT-FAB Billet Mac Solenoid brackets
$49.99 – $53.99Price range: $49.99 through $53.99Building a kit using Mac solenoids to control boost? Need an easy way to mount it? VTT-FAB has you covered with our billet Mac Solenoid brackets. Machined from 6061 billet and anodized in 3 colors, these are the perfect way to mount your Mac valve and look good while doing it. Each kit includes:- One Mac Solenoid bracket (3-Port or 4-Port)
- 2 Allen screws to hold the valve to the bracket
- M6 Moutning Bolt
-
Quick View
S58 Turbocharger Install Kit
$284.99Everything needed to a successful install without having to make a trip to the dealer. -
Select options This product has multiple variants. The options may be chosen on the product page / DetailsQuick ViewVTT BMW S58 G8X M3/M4 – F9X X3M/X4M “GC” Turbocharger Upgrade
$4,409.99 – $4,829.99Price range: $4,409.99 through $4,829.99VTT S58 āGCā / āGC+ā Turbocharger Upgrades
Wheel Sizes / Power Support (Precision style designation)
Model Wheel Size (Comp / Turb) Stock Engine Power Range GC (G25-550 spec) 58/52 Up to 800WHP GC+ (G25-660 spec) 67/54 Up to 950WHP
Ready to take your BMW G8X M3/M4 or F9X X3M/X4M to the next levelāwithout core charges, long lead times, or restrictive factory housings? Look no further. The VTT S58 GC Series turbochargers deliver massive power potential while keeping factory spool characteristics and OE fitment.
We keep what BMW got right, then remove every limitation we identified: restrictive inlets, inefficient bearing housing oiling structure, weak thrust assembly, and everything else bottlenecking S58 power output. We then apply proprietary VTT revisions and cast our housings at OEM-level quality.
The result: true bolt-on S58 turbos that support 800ā950WHP, retain all factory oil/water/downpipe/charge pipe connections, and are proven record-settersāholding the G8X ET + Trap Speed records as of 7/24/22.
-
Quick View
Select options This product has multiple variants. The options may be chosen on the product page / DetailsRunning upgraded stock frame turbos on your S58 powered G8X M3/4 or just looking to maximize airflow on stock turbos? We have you covered with our silicone intake tubes. These completely great rid of every restriction, accordion section, and any other issues designed into the factory pipes, and replaces them with 100% smooth-flowing silicon intake tubes. These are 7 layers, and wire is impregnated to ensure they will never collapse even under extreme vacuum.Ā Design Features:- Smooth bends, and increased area for maximum flow no matter what turbos you are running
- Wire impregnated 7-Layer Silicone for high strength
- Billet anodized connectors for a great look and long-lasting finish
- High-quality German Clamps
- Easy install 30-45 minutes even for a novice
Product categories
- 10% Max Discount
- 15% Max Discount
- BMW
- Diesel
- Dodge V8 Platforms
- Ford
- Honda
- Hurricane I6
- Mercedes
- Mitsubishi
- N/S63TU
- No Discount Products
- Porsche
- Powersports
- Tier OBD
- Toyota
- Uncategorized
- Universal
- VTT
- VTT-FAB
- VTTEV
- VW/VAG